• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.433-440
• /
• 2000

Barium ferrite particles were synthesized from Ba(NO$_3$)$_2$, Fe(NO$_3$)$_3$ and KOH mixed solutions using hydrothermal crystallization in supercritical water. The experimental apparatus for production of barium ferrite is a flow-type apparatus. Fine barium ferrite particles were produced because supercritical water causes the metal hydroxides to be rapidly dehydrated before significant growth takes place. The effects of Fe/Ba ratio and reaction time on the formation, particle size, and magnetic properties of barium ferrite were studied. When Fe/Ba ratio were varied from 0.5 to 12, single-phase barium ferrite powder was only produced in the range of 0.5〈Fe/Ba〈2. Also, with elevating reaction time, the BaO.6Fe$_2$O$_3$ particle size grew smaller. Especially, uniform barium hexaferrite particles of size 100-200nm were obtained at 80sec. In this study, therefore, single-phase barium ferrite particles are highly stable and can be produced continuously in a reaction time of less then 2min.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.683-686
• /
• 2009

Slurry phase reaction of elemental silicon with methanol has been studied in the presence of copper using a small amount of cuprous chloride as an activator in DBT (dibenzyltoluene) at various temperatures from 200 ${^{\circ}C}$ to 320 ${^{\circ}C}$. Trimethoxysilane (1a) with a Si-H unit was obtained as the major product and tetramethoxysilane (1b) as the minor product. The reaction worked well using a 0.5 wt % CuCl as an activator. The optimum temperature for this direct synthesis of 1a was 240 ${^{\circ}C}$. Methoxysilanes were obtained in 95% yield with 81% selectivity to 1a from 85% conversion of elemental silicon.

• 대한화학회지
• /
• 제57권6호
• /
• pp.684-690
• /
• 2013

Since a glycerol molecule has three active sites, two ${\alpha}$ and one ${\beta}$ hydroxyl groups; it undergoes condensation by releasing water molecules to produce linear, nonlinear and heterocyclic oligomers. The Gibbs free energy (G), enthalpy (H) and internal energy (E) of 7 diglycerol, 15 triglycerol and 23 tetraglycerol isomers were calculated at B3LYP level of theory using 6-311++G(d, p) basis set, in both gas and aqueous phases. Linear oligomers, ${\alpha}{\alpha}$-diglycerol, ${\alpha}{\alpha}$, ${\alpha}{\alpha}$-triglycerol and ${\alpha}{\alpha}$, ${\alpha}{\alpha}$, ${\alpha}{\alpha}$-tetraglycerol, were found to be the most stable oligomers in aqueous phase. It was found that the stability of cyclic oligomers decreases as the size of their rings increases. Cyclic oligomers are produced by dehydration of the acyclic ones which is an endothermic reaction while its ${\Delta}G$ is negative. The dehydration reaction is less endothermic in aqueous phase.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.55-58
• /
• 1999

Nafion supported catalytic membranes were found to be active, stable and selective in th partial oxidation of propane to oxygenates with H2O2 under mild condition. Addition of Fe2+ in liquid phase enhances the reaction rate. Reaction proceeds according to a radical mechanism based on th electrophilic activation of propane on superacid sites and subsequent reaction of the activated paraffin with OH radicals. The use of a catalytic membrane, which allow separation of the intermediate products from the liquid phase containing the oxidant, was found to be effective to perform selective partial oxidation of propane with high yields to oxygenated products.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.949-954
• /
• 1993

Microstructural development at the ZrO2/NiTi bonding interface and reaction products were examined and identified with SEM and AEM. Ti-oxide, Ti2Ni and Ni2Ti layer were observed whose thickness depends on bonding temperature typically. The development of Ti-oxide layer is related with oxygen ion in ZrO2 and liquid phase Ti2Ni. It is considered that compositional deviation from homogeneity and residual stress caused by thermal expansion mismatch are closely related with the formation of the Ti2Ni phase.

