• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2130-2134
• /
• 2014

A kinetic study is reported on nucleophilic substitution reactions of 4-nitrophenyl isonicotinate (7) with a series of cyclic secondary amines in MeCN. The plots of $k_{obsd}$ vs. [amine] curve upward for the reactions with weakly basic amines (e.g., morpholine, 1-(2-hydroxyethyl)piperazine, and piperazine) but are linear for those with strongly basic amines (e.g., piperidine and 3-methylpiperidine). The curved plots for the reactions with the weakly basic amines are typical for reactions reported previously to proceed through uncatalyzed and catalyzed routes with two intermediates (e.g., a zwitterionic tetrahedral intermediate $T^{\pm}$ and its deprotonated form $T^-$). In contrast, the linear plots for the reactions with the strongly basic amines indicate that the catalytic route (i.e., the deprotonation process to yield $T^-$ from $T^{\pm}$ by a second amine molecule) is absent. The Br${\o}$nsted-type plots for $Kk_2$ and $Kk_3$ (i.e., the rate constants for the uncatalyzed and catalyzed routes, respectively) exhibit excellent linear correlations with ${\beta}_{nuc}$ = 0.99 and 0.69, respectively. The effect of amine basicity on the reaction mechanism is discussed in detail.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.149-156
• /
• 2006

Structure of edge flame established in a mixing layer, formed between two uniformly flowing pure $CH_4$ and pure $O_2$ streams, is numerically investigated by employing a detailed methane-oxidation mechanism. The numerical results exhibited the most outstanding distinction of using pure oxygen in the fuel-rich premixed-flame front, through which the carbon-containing compound is found to leak mainly in the form of CO instead of HC compounds, contrary to the rich $CH_4-air$ premixed flames in which $CH_4$ as well as $C_2H_m$ leakage can occur. Moreover, while passing through the rich premixed flame, a major route for CO production, in addition to the direct $CH_4$ decomposition, is found to be $C_2H_m$ compound formation followed by their decomposition into CO. Beyond the rich premixed flame front, CO is further oxidized into $CO_2$ in a broad diffusion-flame-like reaction zone located around moderately fuel-rich side of the stoichiometric mixture by the OH radical from the fuel-lean premixed-flame front. Since the secondary CO production through $C_2H_m$ decomposition has a relatively strong reaction intensity, an additional heat-release branch appears and the resulting heat-release profile can no longer be seen as a tribrachial structure.

• Journal of Life Science
• /
• v.10 no.4
• /
• pp.368-373
• /
• 2000

Enteroviruses in the environment pose a public health risk because they can be transmitted via the fecal-oral route through contaminated water, and low numbers are able to initiate an infection in humans. Because the levels of viruses typically found in environmental water and drinking water are low, they must be concentrated from hundreds to thousands of liters of water. Therefore, the main goal of this study was the development of a rapid, simple and efficient procedure to concentrate, isolate and detect enteroviruses from environmental water samples. Viruses were first concentrated by adsorption to 1 MDS cartridge filter and then eluted with approximately 0.5 liter of 1.5% beef extract/0.05M glycin(pH 9.4). In this study, several procedures to concentrate and purify intact viruses from beef extract obtained from the adsorbent filters were tested. Among them, organic floccuration was the best reliable method for reconcentration. sample volume could be reduced to 200∼400 folds and the efficiency of virus recovery through the procedure was over 72%. Finally, the samples were filtered through a membrane disk filter and then analyzed by either the plaque assay or combined cell culture-polymerase chain reaction.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.215-220
• /
• 2012

ZnO nanoparticles were synthesized through a facile route and were used as ozonation catalysts. With the increase of calcination temperature ($150-300^{\circ}C$), surface hydroxyl groups and catalytic efficiency of asobtained ZnO decreased remarkably, and the ZnO obtained at $150^{\circ}C$ showed the best catalytic activity. Compared with ozonation alone, the degradation efficiency of phenol increased above 50% due to the catalysis of ZnO-150. In the reaction temperatures range from $5^{\circ}C$ to $35^{\circ}C$, ZnO nanocatalyst revealed remarkable catalytic properties, and the catalytic effect of ZnO was better at lower temperature. Through the effect of tertbutanol on degradation of phenol and the catalytic properties of ZnO on degradation of nitrobenzene, it was proposed that the degradation of phenol was ascribed to the direct oxidation by ozone molecules based on solidliquid interface reaction.

• Journal of the Korean Society of Combustion
• /
• v.11 no.1
• /
• pp.19-26
• /
• 2006

Structure of edge flame established in a mixing layer, formed between two uniformly flowing pure $CH_4$ and pure $O_2$ streams, is numerically investigated by employing a detailed methane-oxidation mechanism. The numerical results exhibited the most outstanding distinction of using pure oxygen in the fuel-rich premixed-flame front, through which the carbon-containing compound is found to leak mainly in the form of CO instead of HC compounds, contrary to the rich $CH_4-air$ premixed flames in which $CH_4$ as well as $C_2H_m$ leakage can occur. Moreover, while passing through the rich premixed flame, a major route for CO production, in addition to the direct $CH_4$ decomposition, is found to be $C_2H_m$ compound formation followed by their decomposition into CO. Beyond the rich premixed flame front, CO is further oxidized into $CO_2$ in a broad diffusion-flame-like reaction zone located around moderately fuel-rich side of the stoichiometric mixture by the OH radical from the fuel-lean premixed-flame front. Since the secondary CO production through $C_2H_m$ decomposition has a relatively strong reaction intensity, an additional heat-release branch appears and the resulting heat-release profile can no longer be seen as a tribrachial structure.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.294-299
• /
• 2003

