• Computers and Concrete
• /
• v.33 no.3
• /
• pp.241-250
• /
• 2024

This article investigates the thermal and post-buckling problems of graphene platelets reinforced metal foams (GPLRMF) beams with initial geometric imperfection. Three distribution forms of graphene platelet (GPLs) and foam are employed. This article utilizes the mixing law Halpin Tsai model to estimate the physical parameters of materials. Considering three different boundary conditions, we used the Euler beam theory to establish the governing equations. Afterwards, the Galerkin method is applied to discretize these equations. The correctness of this article is verified through data analysis and comparison with the existing articles. The influences of geometric imperfection, GPL distribution modes, boundary conditions, GPLs weight fraction, foam distribution pattern and foam coefficient on thermal post-buckling are analyzed. The results indicate that, perfect GPLRMF beams do not undergo bifurcation buckling before reaching a certain temperature, and the critical buckling temperature is the highest when both ends are fixed. At the same time, the structural stiffness of the beam under the GPL-A model is the highest, and the buckling response of the beam under the Foam-II mode is the lowest, and the presence of GPLs can effectively improve the buckling strength.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.66 no.4
• /
• pp.51-57
• /
• 2024

This study was conducted on how to simulate runoff, which was done using existing physical models, using an LSTM (Long Short-Term Memory) model based on deep learning. Tancheon, the first tributary of the Han River, was selected as the target area for the model application. To apply the model, one water level observatory and four rainfall observatories were selected, and hourly data from 2020 to 2023 were collected to apply the model. River water level of the outlet of the Tancheon basin was simulated by inputting precipitation data from four rainfall observation stations in the basin and average preceding 72-hour precipitation data for each hour. As a result of water level simulation using 2021 to 2023 data for learning and testing with 2020 data, it was confirmed that reliable simulation results were produced through appropriate learning steps, reaching a certain mean absolute error in a short period time. Despite the short data period, it was found that the mean absolute percentage error was 0.5544~0.6226%, showing an accuracy of over 99.4%. As a result of comparing the simulated and observed values of the rapidly changing river water level during a specific heavy rain period, the coefficient of determination was found to be 0.9754 and 0.9884. It was determined that the performance of LSTM, which aims to simulate river water levels, could be improved by including preceding precipitation in the input data and using precipitation data from various rainfall observation stations within the basin.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.26-31
• /
• 2023

For durability improvement of polymer electrolyte membrane fuel cell (PEMFC) polymer membrane, accelerated durability evaluation methods that can evaluate durability in a short time have been researched and developed. However, the lifespan of fuel cells for large commercial vehicles such as trucks and buses is more than three times that of passenger cars, and the chemical accelerated stress test (AST) time is also longer, reaching 1,500 hours or more. Therefore, in this study, as a method to evaluate the chemical durability of a membrane within a short time, it was examined whether the durability could be predicted by the pristine membrane characteristics. Hydrogen crossover current density (HCCD) and short resistance (SR) were estimated as initial characteristics, and AST time was predicted through the Fenton experiment, which was possible as an out-of-cell experiment for 3 hours. As the HCCD and fluoride ion emission concentration increased, the AST time tended to be linearly shortened, but there was a deviation (R² ≒0.65). When the SR decreased, the AST time showed a linear increase, and the accuracy was high (R² =0.93), so the AST time could be predicted with the initial SR of the membrane.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.35-43
• /
• 2023

Sensory evaluation of shucking pressure, pressure holding time, seeding method, difference in full shucking rate in the aquaculture area and shucking oyster was performed using an ultra-high pressure oyster shucking machine. The reaching time for each target pressure is 2.2-2.4 MPa/sec in the range of 180 MPa to 240 MPa. had a rate of pressure rise. There was a difference of 0.5-1.7℃ in the range of 24-27℃ in the seawater temperature before and after the pressure treatment inside the pressure vessel, but there was no specific increase or decrease in seawater temperature. When only the shucking pressure is increased without the pressure holding time, the critical shucking pressure at which the oyster shell is opened and the flesh is peeled in the range of 200 to 220 MPa. When the critical shucking pressure is reached, the oyster sample in the closed vessel is expected to be shucked by about 40%. If there is no pressure holding time when judged only by full shucking, an increase in pressure of about 1.5 MPa is required to further shuck 3% of the oyster population. The oyster samples cultivated in the south coast of Korea were subject to full shucking under the conditions of 220 MPa shucking pressure and two minutes (120 seconds) of pressure holding time, and the difference in the pressure of the oysters according to the oyster seeding method and the farming area was minute. Finally, the condition of 220 MPa of shucking pressure and three minutes of pressure holding time was the best at 1.52 when the result of the sensory evaluation performed manually was set to 1.0. Next was 1.4 under the conditions of 220 MPa of shucking pressure and one minute of pressure holding time (60 seconds), and 1.3 under the condition of 220 MPa and two minutes of pressure holding time (120 seconds). Therefore, it is considered that the most desirable shucking conditions, considering the efficiency and sensory evaluation results, are the conditions of 220 MPa shucking pressure and two to three minutes of pressure holding time.

