• Title/Summary/Keyword: reaching time

검색결과 698건 처리시간 0.022초

The Performance and Evaluation for Recycling of Waste Glass

  • Chang, Tein-Chin;Huang, Jian-Er;Yen, Jia-Huei
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.80-83
    • /
    • 2001
  • According to the EPA in Taiwan report, 9.05 million metric tons of solid wastes were generated in 1999, and the waste glass was accounted of 4.95 percent. However, with the increasing tonnage of disposal cost and existing disposal sites are reaching full capacity, recycling is currently accepted as a sustainable approach to waste management. Therefore, it's essential and urgent that the government in Taiwan establish the recycling and recovery framework for the minimization of the solid waste, reduction of materials and energy consumption, and the encouragement for the reuse, recycle and recovery development. To achieve this Boal, Taiwan has been strived for a long period of time in waste glass recovery and recycle. Waste glass, unlike other kinds of resource waste, is 100% recyclable. The EPA in Taiwan now center on a lot of different kinds of waste glass, such as glass container, flat glass, CRT glass, windshields glass, fluorescent lamps, and waste pesticide glass container. This article will focus on the framework of the recycling market access, and also try to provide some strategies to improve waste glass recycling efficiently.

  • PDF

연속 지진에 의하여 손상된 필로티 RC 건축물의 BRB 보강 전/후의 취약성 평가 (Fragility Assessment of Damaged Piloti-Type RC Building With/Without BRB Under Successive Earthquakes)

  • 신지욱;김준희;이기학
    • 한국지진공학회논문집
    • /
    • 제17권3호
    • /
    • pp.133-141
    • /
    • 2013
  • This paper presents the seismic evaluation and prediction of a damaged piloti-type Reinforced Concrete (RC) building before and after post-retrofitting under successive earthquakes. For considering realistic successive earthquakes, the past records measured at the same station were combined. In this study, the damaged RC building due to the first earthquake was retrofitted with a buckling-restrained brace (BRB) before the second earthquake occurred. Nonlinear Time History Analysis (NTHA) was performed under the scaled intensity of the successive ground motions. Based on the extensive structural response data obtained form from the NTHA, the fragility relationships between the ground shaking intensity and the probability of reaching a pre-determined limit state was were derived. In addition, The the fragility curves of the pre-damaged building without and with the BRBs were employed to evaluate the effect of the successive earthquakes and the post-retrofit effect. Through the seismic assessment subjected to the successive records, it was observed that the seismic performance of the pre-damaged building was significantly affected by the severity of the damage from the first earthquake damages and the hysteresis behavior of the retrofit element.

Accuracy Assessment for Measuring Surface Figures of Large Aspheric Mirrors

  • Kim, Young-Soo;Ahn, Ki-Beom;Park, Kwi-Jong;Moon, Il-Kweon;Yang, Ho-Soon
    • Journal of the Optical Society of Korea
    • /
    • 제13권2호
    • /
    • pp.178-183
    • /
    • 2009
  • At the time that the Keck-I 10m telescope was constructed in 1993, the era of Very Large Telescopes (VLTs) was opened. Now thirteen VLTs are in operation, and the largest of the monolithic mirrors is 8.4 m in diameter. Such monolithic mirrors are mostly aspheric and require high accuracies on the surface figures, reaching up to the diffraction limit. At present, next generation telescopes, Giant telescopes, are being developed. One is the GMT (Giant Magellan Telescope) whose size is 25.4 m in diameter. The primary mirror consists of seven segments figuring elliptical shapes on the surface. The surrounding six segments are off-axis and the edges are steep, as the fast focal ratio is adopted. It means that testing of the mirrors is a challenging task. In this paper, testing methods for the GMT primary mirror are reviewed, and accuracy of measuring devices is assessed. Results and discussions follow.