• Bulletin of the Korean Chemical Society
• /
• 제20권12호
• /
• pp.1421-1427
• /
• 1999

4-Hydroxy-4'-methoxyazobenzene and 4-hydroxy-4'-cyanoazobenzene were synthesized from phenol with p-anisidine and p-aminobenzonitrile through a diazotization reaction, respectively. They were reacted with 2-chloroethanol, 2-(2-chloroethoxy)ethanol, or 2-[2-(2-chloroethoxy)ethoxy]ethanol to produce six kinds of new mesogenic alcohols having an azobenzene group that is sensitive to the ultraviolet. Twelve kinds of new photoresponsive monomers with two symmetrical mesogens were prepared by the reaction of the mesogenic alcohols with fumaric acid or maleic acid through a Mitsunobu reaction. The resulting monomers have different length of flexible ethyleneoxy spacer tethered to azobenzene group. The length of the spacer affected their thermal stability, solubility, and phase transition temperature. Structures of the monomers were identified by FT-IR and ¹H-NMR spectra. Their phase transition temperatures and thermal stability were also investigated by a differential scanning calorimetry (DSC) and a thermogravimetric analysis (TGA). From an optical polarizing microscopy, all the prepared monomers except fumarate-1 and maleate-1 were found to show enantiotropic liquid crystallinity with a smectic texture like focal-conic, fan-shaped, and batonnet textures.

• 한국기계가공학회지
• /
• 제18권4호
• /
• pp.41-47
• /
• 2019

The advent of highly integrated, high-power electronics requires low a coefficient of thermal expansion performance to prevent delamination between the heat dissipation material and substrate. This paper reports a preliminary study on the manufacturing technology of gas reaction control composite material, focusing on the prediction of the thermal expansion coefficients of Al-AlN composite materials. We obtained numerical equivalent property values by using finite element analysis and compared the values with theoretical formulas. Al-AlN should become the optimal composite material when the proportion of the reinforcing phase is approximately 0.45.

• Bulletin of the Korean Chemical Society
• /
• 제10권3호
• /
• pp.273-278
• /
• 1989

The gas-phase reactions of methyl formate with anions, $-NH_2,\;-OH,\;-CH_2CN$, are studied theoretically using the AM1 method. Stationary points are located by the reaction coordinate method, refined by the gradient norm minimization and characterized by the determination of Hessian matrix. Potential energy profiles and the stationary point structures are presented for all conceivable processes. Four reaction paths are found to be possible: formyl proton and methyl proton abstractions, carbonyl addition, and $S_N2$ process. For the most basic anion $-NH_2$ the proton abstraction path is favored, while in other case, $OH\;and\;-CH_2CN$, the carbonyl addition paths are favored. In all cases the $S_N2$ process is the most exothermic, but due to the relatively high activation barrier the process can be ruled out.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.269-273
• /
• 1991

High Tc oxide superconductor with a Tc above 100 K has been successfully prepared by solid state reaction method in added-Pb BiSrCaCuO system. As compared with 123 compound, the formation reaction of the high Tc requires long time heat treatment. It is due to the transformation from the low Tc phase to high Tc phase. The sintering just below the melting point of the calcined powder mixture is effective on the formation of the high Tc phase in BiSrCaCuO system to be added with Pb. The growth of the high Tc superconducting phase has a thin plate shape, which is characterized by the c parameter of 37${\AA}$. The formation kinetics is also investigated in the samples with different Bi/Pb ratio and the 30% Pb addition is most preferable for the formation of the high Tc phase. The formation of the high Tc phases is delayed by the excessive addition of Pb. The lattice parameter(c) of the unit cell(both the low and high Tc phases) is increased with increase of Pb.

• Korean Chemical Engineering Research
• /
• 제43권2호
• /
• pp.278-285
• /
• 2005

연속식 유동층 반응기에서 흡착제인 천연망간광석을 이용한 탈황반응과, grain model과 two-phase 이론에 근거한 탈황 모사를 연구하였다. 입자 내의 기공 구조변화를 고려한 grain model을 통하여 탈황 반응시간, 천연망간광석의 입자 크기, 기공 내에서 $SO_2$의 확산속도에 대한 영향을 고찰한 결과, 입자의 기공 내에서 $SO_2$ 가스 확산이 탈황 반응의 가장 중요한 요소로 나타났다. 또한, 연속식 유동층 반응기에서 흡착제인 천연망간광석을 이용한 탈황반응 실험결과는 grain model과 two-phase 이론과 잘 일치하였으며, 탈황 결과를 잘 예측할 수 있었다.