• Korean Journal of Plant Resources
• /
• v.33 no.4
• /
• pp.255-262
• /
• 2020

The aim of this study was to investigate the correlation between growth characteristics and ginsenoside contents of 7 and 13-year-old wild-simulated ginseng. The results of growth characteristics such as rhizome length, root length, fresh weight, cross-section area, surface area and volume were shows significantly higher in 13-year-old wild-simulated ginseng compare to 7-year-old wild-simulated ginseng. In the case of 11 ginsenoside contents, the contents of G-Rb1, Rb2, Rc, Rd, Re, Rf, Rg1 and Rg2 were shows significantly higher in 13-year-old wild-simulated ginseng compare to 7-year-old wild-simulated ginseng. In addition, in the comparative analysis of ginsenoside contents between wild-simulated ginseng and cultivated ginseng, 13-year-old wild-simulated ginseng was shows significantly higher G-Rb1, Rd, Re, Rf and Rg1 ginsenoside contents compare to 4-year-old and 5-year-old cultivated ginseng. In the result of correlation analysis between growth characteristics and ginsenoside contents, the G-Rb1, Rb2, Rc, Rd, Re, Rf, Rg1, Rg2 ginsenoside was shows significantly positive correlation with rhizome length, fresh weight, cross-section area, surface area, volume, while as the contents of G-Rb1, Re, Rf, Rg2 was shows significantly negative correlation with shoot diameter. The results of this study was might be help to provide useful information on the establish quality standard by the investigate correlation analysis between growth characteristics and ginsenoside content of wild-simulated ginseng.

• 한국초전도학회:학술대회논문집
• /
• v.11
• /
• pp.12-12
• /
• 2001

• Journal of the Korean institute of surface engineering
• /
• v.41 no.3
• /
• pp.88-93
• /
• 2008

Ir-Re thin films with Ti interlayer were deposited onto the tungsten carbide substrate by ion beam assisted DC magnetron sputtering. The Ir-Re films were prepared with targets of having two atomic percent of 7:3 and 5:5. The microstructure and surface analysis of the specimen were conducted by using SEM, XRD and AFM. Mechanical properties such as hardness and adhesion strength of Ir-Re thin film also were examined. The interlayer of pure titanium was formed with 100 nm thickness. The film growth of Ir-30at.%Re was faster than that of Ir-50at.%Re in the same deposition conditions. Ir-Re thin films consisted of dense and columnar structure irrespective of the different target compositions. The values of hardness and adhesion strength of Ir-30at.%Re thin film coated on WC substrate were higher than those of Ir-50at.%Re thin film.

• Journal of the Korean Ceramic Society
• /
• v.36 no.12
• /
• pp.1310-1315
• /
• 1999

• Journal of Magnetics
• /
• v.7 no.1
• /
• pp.14-17
• /
• 2002

Magnetic multilayers of a ferromagnetic (FM)/insulator (I)/ferromagnetic (FM) structure have been studied to investigate magnetic exchange coupling between two FM layers. As the Mumetal $(Ni_{77}Fe_{14}Mo_{5}Cu_4$ wt%) growth temperature increases, the grain size and the surface roughness increase simultaneously. The smallest coupling field is obtained at $40^\circ{C}$ where the grain size is larger than that of the $20^\circ{C}$ sample. The exchange coupling field increases again at temperatures higher than $40^\circ{C}$ due to increase in the surface roughness of the Mumetal.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.40-40
• /
• 2017

Rice (Oryza sativa L.) is one of major crops of Vietnam. Rice plant contains many secondary metabolites that are potent to inhibit growth of other plants. This study was carried out to find potential plant growth inhibitors from rice plants. Seven rice varieties were cultivated in the fields affiliated to Hiroshima University, Japan; Mature stems and leaves from each variety were collected, and then they were extracted with methanol, hexane, ethyl acetate, butanol, and water. Total phenolic content and total flavonoid content were the highest in ethyl acetate extract. DPPH antioxidant assay results showed that the ethyl acetate extract also had higher $IC_{50}$ value. Therefore, the ethyl acetate extracts were selected for laboratory bioassay. Results showed that the two-local variety Re nuoc and Nan chon inhibited the germination of radish and barnyard grass seedlings at the greatest levels, as compared to other cultivars. HPLC quantification indicated that the ethyl acetate extracts of Re nuoc and Nan chon rice plant parts consists of phenolic and flavonoids compounds which are potent as plant growth inhibitors. Further laboratory bioassay and field experimentation will be conducted to validate the laboratory bioassay findings.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.6-14
• /
• 2011