기능성 미립자의 표면개질방법에 의한 위생지 제조 (Making Hygiene Paper by Surface Modification Method of the Functional Particle)

  • 조준형;김연오;김원덕
    • 펄프종이기술
    • /
    • 제40권2호
    • /
    • pp.29-36
    • /
    • 2008
  • In order to give pulp surfaces anti-bacterial functionality and photo-catalytic deodorant ability, functional pulps was made using a surface modification method with Ag nano-colloidal solution and $TiO_2$ filler. Hygiene paper was made with the specially modified pulp, and anti-bacterial and deodorant tests were carried out. The Ag nano-colloidal solution was coated on the surface of the pulp using the high pressurized gas phase squirt through the spray nozzle mounted on the hybridization system. The surface modified functional pulp was hybridized with the optimum ratio of $TiO_2$(fine particle) to pulp(core particle) under the condition of $6,000{\sim}10,000$ rpm for $3{\sim}7$ minutes in the system. The anti-bacterial functionality of the hygiene paper was confirmed by the halo test in which the formation of the clear zone around the hygiene paper sample was observed. The inhibition growth test using MIC bioscreen C showed the inhibition growth effect of the bacteria as the reaction time was increased. The photo-catalytic effect measurement of the $TiO_2$ for 4 hours of the reaction showed $50{\sim}60%$ of decomposition rate, reaching over 60% for 5 hours of the reaction.

이산 가변구조제어기를 이용한 자율무인잠수정의 심도제어 (Depth Control of an Autonomous Underwater Vehicle with System Uncertainties Based on Discrete Variable Structure System)

  • 이판묵;홍석원;전봉환
    • 한국해양공학회지
    • /
    • 제11권4호
    • /
    • pp.169-179
    • /
    • 1997
  • This paper presents a discrete-time sliding mode control of an autonomous underwater vehicle with parameter uncertainties and long sample interval based on discrete variable structure system. Although conventional sliding mode montrol techniques are robust to system uncertainties, in the case of the system with long sample interval, the sliding control system reveals chattering phenomenon and even makes the system unstable. This paper considers the AUV which acquires position informations from a surface ship through an acoustic telemetry system with a certain discrete interval. The control system is designed on the basis of a Lyapunov function and a sufficient condition of the switching gain to make the system stable is give. Each component of the switching gain can be determined separately one another. The controller is robust to the uncertainties, and reaching condition of the control system is satisfied for any initial condition. This control law is a generalized form of the discrete sliding mode control and reduce the chattering problem considerably. Motion control of the AUV in the vertical plane shows the effectiveness of the proposed technique.

  • PDF

만삭 크기 거대 난소 낭종의 복강경 적출술 (Laparoscopic Extirpation of the Term Sized Huge Ovarian Cyst)

  • 고민환;주현철;권오진;김정숙
    • Journal of Yeungnam Medical Science
    • /
    • 제21권1호
    • /
    • pp.108-113
    • /
    • 2004
  • A 23 years old single nulligravida woman underwent laparoscopic removal of a huge cystic adnexal mass that occupied her entire abdomen, giving the appearance of a full term pregnancy. After anesthesia, a vertical infra-umbilical incision, 1 cm long, was made and a telescope was introduced through the port to determine the status of the intra-abdomen and the surface contour of the mass. A needle tipped with a laparoscopic suction apparatus was inserted into the cyst through the infra-umbilical port, directly under the mass. Subsequently, 3,200 ml of cystic fluid was aspirated without spillage. A huge cyst, reaching to the level of the xyphoid process was effectively excised through the operative laparoscopy after prelaparoscopic drainage. Operation time was 140 minutes and hospital stay was 2 days. There were no complications during hospital stay and after discharge. It seems the size of the cyst is not a criteria for the contraindication of laparoscopic surgery.

  • PDF

Ovarian Cancer in Iranian Women, a Trend Analysis of Mortality and Incidence

  • Sharifian, Abdolhamid;Pourhoseingholi, Mohamad Amin;Norouzinia, Mohsen;Vahedi, Mohsen
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권24호
    • /
    • pp.10787-10790
    • /
    • 2015
  • Background: Ovarian cancer is an important cause of mortality in women. The aim of this study was to evaluate the incidence and mortality rates and trends in the Iranian population and make predictions. Materials and Methods: National incidence from Iranian annual of National Cancer Registration report from 2003 to 2009 and National Death Statistics reported by the Ministry of Health and Medical Education from 1999 to 2004 were included in this study. A time series model (autoregressive) was used to predict the mortality for the years 2007, 2008, 2012 and 2013, with results expressed as annual mortality rates per 100,000. Results: The general mortality rate of ovarian cancer slightly increased during the years under study from 0.01 to 0.75 and reaching plateau according to the prediction model. Mortality was higher for older age. The incidence also increased during the period of the study. Conclusions: Our study indicated remarkable increasing trends in ovarian cancer mortality and incidence. Therefore, attention to high risk groups and setting awareness programs for women are needed to reduce the associated burden in the future.

