• Journal of Korean Physical Therapy Science
• /
• v.29 no.4
• /
• pp.43-53
• /
• 2022

Background: It is suggested that the decline in functional level due to aging influences the increase in traffic accidents among elderly drivers. Among the functions related to the driving behavior of older drivers, physical function is related to muscle strength and motor control, and aging causes deterioration of motor control and a defect in motor output variability. Method: Data Search The online databases used for literature search are PubMed, ProQuest(PML), NDSL, and literature searches were conducted from April 19 to April 26, 2022. For the search, 'aging', 'driving', and 'braking' were used in the investigation. Results: The physical functions related to the braking ability of elderly drivers were analyzed in muscle strength, reaction ability, motor control, and other related factors. In terms of muscle strength, 3 studies analyzed the above factors. 8 studies analyzed the above factors for response ability. For motor control, two studies analyzed the above factors. In addition, related factors were analyzed in one piece. Conclusion: As a result of the analysis, physical function for reaction ability showed the highest frequency, followed by the strength item with the highest frequency. This study suggests that factors that can increase physical function must be included in the development of a rehabilitation program for the driving ability of the elderly.

• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.164-170
• /
• 2016

Since most of the existing wastewater treatment options lack the ability to treat micro-contaminants, the increased use of pharmaceuticals and personal care products (PPCPs) and release as human waste have become a serious concern in recent years. Constructed wetlands (CWs) are a low-cost technology for wastewater treatment, however, its performance in term of PPCPs removal has not yet been fully investigated. This study aimed to characterize the removal factors and efficiency of acetaminophen (ACT) removal by CWs. The results revealed the decreased concentrations of ACT with increasing hydraulic retention times (HRT) of 0, 3, 5 days. The contribution of removal factors was found to be varied with initial ACT concentration. At the low ACT concentration (i.e. 1 ppb), plant uptake was the dominant, followed by microbial and photolytic removal. In contrast, at the high ACT concentration (i.e. 100 ppb), microbial and photolytic removal were found as dominant factors. On the other hand, hydrogen peroxide ($H_2O_2$) concentration was found at higher level in the plant shoot than in the root probably due to occurrence of the Fenton reaction resulting in PPCPs removal.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.18 no.1
• /
• pp.149-158
• /
• 2012

Purpose: The purpose of this study was to identify the factors influencing mental health among late elementary age children. Methods: The research design was a secondary data analysis. Data were collected from 746 students in grades 5 or 6, and analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation coefficients and stepwise multiple regression with the SPSS/PC 18.0 program. Results: The average score of mental health was $3.42{\pm}0.55$. There were significant differences in mental health according to health status, economic status, scholastic performance, relationships with friends, relationships with the teachers, atmosphere of the home, number of siblings and the source of trouble. Stepwise multiple regression analysis showed influencing factors of stress, negative reaction under stress, self-esteem, teacher support, and friend support support and explained 41.4% of total variance in late elementary age children's mental health. Conclusion: These results may contribute to a better understanding of mental health in late elementary age children. The results of the present study indicate a need to develop nursing interventions to prevent and manage elementary school-age children's negative reaction under stress.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.2
• /
• pp.197-204
• /
• 2016

