• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.106-115
• /
• 1999

Design parameters and goals play important roles in design. Design goals are the required functions of the design elements and explicitly expressed by design parameters. Design parameters also indicate the relations among design elements, by which constraint networks can be constructed and some useful information can be induced. In this study, the mechanical design process is assumed to be the assignment of design goals and their realization through the evolutionary refinement of the design parameters. Thus an integrated design system is proposed to support the process of assigning the design goals and refining the values of the design parameters. In the design system, a genetic engine that utilizes a genetic algorithm is installed to simulate an iterative design process, which leads to an evolutionary design. The genetic engine treats design parameters as genes and design goals as evaluation function. Re-design and design modification are facilitated by the design parameters. The re-design can be activated in the design system by using the information stored in the design parameters when design parameters or goals are changed.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.416-421
• /
• 2001

The domestic reinforcement concrete works have mainly worked the process of re-bar fabrication/assembly on site and re-bar works affected by structural safety, durability, and schedule with form work. Accordingly, This study analyzes the process of re-bar fabrication/assembly on site to apply lean production principles to construction Value Stream Analysis(VSA) is analyzed into value-adding activity and non-value-adding activity on construction process through value analysis and Value Stream Mapping(VSM). In the results, non-value-adding activity generates waste such as the activity steps, labors, equipments, materials, time, and so on. Additionally, push-driven production is investigated making low productivity from the overproduction and so on. To resolve the problems in the process, The purpose of this paper eliminates waste factor through maximizing the value-adding activity generating value added and minimizing non-value adding activity. Particularly, it makes flow production and pull-driven production through minimizing work-in-process(WIP ).

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.5
• /
• pp.415-420
• /
• 2018

The development of sail gas has increased the production of ethane as well as natural gas. The decline in the market price for ethane has led to a change in the petroleum-based ethylene production process into an ethane-based ethylene production process and an increase in the ethane/ethylene trade volume. Large-scale ethane/ethylene carrier have been needed due to an increase in long-distance trade from the US, and cargo type change have leaded to consider a liquefaction process to re-liquefy Boil-Off gas generated during the voyage. In this paper, the liquefaction system of Liquefied Ethane Gas carrier was evaluated with Low-GWP (Low-Global Warming Potential) refrigerant and process parameters, Boil-Off Gas pressure and expansion valve outlet pressure, were optimized. Low-GWP refrigerants were propane (R290), propylene(R1270), carbon dioxide(R744) was considered at two type of liquefaction process such as Linde and cascade cycle. The results show that the optimal pressure point depends on the individual refrigerant and the highest liquefaction efficiency of carbon dioxide (R744) - propane (R290) refrigerant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7794-7800
• /
• 2015

Ginsenosides in ginseng berry has been known as functional materials showing physiological effect to the human. Specially, ginseng berry contains plenty of ginsenoside Re, but the study of extraction processes were not enough performed. Accordingly, the purpose of this study was to establish the optimized extraction process for obtaining ginsenoside Re from ginseng berry. The extraction process of ginsenosides was performed in 250 mL extraction flask containing 150 solvent and 10 g of dried ginseng berry. The extracted ginsenoside Re, Rg1 and Rd and total crude ginsenosides from ginseng berry were evaluated by TLC according to the treated conditions (the ratio of alcohol to water, extraction temperature, extraction period, and extraction times). Optimized conditions for extraction was 70% to 30% of the ratio of alcohol to water, $80^{\circ}C$ of extraction temperature, 4 h of extraction period, and 2 times of extraction frequency. The amount of total crude ginsenosides of the extract obtained from the optimized process was 88.6 mg/g based on dried ginseng berry. The composition of ginsenosides from the extracted was 5.5% of Rb1, 5.2% of Rc, 14.3% of Rd, 51.5% of Re, 8.1% of Rf, and 15.7% of Rg1. A protopanaxtriol ginsenosides of whole ginsenosides extracted was about 80%.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.66-74
• /
• 2012

In order to evaluate the feasibility of selective sulfidization of uranium and rare-earth(RE) oxides, an analysis on thermodynamic data, such as $M-O_2-S_2$ phase stability diagram and changes of Gibbs free energy for sulfidization of uranium and rare-earth oxides were carried out. Comparing $RE-O_2-S_2$ with $U-O_2-S_2$ phase stability diagram at wide range of sulfur potential, $UO_2$ remains unreacted, while RE oxides are sulfidized. The Gibbs free energy change(${\Delta}G^{\circ}$) of sulfidization of RE oxides is lower than that of uranium oxides. Thus, the selective formation of RE sulfides is possible during sulfidization of RE and uranium oxides at lower temperature. $CS_2$ was selected as a sulfidizing agent, because it is a stronger sulfidizing agent than other agents and reacts at lower temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05b
• /
• pp.8-11
• /
• 2001