재즈(Jazz) 이미지를 응용한 패션 디자인 (Fashion Design Applying Jazz Image)

  • 이언주;이연희
    • 복식문화연구
    • /
    • 제13권1호
    • /
    • pp.87-101
    • /
    • 2005
  • Jazz derived from the blacks' work songs and made the frame of Jazz reaching blues and finally arrived at the recent time propagating itself as not only the blacks' music but all human being's music. This study has a purpose to suggest the Jazz image to the fashion design by examining the historical trace of Jazz which is one of popular music received by hearing sense. As for the result of the Jazz's effects by age, rhythmical beauty stressing dresses were in fashion by dance enjoying women in 1920's and dresses giving a mature atmosphere set the fashion in 1930's. in the beginning of 1990's, newly emerging Jazz was reflected to the popular culture along with the historical mode's fashion in the general society. The design's decided with two themes of Jazz Classic and Neo Fusion to modernly and naturally express the pursuit of strong color contrast which associated fast rhythm and lax image such as the counter melody of smooth Jazz. In that result, Jazz image with auditory feelings could suggest the various design motive and new idea to fashion design.

  • PDF

한국유고와 중국고습의 보편성과 특수성에 관한 연구 (The Universality and Uniqueness of Korean you-Go and Chiness You-Go(유.고 an upper grment-a pair of trousers) and Chiness You-Go(유.고))

  • 김미자
    • 복식
    • /
    • 제33권
    • /
    • pp.73-88
    • /
    • 1997
  • In old Korea from the 4th century of 6th cen-tury the lapels of You and upper garment folded slightly. It had tight sleeves and its length was not long reaching to the hips. but from the 7th century the sleeve of You became wider and its length became longer, Chinese You folded very deeply across the breast and its sleeve was tight. The length of Chinese You was short too strectching out to the hips. From the 5th century the sleeve of the Chinese You became wider Chinese trousers with wide crotch appeared in the 4th century during the time when Ezst Jin Dyn-asty ruled China. The upper garments with the wide sleeve was common by the 7th century in China. What is specially noteworthy is that Short-dalnyung appeared in the 5th ∼6th century. In old Korea strings were used to tie the bottoms of the trousers. Trousers with tight crotch did not need the strins. korean trousers with wide lines were narrower than the Chinese trousers at the bottom and it was not necessary to use the strings for people to put them on In China there were both of wide trousers and tight trousers. People tied trousers around the kness with the strings in the formal places but they did not tied the trousers with the strings when they wore the ordinary clothes. Chinese trousers were very wide just like a skirt and they were much wider than wide Korean trousers.

  • PDF

벤처·중소 ICT 기업의 디지털 생태계에서의 글로벌 경쟁력 요인 연구 (A Study of the Competitive Factors of ICT Venture and SMEs in the Global Digital Ecosystem)

  • 이계수;윤현덕
    • 한국IT서비스학회지
    • /
    • 제15권1호
    • /
    • pp.1-18
    • /
    • 2016
  • Recently, in the bio-field success stories of ventures through a biosimilar technology is being excavated. but the growth of ICT industry has been stagnant since reaching a boom in the dissemination of early high-speed internet in 2000s. The purpose of this study is to explore the factors of change of business model and business strategy of ICT ventures and SMEs with the evolution of the digital ecosystem, and to drive the factors to be competitive on the global value chain. The researcher selected an entreprenuership, market-innovation orientation, technology-innovation orientation, and Administration-innovation orientation as internal factors influencing the global competence and healthiness of the ecosystem as external factors. The researcher applied samples of 94 ICT Venture and SMEs to a research model, and adopted 5 hypotheses. The researcher believes that only a few hypotheses were adopted because it takes time for overall innovation orientation of ICT Venture and SMEs to result in the real global competence as the their innovation orientation is still on the level of domestic market. And the researcher also thinks that only healthiness of the ecosystem affected management performances because the companies' performances of the last 3 years were so weak that the correlation between innovation orientation of each company and the performances were not big enough.