Objective: The purpose of this study was to analyze the kinematic factors of motion during air pistol shooting. Method: This study aimed to investigate changes in forces during movement and determine the factors that affect changes in force during the first, middle, and last periods of shooting an air pistol. Two ground reaction force systems (force platform), SCATT (a shooting training system), and EMG (electromyogram) to measure the action potentials in the muscles of the upper body were used in this study. Four university air pistol players (age: 19.75 years, height: 175.50 cm, body mass: $69.55{\pm}11.50kg$, career length: $6.25{\pm}6years$) who are training to progress to a higher rank were enrolled. Results: In terms of the actual shooting results, the mean score in the middle section was $42.48{\pm}1.74$ points, higher than those in the first and the last periods when using SCATT. The gunpoint moved 13.48 mm more vertically than horizontally in the target trajectory. With respect to action potentials of muscles measured using EMG, the highest action potentials during the aiming-shooting segments, in order higher to lower, were seen in the trapezius (intermediate region), trapezius (superior region), deltoid (lateral), and triceps brachii (long head). The action potentials of biceps brachii and brachioradialis turned out to be high during grasping motion, which is a preparatory stage. During the final segment, muscle fatigue appeared in the deltoid (lateral), biceps brachii (long head), brachioradialis, and trapezius (intermediate region). In terms of the ground reaction force, during the first period of shooting, there was a major change in the overall direction (left-right $F_x$, forward-backward $F_y$, vertical $F_z$) of the center of the mass. Conclusion: The development and application of a training program focusing on muscle groups with higher muscle fatigue is required for players to progress to a higher rank. Furthermore, players can improve their records in the first period if they take part in a game after warming up sufficiently before shooting in order to heighten muscle action potentials, and are expected to maintain a consistent shooting motion continuously by restoring psychological stability.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.7
• /
• pp.1040-1051
• /
• 1999

The objective of this study was to search out the motive and it's degree of the advertising involvement and to verify how the consumer's reaction have influenced on the effect of the advertising. In this study the questionaries used and objects were 236 working women form 20 to 39 years old. The dates were analyzed by reliability mean standard deviation percentage Duncan test t-test factor analysis correlation ANOVA and regression. The outcome of the analysis can be as follows : 1. Consumer's advertising involvement in the clothing goods was standing on 'Emotional' 'Expressional' or 'Economical' position. Among the factors affecting the consumer'sbehaviors. 'Usefulness' 'Like or Dislike' or 'Uniqueness' are the major 3 bases for perceptive evaluation 'Activity' 'Uncomfortableness' and 'Tranquility' are the 3 factors extracted from consumer's emotional reaction. 2 There was little difference in the size of advertising effect among the cluster types classified by each difference motive of the clothing advertising involvement. 3. Perceptive evaluation of the types of advertising appeal the non-sex-appeal advertising was inclined to "Usefulenss' or 'likes' while the sex-appeal advertising depending rather highy on 'Uniqueness' In respect of emotional reaction "Tranquility' was on non-sex-appeal advertising while more 'Activity' or 'Uncomfortable' feeling were on sex-appeal advertising. 4. In the light of 'advertising style' 'brand image' or 'purchase stimulation' the non-sex-appeal advertising was rather favorable received by the consumer's than the sex-appealing one. 5. All those surrounding factors excluding the 'uniqueness' are closely co-related to purchase stimulation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.3
• /
• pp.396-406
• /
• 1998

The purpose of this study was to classify the types of salespeople in the apparel stores. A questionnaire was administered to 267 fashion sales related persons in apparel store in downtown, Daegu. Data were analyzed by using frequency, i-test, cluster analysis, MANOVA, ANOVA and Duncan test by using J.M.p(v.2.01) Mac. program and SAS for windows(v. 6.02) PC program. The results of this study were as follows: The types of salespeople were classified into 4 types: "complaining type as a salespeople", "sensitive type for other affairs than their duty", "satisfying as a salespeople" and "performance reaction type". There were significant differences in academic background, selling apparel type/apparel store type, and in all factors in job satisfaction/dissatisfaction, attitude toward working condition, customer type, and selling training by the different types of salespeople. Complaining type as a salespeople were dissatisfied with most items related with job attitude and showed negative response as salespeople. Sensitive type for other affairs than their duty responded more keenly to other affairs than their duty and showed the highest dissatisfaction on the job dissatisfaction factors, and showed the most emotional reaction on attitude toward working condition, customer type, and regulation. Satisfying type as salespeople showed the positive and active attitude for their job. Performance reaction type were satisfied with their job as salespeople only when their performance is tangible as sales increases and showed highest satisfaction only on the job satisfaction factors. The necessity of professional training was shown in all types of salespeople.g was shown in all types of salespeople.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.573-580
• /
• 1998

Self-propagating high temperature synthesis (SHS) technique was used to synthesize the spinel phase of $MgAl_2O_4$ from MgO and Al powder. Thermit reaction products of MgO and Al, The reaction products were heat treated at the temperature $800^{\circ}C$ preheating. Processing factors such as DTA/TG, combustium product and maxium temperature, synthesis of MgO and Al from "$MgO+2Al+3/2O_2$\rightarrow$MgAl_2O_4$". An activation energy (${\Delta}H^{\circ}$)-264.8 kcal/mol and reaction of maxium temperature 5634 K was calculated to form a $MgAl_2O_4$ spinel from unreacted materials. Pellet were increased volume 6% after thermit reaction. reaction.

