• 한국미생물·생명공학회지
• /
• 제26권4호
• /
• pp.338-344
• /
• 1998

게나 새우 등의 갑각류의 껍질에서 주로 얻어지는 생체적합성이 뛰어난 천연고분자인 chitosan에 음이온 수용성의 함인계 단량체인 mono(2-methacryloyl oxyethyl) acid phosphate를 그라프트 중합시켜 새로운 유도체인 chitosan-g-MAP을 합성하였다. 그라프트중합에서 개시제로는 ceric ammonium nitrate을 사용하여 개시제의 농도, 단량체의 농도, 반응온도, 반응시간에 따른 그라프트율, 단량체의 그라프트효율 및 단량체의 총전환율의 변화를 조사하여 최적조건을 규명하였다. 그라프트율은 개시제농도 3.5$\times$$10^{-3}$ M, 단량체농도 0.19 M, 반응온도 4$0^{\circ}C$에서 가장 높은 값을 나타내었고, 반응시간 4시간이 최적조건 이었다. Chitosan의 유리 아민의 함량과 그라프트된 단량체의 종류에 따른 항균성을 Candida albicans, Trichophyton rubrum 및 Trichophyton violaceum에 대하여 조사한 결과, pH 5.75에서 가장 우수한 항균능이 발현되고, 항균제의 농도에 따른 영향에서는 변형chitosan은 C. albicans와 T. violaceum에 대하여 100%의 우수한 항균력을 나타낸 반면, 탈아세틸화도가 다른 DA70과 DA-90인 chitosan은 T. rubrum균에 대해서만 변형 chitosan 보다 우수한 항균성을 나타내었다.

• KSBB Journal
• /
• 제11권6호
• /
• pp.712-717
• /
• 1996

셀룰라아제, polyoxyethylene 유도체와 maleic acid anhydride의 공중합고분자로 중합한 수식셀룰 라아제를 제조하고, 당화 특성과 효소 반응 속도론 등을 검토하였다. 수식 반응에서, 공중합고분자-효소 질량비가 증가함에 따라 수식률은 증가하며, 질량비 4 이상에서는 수식률이 일정하였다. 이 때 최 대수식률은 55% 이며 최대수식률의 수식생룰라아제 는 75%의 높은 효소활성을 나타내었다. 수식효소와 미수식효소의 당화 실험에서, 수식효소가 전 반응시 간에 걸쳐 미수식효소보다 높은 당화반응안정성을 유지하였으며, 그로 인해 최종 전화율은 수식효소가 더 큰 값을 가졌다. 기질에의 강한 흡착으로 인한 효소 deactivation을 고려한 반응식을 적용한 결과, 생 성환원탕놓도의 실험값과 계산치는 잘 일치하였다. 그로부터 반응속도상수를 구하고 생성환원당농도와 유리효소농도의 모사그래프를 구할 수 있었으며, 반 응시간에 따른 유리효소의 농도를 수치모사한 결과, 미수식효소에 비해 수식효소의 유리효소 농도가 더 높았고 그로 인해 더 높은 당전화율을 나타내였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 추계 총회 및 학술발표회
• /
• pp.92-93
• /
• 1996

PVA membrane was widely used in the dehydration pervaporation process. PVA membrane showed remakable selectivity towed water and an excellent film-forming polymer, with a good resistance to orgamic solvents but it has poor stability in aqueous mixtures. Generally the PVA is manufactured by the hydrolysis reaction from poly vinyl acetate(PVAc) and so the degree of PVA hydrolysis is a major parameter for properties of PVA membrane such as the crystallinity and polarity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.429-432
• /
• 2006

The shrinkage mechanism of high strength concrete is different from that of normal concrete. The shrinkage of normal concrete is subjected to evaporate moisture in concrete, but most shrinkage in high strength concrete is caused by chemical reaction. To analyze shrinkage of concrete exactly, it is necessary to divide drying shrinkage with autogenous shrinkage in terms of degree of hydration, especially in concrete with low W/C ratio. The proposed method can provide a rational basis for prediction of shrinkage in high strength concrete structure.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.583-586
• /
• 2000

Many different oligosaccharides were produced by transferring the fructose residue of sucrose to maltose, cellobiose, lactose and sucrose (self-transfer), where their yields of fructosylated acceptor products accounted for $26{\sim}30%$ (w/w). The maximum conversion yield (30%) was obtained in fructosyl cellobioside formation with 500 g sucrose/l (substrate) and 200 g cellobiose/l (acceptor). These four acceptors gave various products having DP (degree of polymerization) $2{\sim}7$ by successive transfer reactions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.163-170
• /
• 2001