• Korean Journal of Ecology and Environment
• /
• v.40 no.2
• /
• pp.264-272
• /
• 2007

Runoff of non-point pollutants has affected bad influence to water quality of river as reaching within short time. For this reason, reducing them prior to reaching aquatic systems or treating them after collection from discharge process of pollutants are desirable for efficient treatment of pollutants. This study was carried out to develop an ecotechnological method to prevent further aggravation of water quality by non-point source through vegetation filter strips. This study has placed a focus on improving infiltration capacity of soil for the optimum condition of vegetation filter strips. Therefore, we used titled soil filter strips instead of vegetation filter strips in this study. The three types of soil tilter strips were used in a bench scale experiment before applying to the field. The reduction efficiency of pollutants in soil filter strips (SS $84.5{\sim}92.5%$, BOD $67.9{\sim}80.6%$, T-N $43.4{\sim}76.6%$, T-P $40.6{\sim}87.4%$, Cu $28.3{\sim}48.1%$ Fe $92.1{\sim}97.7%$, Pb $81.4{\sim}97.3%$) was much higher than that of the controled group. And non-point pollutants reduction efficiency by soil filter strip's forms was estimated to be distinguishing in order of bio material, mixture of sand and gravel and lastly the whole gravel. In the event, the whole reduction efficiency of pollutants on the soil filter strips disclosed good results.

• Journal of Environmental Policy
• /
• v.14 no.4
• /
• pp.3-21
• /
• 2015

This paper attempts to determine the most reasonable and agreeable option for new MRV framework in Post-2020 Climate Regime as well as to develop South Korea strategies to reflect our national circumstances and capacities appropriately. The options for MRV framework considered here are 1) Dual MRV and 2) Unified MRV. We reached the conclusion that the Unified MRV framework may be the most reasonable option in the 2015 agreement in line with the objectives of MRV. To this end, it is essential to develop effective stepwise strategies consisted of: 1) reaching a consensus internally on the Unified MRV framework, 2) developing detailed procedures and methodologies to make the major elements of the Unified MRV framework understandable and predictable, 3) delivering an overview and blueprint to make sure of the flexibility of the Unified MRV framework to reflect the Parties' capacities and national circumstances, 4) ensuring the financial and technical support schemes for developing countries to improve the capacity-buildings of MRV, and 5) developing a realistic road map to successfully implement the Unified MRV scheme within the required time frame. Korea, as a rational mediator between developed and developing countries, should play a leading role in reaching post-2020 agreement.

• Journal of Life Science
• /
• v.6 no.3
• /
• pp.204-212
• /
• 1996

The aim of this study was to evaluate the effects of phosphate, aimno acid, and BSA on in vitro development of mammalian embryos. In vitro-matured and -fertilized(IVM/IVF) bovine embryos were cultured in simple, chemically defined, protein-free medium(mTLP-PVA0. When the phosphate concentration of mTLP-PVA supplemented with 19 amino acid were adjusted to 0.0, 0.10, 0.35, 1.05 and 2.10mM by the concentration of sodium phoshpate, there were no significant different in development ability of IVM/IVF bovine embryos cultured in the medium containing from 0.00 to 1.05mM phosphate until 48 hours post-insemination, However, proportion of embryos developing to $$8-cell and morula at 96 and 144 hours post- insemination, respectively, was significantly increased in the medium with o.35 mM phosphate(p<0.05). There was significant difference between O.10(18%)-0.35(24%)mM phosphate and 1.05(13%)-2.10(1%)mM phosphate in supporting development to blastocyst(p<0.05). When IVM/IVF bovine embryos were cultured in the medium supplemented with 19 amino acids, significant different was observed in the proporton of embryos reaching $$8-cell(49-50%), morula(38-40%) and blastocyst (29-32%) stages at 96, 144, and 192 hours post-insemination, respectively(p<0.05). Glutamine alone had no benefit on embryo development. When BSA was added to mTLP-PVA with 0.35mM phosphate, glutamine and 19 amino acids at 8, 48, 120 hours post-insemination, BSA significantly enhanced the development ability ofb embryos reaching $$2-cell (74-77%), $$8-cell (49-53%), morula(43-47%), and blastocyst(38-42%) stages at 48, 96, 144, and 192 hours post-insemination, respectively, regardless of the time of BSA addition.