In this study. the recovery of plasma induced damage in the etched PZT thin film with $O_2$ re-annealing have been investigated. The PZT thin films were etched as a function of $Cl_2/Ar$ and additive $CF_4$ into $Cl_{2}(80%)/Ar(20)%$. The etch rates of PZT thin films were $1600\dot{A}/min$ at $Cl_{2}(80%)/Ar(20)%$ gas mixing ratio and $1970\dot{A}/min$ at 30 % additive $CF_4$ into $Cl_{2}(80%)/Ar(20)%$. The etched profile of PZT films was obtained above 70 by SEM. In order to recovery properties of PZT thin films after etching, the etched PZT thin films were re-annealed at various temperatures in $O_2$ atmosphere. From the hysteresis curves, ferroelectrical properties are improved by $O_2$ re-annealing process. The improvement of ferroelectric behavior at annealed sample is consistent with the increase of the (100) and (200) PZT phase revealed by x-ray diffraction (XRD). From XPS analysis, intensity of Pb-O, Zr-O and Ti-O peak are increased and the chemical residue peak is reduced by $O_2$ re-annealing. The ferroelectric behavior consistent with the dielectric nature of TixOy is recovered by $O_2$ recombination during rapid thermal annealing process. From AFM images, it shows that the surface roughness of re-annealed sample after etching is improved.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.5
• /
• pp.220-230
• /
• 2018

The objective of this study is to investigate the effect of solution treatment on the microstructure and corrosion behavior of cast AZ91-4%RE magnesium alloy. In the as-cast state, microstructure of the AZ91-4%RE alloy was characterized by intermetallic ${\beta}(Mg_{17}Al_{12})$, $Al_{11}RE_3$ and $Al_2RE$ phase particles distributed in ${\alpha}-(Mg)$ matrix. After solution treatment, the ${\beta}$ particles with low melting point dissolved into the matrix, but Al-RE phases still remained due to their high thermal stabilities. It was found from the immersion and potentiodynamic polarization tests that corrosion rate of the AZ91-4%RE alloy increased after the solution treatment. On the contrary, EIS tests and EDS compositional analyses on the surface corrosion products indicated that the stability of the corrosion product was improved after the solution treatment. Examinations on the corroded microstructures for the ascast and solution-treated samples revealed that dissolution of the ${\beta}$ particles which play a beneficial role in suppressing corrosion propagation, would be responsible for the deterioration of corrosion resistance after the solution treatment. This result implies that the microstructural features such as amount, size and distribution of secondary phases that determine corrosion mechanism, are more influential on the corrosion rate in comparison with the stability of surface corrosion product.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.108-113
• /
• 2020

Pinions are generally heavy and integrated with a shaft. Thus, fabricating a pinion is a material- and machining-intensive task characterized by low productivity. Contact of the output pinion with a sliding surface or a cloud contact causes loss of power because of friction. Consequently, the output pinion undergoes considerable wear and tear at its ends, which adversely affects the overall transmission efficiency of decelerators. To improve transmission efficiency and extend gear life, an optimum output pinion design is required. To this end, in this study, an output pinion for worm gear decelerators was designed and optimized by means of product verification through prototyping and performance evaluation to improve gear life and productivity. The optimized design was validated and subjected to structural analysis.

• Korean Journal of Materials Research
• /
• v.12 no.9
• /
• pp.729-734
• /
• 2002

Porous Al metal was produced by batch type casting process. In this foaming process, the viscosity and surface tension of molten Al as two most important factors have been investigated in the temperature range of 680-95$0^{\circ}C$ by the ring method and rotational method respectively. The experimental results showed that both the surface tension and viscosity of the melt decreased linearly with increasing temperature. Addition of Ca decreased surface tension, but increased viscosity significantly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.48-51
• /
• 2004

In this paper the importance of re-nitridation on a plasma-enhanced chemical-vapor deposited(PECVD) $SiO_2$ stacked on a thermally grown thin-nitrided $SiO_2$ on n-type 4H SiC have been investigated. Without the final re-nitridation process, the leakage current of metaloxidesemiconductor(MOS) was extremely large. It is believed that water and carbon, contamination from the low-thermal budget PECVD process, are the main factors that destroyed the high quality thin-buffer nitrided oxide. After re-nitridation annealing, the quality of the stacked gate oxide was improved. The reasons of this improvement are presented.