• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.445-448
• /
• 2006

The effects of surface roughness on a spatially-developing turbulent boundary layer (TBL) were investigated by performing direct numerical simulations of TBLs over rough and smooth walls. The Reynolds number based on the momentum thickness was varied in the range $Re_{\theta}=300{\sim}1400$. The roughness elements used were periodically arranged two-dimensional spanwise rods, and the roughness height was $k=1.5{\theta}_{in}$, which corresponds to $k/{\delta}=0.045{\sim}0.125$. To avoid generating a rough wall inflow, which is prohibitively difficult, a step change from smooth to rough was placed $80{\theta}_{in}$ downstream from the inlet. The spatially-developing characteristics of the rough-wall TBL were examined. Along the streamwise direction, the friction velocity approached a constant value and a self-preserving form of the turbulent stress was obtained. Introduction of the roughness elements affected the turbulent stress not only in the roughness sublayer but also in the outer layer. Despite the roughness-induced increase of the turbulent stress in the outer layer, the roughness had only a relatively small effect on the anisotropic Reynolds stress tensor in the outer layer. Inspection of the triple products of the velocity fluctuations revealed that introducing the roughness elements onto the smooth wall had a marked effect on vertical turbulent transport across the whole TBL. By contrast, good surface similarity in the outer layer was obtained for the third-order moments of the velocity fluctuations.

• 한국의류학회지
• /
• 제40권3호
• /
• pp.506-515
• /
• 2016

This study examines the digital era's fashion system and defines fashion leaders in the system. The study was based on a theoretical review and a research survey to verify the theoretical findings. The results are follows. The critical changes in the fashion system are expansion, cyclical direction and closer distance between producer and consumer. By inflow of media to a new channel, a layer of consumers was extended and the range of celebrities participating in the fashion industry has expanded dramatically. Simultaneously with the change from vertical communication to cyclical and interactive, the direction of communication was re-routed through diverse media. Crowd sourcing activated through two-way communication service has increased consumer opportunities to participate in production and consumption. Fashion leaders have changed significantly under this new system. The range of celebrities participating in the fashion system has increased and different fashion leaders have appeared. An interactive and cyclical fashion system has been established through media innovation; consequently, the influential power of celebrities and individuals for direct participation in the fashion system directly has increased significantly.

• 천문학회보
• /
• 제38권1호
• /
• pp.31.2-31.2
• /
• 2013

We use grid-based hydrodynamic simulations to study star formation in nuclear rings in barred galaxies. The gaseous medium is assumed to be infinitesimally thin, isothermal, and unmagnetized. To investigate various situations, we vary the total gas content in the bar regions and the bar growth time. We find that star formation rate (SFR) in a nuclear ring is determined by the mass inflow rate to the ring rather than the total gas mass in the ring. The SFR shows a strong primary burst and weak secondary bursts at early time, and declines to small values at late time. The primary burst is caused by the rapid gas infall to the ring due to the bar growth, with its duration and peak depending on the bar growth time. The secondary bursts result from re-infall of the ejected gas by star formation feedback of the primary burst. When the SFR is low, ages of young star clusters exhibit an azimuthal gradient along the ring since star formation takes place mostly near the contact points between the dust lanes and the nuclear ring. When the SFR is large, on the other hand, star formation is widely distributed throughout the whole length of the ring, with no apparent age gradient of star clusters. Regardless of SFR, star clusters have a positive radial age gradient, with younger clusters located closer to the ring, since the ring shrinks in size over time.

• Journal of Digestive Cancer Research
• /
• 제4권2호
• /
• pp.113-121
• /
• 2016

Background: We evaluated technique of hepatic resections using suprahilar-extrafascial dissection of Glissonean pedicle with vascular stapling device for pedicle transection with intent to minimize operative time and blood loss. Methods: We analyzed the clinical records of 326 patients who underwent anatomic liver resection by suprahilar-extrafascial pedicle isolation with vascular stapling division technique. Results: The minor liver resections were associated with significantly shorter surgery duration (105.1±21.1 vs. 225.6±75.6) and transection time (40.1±14.5 vs. 96.3±55.2) than major hepatectomies (p<0.0001 for all). The mean blood loss was 350.8±100.5 mL in minor resection and 485.4±250.2 mL in major resection (p=0.001). The mean blood transfusion requirement was 400.8±109.5 mL for minor resections and 550.9±100.0 mL for major hepatectomy (p=0.072). There was no significant difference in morbidity and mortality between groups (p=0.980; p=0.945). Major as well as minor liver resection were oncology superior with no significant difference in the 5-year overall survival rates. Conclusion: Suprahilar-extrafascial dissection of Glissonean pedicle represents an effective and safe technique of liver resection. Presented approach allows early and easy ischemic delineation of appropriate liver territory to be removed with selective inflow vascular control. It is not time consuming and it is very useful in re-resection, as well as oncological reasonable.