• The Journal of Korean Medical History
• /
• v.28 no.2
• /
• pp.37-45
• /
• 2015

Objectives : A quantitative analysis on the vocabulary in the English translation version of Donguibogam. Methods : This study quantitatively analyzed the English-translated texts of Donguibogam with the Corpus-based analysis, and compared the quantitative results analyzing the texts of original Donguibogam. Results : As the results from conducting the corpus analysis on the English-translation version of Donguibogam, it was found that the number of total words (Token) was about 1,207,376, and the all types of used words were about 20.495 and the TTR (Type/Token Rate) was 1.69. The accumulation rate reaching to the high-ranking 1000 words was 83.54%, and the accumulation rate reaching to the high-ranking 2000 words was 90.82%. As the words having the high-ranking frequency, the function words like 'the, and of, is' mainly appeared, and for the content words, the words like 'randix, qi, rhizoma and water' were appeared in multi frequencies. As the results from comparing them with the corpus analysis results of original version of Donguibogam, it was found that the TTR was higher in the English translation version than that of original version. The compositions of function words and contents words having high-ranking frequencies were similar between the English translation version and the original version of Donguibogam. The both versions were also similar in that their statements in the parts of 'Remedies' and 'Acupuncture' showed higher composition rate of contents words than the rate of function words. Conclusions : The vocabulary in the English translation version of Donguibogam showed that this book was a book keeping the complete form of sentence and an Korean medical book at the same time. Meanwhile, the English translation version of Donguibogam had some problems like the unification of vocabulary due to several translators, and the incomplete delivery of word's meanings from the Chinese character-culture area to the English-culture area, and these problems are considered as the matters to be considered in a work translating Korean old medical books in English.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.342-343
• /
• 2013

AlSb is a promising material for optical devices, particularly for high-frequency and nonlinear-optical applications. And AlSb offers significant potential for devices such as quantum-well lasers, laser diodes, and heterojunction bipolar transistors. In this work we study molecular beam epitaxy (MBE) growth of an unstrained AISb film on a GaAs substrate and identify the real-time monitoring capabilities of in situ spectroscopic ellipsometry (SE). The samples were fabricated on semi-insulating (0 0 1) GaAs substrates using MBE system. A rotating sample stage ensured uniform film growth. The substrate was first heated to $620^{\circ}C$ under As2 to remove surface oxides. A GaAs buffer layer approximately 200 nm- thick was then grown at $580^{\circ}C$. During the temperature changing process from $580^{\circ}C$ to $530^{\circ}C$, As2 flux is maintained with the shutter for Ga being closed and the reflection high-energy electron diffraction (RHEED) pattern remaining at ($2{\times}4$). Upon reaching the preset temperature of $530^{\circ}C$, As shutter was promptly closed with Sb shutter open, resulting in the change of RHEED pattern from ($2{\times}4$) to ($1{\times}3$). This was followed by the growth of AlSb while using a rotating-compensator SE with a charge-coupled-device (CCD) detector to obtain real-time SE spectra from 0.74 to 6.48 eV. Fig. 1 shows the real time measured SE spectra of AlSb on GaAs in growth process. In the Fig. 1 (a), a change of ellipsometric parameter ${\Delta}$ is observed. The ${\Delta}$ is the parameter which contains thickness information of the sample, and it changes in a periodic from 0 to 180o with growth. The significant change of ${\Delta}$ at~0.4 min means that the growth of AlSb on GaAs has been started. Fig. 1b shows the changes of dielectric function with time over the range 0.74~6.48 eV. These changes mean phase transition from pseudodielectric function of GaAs to AlSb at~0.44 min. Fig. 2 shows the observed RHEED patterns in the growth process. The observed RHEED pattern of GaAs is ($2{\times}4$), and the pattern changes into ($1{\times}3$) with starting the growth of AlSb. This means that the RHEED pattern is in agreement with the result of SE measurements. These data show the importance and sensitivity of SE for real-time monitoring for materials growth by MBE. We performed the real-time monitoring of AlSb growth by using SE measurements, and it is good agreement with the results of RHEED pattern. This fact proves the importance and the sensitivity of SE technique for the real-time monitoring of film growth by using ellipsometry. We believe that these results will be useful in a number of contexts including more accurate optical properties for high speed device engineering.

• Journal of the Korea Concrete Institute
• /
• v.29 no.3
• /
• pp.315-322
• /
• 2017

The purpose of this study is to investigate experimentally the construction performances and economical evaluation of the self-compacting concrete in actual site work after selecting the optimum mix proportions according to cementitious materials. Slag cement type of 46.5% slag powder and belite cement of 51.4% $C_2S$ content, lime stone powder as binders are selected for site experiment including water cement ratio. Also, test items for optimum mix proportion are as followings ; (1) Slump flow, 500 mm reaching time, V-type flowing time and U-box height (2) Setting time, bleeding, shortening depth and adiabatic temperature rising (3) Mixing time in plant (4) Concrete quantity and cost, quality control in actual concrete work. As test results, (4) Optimum water-cement ratio ; Slag cement type 41.0% and belite cement 51.0% (2) Setting time and bleeding finishing time of slag cement are faster, bleeding content of slag cement is higher, shortening depth and adiabatic temperature rising of belite cement type are lower (3) Optimum mixing time in batcher plant is 75 seconds and concrete productive capacity is about $100{\sim}110m^3/hr$. (4) Belite cement type is lower than slag cement type in material cost 14.0%, and concrete quantity in actual concreting work save 3.3% in case of belite cement type. Therefore, self-compacting concrete of belite cement type is definitely superior to that of slag cement type in various test items without compressive strength development.