The re-crystallization process for recovering granular crystalline gypsum from phospho-gypsum have proposed. The process consists of two stages; at the first stage, needle-like fine gypsum is recovered with under-product of 325 mesh wet screening after the speedy hydration of dehydrated phospho-gypsum, and at the second stage, granular crystalline gypsum is recovered with upper-product of 325 mesh wet screening after dehydration and re-crystallization of the needle-like fine gypsum in $Na_2SO_4$ solution. This paper is mainly focused on the influence of dehydration time, cooling speed of temperature and re-crystallization temperature on the recovery of granular crystalline gypsum. And the re-crystallization velocity of needle-like fine gypsum at room temperature and the variation of $Ca^{2+}$ concentration of gypsum slurry during over all re-crystallization process were also discussed.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.3
• /
• pp.144-149
• /
• 2008

It has been reported that copper and copper alloys have a large anisotropy of functional properties such as electrical, thermal and mechanical properties, which means that the texture of polycrystalline alloy should be considered to achieve better properties. In this study, the determination of grain growth orientation and texture formation in the cold-rolled, heat-treated and Ni-plated hybrid copper sheets was investigated. Grain growth direction and texture formation were analyzed by the X-ray pole figure. The influence of texture on the mechanical properties could be quantitatively confirmed by the results from the orientation distribution function and the tensile test. The heat-treated texture in the cold-rolled hybrid copper sheet is also investigated and discussed.

• Journal of Korea Foundry Society
• /
• v.20 no.6
• /
• pp.386-394
• /
• 2000

In the present study, the effect of yttrium addition on the microstructure and mechanical property of rapidly solidified AZ91 alloy by melt spinning process is estimated. As yttrium was added, the microstructure of RS ribbons and extrudates became finer than those of AZ91, and RE related phases $(Al_2RE)$ were formed. In the case of the addition of 3wt%Y, the microstructure of extrude showed the finest grain size. At room temperature, the AZ91 + 3wt%Y alloy showed the highest tensile strength, 352 MPA due to precipitation of ${\beta}(Mg_{17}Al_{12})$ phase and $Al_2RE$ phase. At the elevated temperature, the mechanical property of AZ91 + 3wt%Y alloy was higher than those of other Mg alloys. The reasons were that $Al_2Y$ compound was thermally stable and suppressed the grain growth. In contrast with $Al_2Y$ compounds, ${\beta}$ phase was thermally unstable and could not suppress the grain growth at the elevated temperature. Therefore, $Al_2Y$ phase contributed to improve the thermal stability of RS AZ91 alloy.

• Journal of Fashion Business
• /
• v.26 no.4
• /
• pp.136-153
• /
• 2022

The fashion industry is considered hazardous and a threatened to the environment. Due the negative perception, the industry should focus on sustainability as a social role. Therefore, several redesign fashion collaborations mainly focusing on renewing abandoned resources are already in place. The research method was based on previous studies, and 3 characteristics were derived: Redesign collaboration between fashion companies, Redesign collaboration between fashion & heterogeneous industries, and Redesign collaboration between the fashion industry & non-profit organizations. Those 3 characteristics were reviewed using 4 criteria. First, to establish and maximize the sustainable brand image and to be the best examples in environmental management, the organization endeavors to collaborate with various industries, institutions, and designers. Second is the expansion of the customer network through the spread of value consumption. Third is the creation of new values through a resource circulation structure. This means that the resource circulation structure system helps the partners to minimize on wastage. Fourth is the spread of de-boundary lines and the possibility of brand growth. Through collaboration with other industries, the boundaries of materials used in the fashion industry started to blur, thus expanding the continuous brand growth potential. The study derived the characteristics of redesign collaboration by systematically analyzing the cases. Further, the study looks forward to analyzing the characteristics of the products processed by redesign fashion collaborations in future research.