• 해양환경안전학회지
• /
• 제22권1호
• /
• pp.118-122
• /
• 2016

Froude(Fr) 수의 상사성을 통해 문풀의 크기와 유동 속도를 결정할 경우 축척비에 따라 문풀 내부 유동에 대한 Reynolds(Re) 수가 크게 달라진다. 즉 같은 Fr 수를 갖는다 할지라도 축척비에 따라 문풀 내부 유동 특성이 달라질 수 있음을 의미한다. 본 연구에서는 같은 Fr 수로 상사되었을 때 축척비가 문풀 내부 유동 특성에 미치는 영향을 분석하기 위해 2차원 수치 해석을 수행하였다. 문풀의 크기가 작을 때 문풀에 작용하는 힘은 매우 주기적인 특성을 보이는 반면 문풀의 크기가 커질수록 주기가 일정하지 않은 교란 특성을 보이기 때문에 과도 응답과 통계적 정상 상태의 응답을 구분하기 어려워진다. 주파수 특성에 있어서도 축척비의 제곱근에 반비례하여 나타나는 주파수 특성($f_{0.5}{\approx}{\sqrt{2}}f_1{\approx}2f_{2.0}$)은 Fr 수의 상사성에 따른 유동 특성으로 볼 수 있으나, 문풀의 크기가 클 때 매우 낮은 주파수($f_{2.0}=0.07$)로 문풀 내부에서 매우 강한 와가 발생하는데 이는 축척비에 따른 영향이다.

• 한국습지학회지
• /
• 제20권4호
• /
• pp.424-431
• /
• 2018

강우유출수 내 포함된 입자상 물질, 유기물, 영양물질, 중금속 등의 오염물질은 수계에 악영향을 미친다. 이러한 강우유출수 내 포함된 오염물질 감소와 처리를 위해 최적관리기법(BMP)을 도입하고 있으며, 비용효율적인 방법으로 평가되고 있다. 하지만, 잘못된 설계와 유지관리 부족은 시설의 성능을 저하시켜 원활한 기능을 수행하지 못하고 있는 실정이다. 따라서, 본 연구에서는 지속적인 유지관리가 진행된 침투도랑(IT)의 시설에 대한 평가를 수행하였다. 2009년부터 2016년까지 총 41회의 모니터링을 수행하였으며 침투도랑(IT)의 오염물질 저감효율 평가를 수행하였다. 수질 및 수문학적 분석결과, 시설에 유입되는 유입수는 단위 오염 부하량에 영향을 미치는 요인으로 나타났다. 또한, 계절의 변화는 오염물질 저감능력에 영향을 미치는 것으로 분석되었다. 여름철 강수량 및 강우강도의 증가로 인해 Overflow 및 유량의 증가가 발생되었으며, 이로 인해 저감효율이 감소하였다. 또한, 겨울철 낮은 온도로 인해 여재 및 화학적 메카니즘의 효과 감소로 오염물질 저감 효율이 감소되는 것으로 분석되었다. 침투도랑(IT)의 유지관리는 시설의 효율에 영향을 미치는 것으로 평가되었다. 시설 설치 이후 2년 동안 유지관리 부족으로 오염물질 저감효율이 낮은 것으로 나타났으며, 일부 모니터링에서 지오텍스타일 내 제거 되지 않은 퇴적물로 인해 오염물질 저감효율의 감소를 보였다. 본 연구를 통하여, 시설의 유지관리는 오염물질 저감효과에 영향을 미치는 것으로 나타났으며, BMP 시설의 최적 유지관리 기간 및 방법 등은 향후 유용한 자료로 사용 될 수 있을 것으로 사료된다.