Axle Gearbox of the High Speed Train has rotational degree of freedom centered on the Axle Shaft Center Line, and constrained by the Reaction Arm connected to the Bogie Frame via Resilient Ring made of Rubber. This System is laid on the Power Train and can influence on the Power transmitted from Motor to Axle. The stiffeness of the Resilient Ring have to be selected for the Natural Frequency of this System do not overlap with the Teeth-mating Frequency. To confirm the Design Parameters, Calculation and Experiment were executed and compared.

• 한국간호교육학회지
• /
• 제5권1호
• /
• pp.118-132
• /
• 1999

To improve the effectiveness and efficiency of public health personnel training, we evaluated not only how appropriate the students felt the objectives, contents, methods and multimedia used in the train ing courses, but also how much the students accomplished the objectives and applied skill and knowledge to their own works. We selected 5 courses for the study : Tuberculosis control, Radiological technique, Public health information, Immunization, Mental health management courses used by Kirkpatrick's evaluation model. Reaction evaluation was carried out in final day by questionnaire. The results showed that all of them were very satisfied with educational input and curricula, learn Ing environment. Secondly, we measured the degree of learning achievement on pre and post training by questionaire of specific behavioral objectives. The degree of learning achievement was statistically higher just after training than pre training (paired t-test, p<0.01). Thirdly, evaluation of behavioral change to job was conducted to find out how much students applied skill and knowledge to their own job in 3 months after training by questionnaire. The results of behavioral change evaluation showed that 43.5% of the students who were performing job related with the training courses in 3 months after training applied the learned skill and knowledge to their own job quite well and 37.8% of them applied relatively well, therefore total 81.4% of them applied to their own job. And effectiveness of training for the above mentioned students showed that 41.9 % of them had improved or enforced their jobs after training, 35.5% of them had had no remarkable changes, and 15.7% had newly applied the learned skill and knowledge to their jobs. For evaluating the degree of usefulness of material predistribution in two weeks before training, we compared experimental groups with control groups. The results showed that general reactions are helpful but the degree of learning achievement is no discrepancy.

• Elastomers and Composites
• /
• 제49권3호
• /
• pp.181-190
• /
• 2014

유기과산화물 개시제를 사용하여 ethylene-propylene-diene terpolymer (EPDM)에 단량체 itaconic acid (IA)를 용융 그라프트시켜 그라프트 중합물 EPDM-g-IA을 얻었다. 이 과정에서 효율적인 그라프트 율과 인장강도 특성이 우수한 그라프트 중합물을 얻기 위한 최적의 반응조건과 단량체 및 개시제 농도를 구하는 것은 매우 중요하다. 따라서 본 연구에서는 그라프트 온도 및 시간 등의 반응조건, 개시제 종류 및 함량, 모노머 함량이 EPDM-g-IA의 그라프트 율, 그라프트 효율, 용융흐름지수(MI) 및 겔 함량 등에 미치는 영향을 고찰하였다. 개시제 중에서 2,5-dimethyl-2,5-di(tert-butyl peroxy)-hexane (T-101)가 가장 우수한 그라프트 정도 (1.91 %)를 나타내었으며, IA와 T-101의 함량이 증가함에 따라 그라프트 율은 증가하였다. 또한 그라프트 율은 반응(혼합)온도 및 반응시간이 증가함에 따라 역시 증가하다가 특정 온도/시간 이상에서는 안정화 혹은 약간 감소하는 경향을 나타내었다. 이러한 결과들로부터 최적의 단량체와 개시제 농도는 5wt%와 0.05 wt%이었으며, 최적의 반응온도와 시간은 $160^{\circ}C$와 15분인 것을 알 수 있었다. 이타콘산 그라프트 EPDM은 미반응 EPDM에 비해 인장강도 등의 기계적 물성이 증가함을 확인할 수 있었다.