The efficiency of complex slurry preparation route for the development of high performance RS-SiCf/SiC composites has been investigated. The green bodies for RS-SiC and RS-SiCf/SiC composite materials prior to the infiltration of molten silicon were prepared with various C/SiC complex matrix slurries, which associated with both different sizes of starting SiC particles and blending ratios of starting SiC and carbon particles. The reinforcing materials in the composite system were uncoated and C coated Tyranno SA SiC fiber. The characterization of RS-SiC and RS-SiCf/SiC composite materials was examined by means of SEM, EDS and three point bending test. Based on the mechanical property-microstructure correlation, process optimization methodology is discussed.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.231-237
• /
• 2008

Biodegradable poly($\varepsilon$-caprolactone-co-L-lactide)-b-poly(ethylene glycol) (PCLA-b-PEG) copolymers were synthesized via solution polymerization by varying the feed composition of $\varepsilon$-caprolactone ($\varepsilon$-CL) and L-lactide (LLA) ($\varepsilon$-CL: LLA= 10:0, 7:3, 5:5, 3:7, 0: 10). The feed ratio based on weight is in accordance with the copolymer composition except for the case of $\varepsilon$-CL: LLA=3:7 (C3L7), which was verified by $^1H$-NMR. Two different approaches were used for the exceptional case, which is an extension of the reaction time or the sequential introduction of the monomer. A copolymer composition of $\varepsilon$-CL: LLA=3:7 could be obtained in either case. The chemical microstructure of PCLA-b-PEG was determined using the $^{13}C$-NMR spectra and the effect of the sequential structure on the thermal properties and crystallinity were examined. Despite the same composition ratio of the copolymer, the microstructure can differ according to the reaction conditions.

• Biomedical Science Letters
• /
• v.26 no.4
• /
• pp.302-309
• /
• 2020

Human Coxsackievirus B5 (HuCoxV-B5) infection has been associated with various diseases such as myocarditis, aseptic meningitis, hand-foot-and mouth-disease, and insulin-dependent diabetes. HuCoxV-B5 is a virus transmitted through the fecal-oral route and is detected in clinics, aquatic environments, food, shellfish, etc. and is one of the more important viruses in public health because of its incidence rate reported worldwide. In this study, a combination of SYBR Green-based real-time PCR primers for molecular diagnosis including monitoring of HuCoxV-B5 was selected and the optimal reaction conditions were established. Compared with the previously reported TaqMan probe-based real-time PCR method, assessments including a sample applicability test were performed. Results showed that the real-time PCR method developed in this study was suitable for a molecular diagnostic technique for detecting HuCoxV-B5. This study is expected to contribute to efforts in responding to safety accidents in public health because the proposed method facilitates rapid diagnosis of clinical patients. It can also be used as a specific monitoring tool of HuCoxV-B5 in non-clinical areas such as aquatic environments among others.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.5
• /
• pp.657-670
• /
• 2012

Background: Today, numerous telematics technologies, i.e., technologies developed by integrating telecommunications with information processing, are applied in vehicles. One such developmental application of this technology to vehicles is to increase the safety or convenience of drivers by providing them with necessary information such as warnings and information on emergencies and traffic situations. However, under certain conditions, there is a high probability of traffic accidents if the driving workload is high. Nowadays, the navigation system is frequently used in the vehicles, this system provides various information including route to the driver. But, the existing navigation systems are not only considered a driver's reaction but also provide unilaterally to the information regardless of them. Such one-side information service type may miss important information to the driver. In addition, it sometimes interferes safety driving. Objective: To solve this problem, the intelligent navigation system needs to the providing way that it checks the driver's reactions after providing information. Namely, if the driver passes the information received from the navigation, then the intelligent system provides more loudly and more frequently. Method: Therefore, in this study we introduce the intelligent navigation system that it automatically controls modality type and its strength when the driver misses or overlooks the information for their safety and entertainment and we analyze the driver's cognitive responses about the modality type and its strength. Results: To evaluate the effectiveness of the proposed system, we analyzed the reaction time and driving workload for each type of the information, modality and its strength. Also we evaluated the users' subjective satisfaction and understanding based on a questionnaire.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.4
• /
• pp.497-503
• /
• 2022

Spinel ferrites (Ni_xFe_3-xO₄; x = 0.25, 0.5, 0.75 and 1.0) have been prepared at 550℃ by egg white auto-combustion route using egg white at 550℃ and characterized by physicochemical (TGA, IR, XRD, and SEM) and electrochemical (CV and Tafel polarization) techniques. The presence of characteristic vibration peaks in FT-IR and reflection planes in XRD spectra confirmed the formation of spinel ferrites. The prepared oxides were transformed into oxide film on glassy carbon electrodes by coating oxide powder ink using the nafion solution and investigated their electrocatalytic performance for OER in an alkaline solution. The cyclic voltammograms of the oxide electrode did not show any redox peaks in oxygen overpotential regions. The iR-free Tafel polarization curves exhibited two Tafel slopes (b₁ = 59-90 mV decade^-1 and b₂ = 92-124 mV decade^-1) in lower and higher over potential regions, respectively. Ni-substitution in oxide matrix significantly improved the electrocatalytic activity for oxygen evolution reaction. Based on the current density for OER, the 0.75 mol Ni-substituted oxide electrode was found to be the most active electrode among the prepared oxides and showed the highest value of apparent current density (~9 mA cm^-2 at 0.85 V) and lowest Tafel slope (59 mV decade^-1). The OER on oxide electrodes occurred via the formation of chemisorbed intermediate on the active sites of the oxide electrode and follow the second-order mechanism.