• 대한조선학회논문집
• /
• 제53권5호
• /
• pp.371-379
• /
• 2016

In the ship design process, ship motion and propulsion performance in sea waves became very important issues. Especially, prediction of ship propulsion performance during real operation is an important challenge to ship owners for economic operation in terms of fuel consumption and route-time evaluation. Therefore, it should be considered in the early design stages of the ship. It is thought that the averaged value and fluctuation of effective inflow velocity to the propeller have a great effect on the propulsion performance in waves. However, even for the nominal velocity distribution, very few results have been presented due to some technical difficulties in experiments. In this study, flow measurements near the propeller plane using a stereo PIV system were performed. Phase-averaged flow fields on the propeller plane of a KVLCC2 model ship in waves were measured in the towing tank by using the stereo PIV system and a phase synchronizer with heave motion. The experiment was carried out at fully loaded condition with making surge, heave and pitch motions free at a forward speed corresponding to Fr=0.142 (Re=2.55×106) in various head waves and calm water condition. The phase averaged nominal velocity fields obtained from the measurements are discussed with respect to effects of wave orbital velocity and ship motion. The low velocity region is affected by pressure gradient and ship motion.

• 한국수자원학회논문집
• /
• 제47권6호
• /
• pp.523-536
• /
• 2014

댐의 이수안전도는 물 수요량, 저수량, 가뭄에 의한 유입량에 의해서 주로 영향을 받는다. 그러나 댐 운영방식에 따라 댐의 이수안전도는 차이가 발생할 수 있다. 우리나라의 수자원장기종합계획은 K-WEAP모형을 이용하여 댐 하류의 물부족이 발생하면 물 부족량만큼 공급하는 부족량공급(Deficit supply) 방식을 이용하고 있으나 일정방류(Prime flow) 방식을 적용하면 이수안전도가 달라질 수 있다. 본 연구의 목적은 댐 운영방식에 따른 댐의 이수안전도의 변화를 분석하는 것이다. 이들 결과는 하류의 유지유량공급, 수력 발전을 위하여 일정방류가 고려되는 환경에서 댐의 이수안전도를 재평가하는데 활용될 수 있을 것이다.

• 설비공학논문집
• /
• 제18권12호
• /
• pp.1007-1016
• /
• 2006

Although the advance in electronic technology enables a large number of circuity to be packed in a small volume, it is simultaneously required to remove the high heat load produced by them. In this study, the heat transfer and pressure drop characteristics of a mini-channel heat exchanger, which is designed for liquid cooling of electronic components, are investigated by varying operating conditions. Water and FC-72 were used as working fluids. The mini-channel heat exchanger was made with circular shape channels having din-meters of 2, 3, and 4 mm in regular intervals, and the channel length was 100 mm. The header and inlet guide pathway to provide uniform inflow were attached at the inlet of the test section. Copper block including the heaters was attached at the sidewall of the test section as a heat source, which provided the heat flux from 5 to $15W/cm^2$. The entrance effects enhanced the heat transfer coefficient in the mini-channel significantly. In addition, the single-phase pressure drop in the mini-channel was very similar to that predicted by the laminar flow correlation except that the transition Re decreased due to flow instability in the entrance region.

• 대한조선학회논문집
• /
• 제59권1호
• /
• pp.18-28
• /
• 2022

The turbulence stimulation effect of studs for boundary layer over a flat plate was investigated through the flow measurement in KRISO cavitation tunnel. For the test, Laser Doppler Velocimetry (LDV) and three flat plate models were used: (1) flat plate without studs; (2) flat plate with one stud row; (3) flat plate with two stud rows. The dimension and location of stud rows and the inflow speed were selected considering test conditions for standard-sized model ships in KRISO towing tank. The boundary layer characteristics of test models were analyzed and compared in terms of mean velocity profiles, turbulence intensity profiles, boundary layer thickness, and shape factor. In the case of the flat plate without studs, transition from laminar to turbulent flow occurred around Re_x=3.83 ~ 5.19 × 10⁵. In the case of flat plates with stud rows, the flow rapidly changed into turbulent flow right after passing the first stud row. In the state where turbulence was already developed, the second stud row slightly increased the turbulence intensity near the top of the stud, but did not significantly affect the boundary layer characteristics such as mean velocity distribution, boundary layer thickness, and shape factor.