• 한국운동역학회지
• /
• 제17권2호
• /
• pp.207-216
• /
• 2007

The purpose of this study was to biomechanical analysis Judo's Kuzushi throwing motion in order to increase the effectiveness of Nage-waja(throwing technique). The Tori was a Judo player with 18 years experience(4th degree) while the Uke was a player with 2 years experience(1st degree). The kinematic data was captured using the Vicon motion system (7 cameras) and the kinetics were recorded by force plates(2 AMTI). The following were the results; While leaning to the front the subject's trunk's angle was $14.5^{\circ}$, the lower limbs angle was $23.8^{\circ}$, knee angle was $179.6^{\circ}$ and the vertical reaction of the left leg was 325.42N(BW 0.34) and the right leg was 233.7N(BW 0.47). While leaning back the subject's trunk's angle was $11.3^{\circ}$, the lower limbs angle was $4.1^{\circ}$, knee angle was $1761^{\circ}$ and the vertical reaction of the left leg was 299.53N(BW 0.43) and the right leg was 441.7N(BW 0.64). While leaning to the left the subject's trunk's angle was $30.8^{\circ}$, the lower limbs angle was $2.7^{\circ}$, knee angle was $175.2^{\circ}$ and the vertical reaction of the left leg was 711N(BW 1.03) and the right leg was 9.2N(BW 0.01). While leaning to the right the subject's trunk's angle was $36.5^{\circ}$, the lower limbs angle was $10.4^{\circ}$, knee angle was $175.2^{\circ}$ and the vertical reaction of the left leg was 13.2N(BW 0.02) and the right leg was 694.7N(BW 1.01). While leaning to the left front corner the subject's trunk's angle was $19.8^{\circ}$ (front) and $15.1^{\circ}$ (left), the lower limbs angle was $17.8^{\circ}$ (front) and $2.4^{\circ}$ (left), knee angle was $177.8^{\circ}$ (front) and $173.9^{\circ}$(left), and the vertical reaction of the left leg was 547.4N(BW 0.8) and the right leg was 117.8N(BW 0.17). While leaning to the right front corner the subject's trunk's angle was $15.4^{\circ}$ (front) and $17.7^{\circ}$ (right), the lower limbs angle was $21.1^{\circ}$, (front) and $5.7^{\circ}$ (right), knee angle was $175.5^{\circ}$ (front) and $178.9^{\circ}$(right), and the vertical reaction of the left leg was 53N(BW 0.08) and the right leg was 622.4N(BW 09). While leaning to the left rear corner the subject's trunk's angle was $9.2^{\circ}$ (back) and $13.8^{\circ}$ (left), the lower limbs angle was $2^{\circ}$, (back) and $5.7^{\circ}$ (left), knee angle was $175.5^{\circ}$ (back) and $172.8^{\circ}$(left), and the vertical reaction of the left leg was 698.2N(BW 1.02) and the right leg was 49.6N(BW 0.07). While leaning to the right rear corner the subject's trunk's angle was $8.9^{\circ}$ (back) and $19.6^{\circ}$ (right), the lower limbs angle was ${0.6^{\circ}}_"$ (back) and $3.1^{\circ}$ (right), knee angle was $174.6^{\circ}$ (back) and $175.6^{\circ}$(right), and the vertical reaction of the left leg was 7.2N(BW 0.01) and the right leg was 749.4N(BW 1.09). It was observed that during the Judo motion Kuzushii the range of the COM varied from $26.5{\sim}39.9cm$. It was concluded that the upper body leaned further than the lower body as there was knee extension. There was high left leg reaction forces while leaning to the left and likewise for the right side. It was therefore deduced that the Kuzushi was a more effective throwing technique for the left side.

• 폴리머
• /
• 제32권4호
• /
• pp.390-396
• /
• 2008

조직공학용 생체재료로 사용하고자 가교제 1,3-butadiene diepoxide(BD)를 사용하여 락타이드(LA)와 가교시킨 히아루론산(HA) 고분자를 제조하였다. 가교된 고분자의 락타이드 및 BD 반응도는 핵자기 공명 분광법으로 결정하였다. 반응도와 팽윤도는 LA/HA 몰비 혹은 가교제 농도를 증가시킴에 따라 증가하였다. 탄성률은 가교제 농도가 증가하거나 HA/LA 몰비가 감소함에 따라 감소하였다. 생분해는 2단계로 진행되었으며 BD 농도가 증가할수록 서서히 진행되었다. 첫 단계 분해는 주로 가교구조에 존재하는 에스테르기의 분해에 기인한 것으로 나타났다. 세포 성장 저해는 BD 농도가 증가함에 따라 증가하였다. 세포 독성은 BD 농도가 클 경우 약간 나타났으나 그 값은 6% 미만으로 세포 성장에 큰 문제는 없는 것으로 나타났다.