• Journal of the Korean Applied Science and Technology
• /
• v.3 no.2
• /
• pp.29-34
• /
• 1986

The sulfuric acid sulfonation of 2-aminonaphthalene was preformed at $30^{\circ}C{\sim}200^{\circ}C$ for $1{\sim}15$ hours, using $4{\sim}10$ parts of 90% sulfuric acid${\sim}$20% oleum. This reaction was influenced by many factory such as reaction temperature, reaction time, strength of sulfuric acid and amount of sulfuric acid and among these factors, the effect of the reaction temperature was considerable. The main products of this reaction were Dahl's acid (2-aminonaphthalene-5-sulfonic acid, Broenner's-acid (2-aminonaphthalene-6-sulfonic acid), amnio-F-acid(2-aminonapthalene-7-sulfonic acid), and Baden acid (2-aminonaphthalene-7-sulfonic acid) and another isomers such as Tobia's acid (2-aminonaphthalene-1-sulfonic acid) and 2-aminonaphthalene-4-sulfonic acid were not formed. Of these isomeric acids, those containing the sulfonic acid group in an ${\alpha}-position$, namely, Dahl's acid and Baden acid, are simultaneously formed by sulfonation at low-temperature ($30{\sim}100^{\circ}C$), whilst those containing the sulfonic acid group in a ${\beta}$-position, namely, Broenner's acid and amino-F-acid, are formed simultaneously by sulfonation at high temperatures($150^{\circ}{\sim}200^{\circ}$).

• Journal of Environmental Science International
• /
• v.25 no.7
• /
• pp.905-916
• /
• 2016

The characteristics of phenol removal and $UV_{254}$ matters variance were investigated and compared by the variation of operating factors (NaCl concentration, air flow rate, initial phenol concentration) in electrochemical reaction (ER) and dielectric barrier discharge plasma reaction (DBDPR), respectively. The phenol removal rate was shown as $1^{st}$ order both in ER and DBDPR. Also, the absorbance of $UV_{254}$ matters which means aromatic intermediates was analyzed to investigate the complete phenol degradation process. In ER, the phenol degradation and aromatic intermediates production rates increased by the increase of NaCl concentration. However, in DBDPR, the variation of NaCl concentration had no effect on the degradation of phenol and $UV_{254}$ matters. Air flow rate had a little effect on the removal of phenol and the variation of $UV_{254}$ matters in ER. The phenol removal rate in ER was a little higher than that in DBDPR. The produced $H_2O_2$ and $O_3$ amounts in ER were 2 times and 10 times higher than those in DBDPR. The chlorine intermediates ($ClO_2$ and free chlorine) were produced in ER, however, they were not produced in DBDPR.

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.349-352
• /
• 2003

This study examined the correlation of various operational factors including reaction temperature and the quantity of reductant and diluent with the characteristics of powder using $K_2$ TaF$_{7}$ as feed materials, Na as a reductant and KCl/KF as a diluent. Also to control the particle size and shape, external supply system developed, it can provide a feed material and a reductant at a fixed quantity and evaluated the characteristics of tantalum powder. When the external supply system was applied instead of the batch type process that charges feed material, reductant and diluent at the same time, it was possible to induce regular reduction reaction between feed material and reductant, which increased the recovery rate and reduced the mixture of impurities. In particular, the application of the external supply system enabled the control of reaction temperature and reaction speed according to the feeding rate of feed material during reduced reaction, and resultantly it enabled the manufacturing of granular-shaped powder with a regular granularity of 2∼3 ${\mu}{\textrm}{m}$ and purity of 99.5%.