• 한국재료학회지
• /
• 제23권1호
• /
• pp.24-30
• /
• 2013

Today, the modification of carbon foam for high performance remains a major issue in the environment and energy industries. One promising way to solve this problem is the optimization of the pore structure for desired properties as well as for efficient performance. In this study, using a sol-gel process followed by carbonization in an inert atmosphere, hollow spherical carbon foam was prepared using resorcinol and formaldehyde precursors catalyzed by 4-aminobenzoic acid; the effect of carbonization temperature and re-immersion treatment on the pore structure and characteristics of the hollow spherical carbon foam was investigated. As the carbonization temperature increased, the porosity and average pore diameter were found to decrease but the compression strength and electrical conductivity dramatically increased in the temperature range of this study ($700^{\circ}C$ to $850^{\circ}C$). The significant differences of X-ray diffraction patterns obtained from the carbon foams carbonized under different temperatures implied that the degree of crystallinity greatly affects the characteristics of the carbon form. Also, the number of re-impregnations of carbon form in the resorcinol-formaldehyde resin was varied from 1 to 10 times, followed by re-carbonization at $800^{\circ}C$ for 2 hours under argon gas flow. As the number of re-immersion treatments increased, the porosity decreased while the compression strength improved by about four times when re-impregnation was repeated 10 times. These results imply the possibility of customizing the characteristics of carbon foam by controlling the carbonization and re-immersion conditions.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.241-241
• /
• 2005

• 한국결정학회지
• /
• 제11권4호
• /
• pp.231-237
• /
• 2000

CMR Materials RE/sub 1-x/Ca/sub x/MnO₃(RE=La, Nd, A=Ca, Sr) were grown using the floating zone image furnace with halogen lamps as heat source. The growth condition was at 2∼10 mm/hr growth rate in air atmosphere, were 445∼50 rpm and 20∼25 rpm of rotation rate of feedrod and growing crystal, respectively. The grown crystals showed shiny black color and annealed at 1500℃ in a box furnace to release the residual stress during cooling. Characterization analyses of the crystal were carried out using XRD and SEM. The crystal structure of Nd/sub 0.7/Ca/sub 0.3/MnO₃ was analyzed with smart CCD XRD was lattice parameter of a=5.425(4)Å, b=5.434(4)Å, and c=7.712(5)Å, an orthorombic system with space group of pbnm.

• Bulletin of the Korean Chemical Society
• /
• 제13권3호
• /
• pp.235-240
• /
• 1992

The paramagnetic complex of $(CO)_4ReL_2[L_2=$ 2,3-Bis(diphenylphosphino)maleic anhydride] was prepared both by the photochemically induced homolytic splitting of $Re_2(CO)_10withL_2and$ by the chemical reduction of $[(CO)_4ReL_2]SO_3CF_3.$ The $(CO)_4ReL_2$ compound was characterized by ESR spectrum. The spectrum exhibits three group of sextets arising from one $^{185.187}Re$ nucleus (Ⅰ= 5/2) and two equivalent $^31P$ nuclei (Ⅰ= 1/2). Infrared, ESR, and cyclic voltammetric data are reported for all of the complexes prepared in this study.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2001년도 춘계학술발표강연 및 논문개요집
• /
• pp.70-70
• /
• 2001

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.456-456
• /
• 1999

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2000년도 추계학술발표강연 및 논문개요집
• /
• pp.52-52
• /
• 2000

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.812-824
• /
• 2022

This study proposes to develop a 3D printed re-entrant(RE) strip by shape memory thermoplastic polyurethane that can be deformed and recovered by thermal stimulation. The most suitable 3D printing infill density condition and temperature condition during shape recovery for mechanical behavior were confirmed. As the poisson's ratio indicated, the higher the recovery temperature, the closer the poisson's ratio to zero and the better the auxetic properties. After recovery testing for five minutes, it appeared that the shape recovery ratio was the highest at 70℃. The temperature range when the shape recovery ratio appeared to be more than 90% was a recovery temperature of more than 50℃ and 60℃ when deformed under a constant load of 100 gf and 300 gf, respectively. This indicated that further deformation occurred after maximum recovery when recovered at a temperature of 80℃, which is above the glass transition temperature range. As for REstrip by infill density, a shape recovery properties of 100% was superior than 50%. Additionally, as the re-entrant structure exhibited a shape recovery ratio of more than 90%, and exhibited auxetic properties. It was confirmed that the infill density condition of 100% and the temperature condition of 70℃ are suitable for REstrips for applying the actuator.

• Journal of applied mathematics & informatics
• /
• 제31권3_4호
• /
• pp.327-336
• /
• 2013

Generalized Pareto distributions play an important role in re-liability, extreme value theory, and other branches of applied probability and statistics. This family of distribution includes exponential distribution, Pareto distribution, and Power distribution. In this paper we establish some recurrences relations satisfied by the quotient moments of the upper record values from the generalized Pareto distribution. Further a char-acterization of this distribution based on recurrence relations of quotient moments of record values is presented.

• Plant Resources
• /
• 제5권2호
• /
• pp.141-154
• /
• 2002

In this experiment, three kinds of mutations(ge, re, and eml )relating to the size of embryos were used to study their generation, genetic mechanism and developmental characteristics, and the interactions between embryo and endosperm were also examined. Giant embryo mutation comprises 7 kinds including the already isolated ge, and ge-2, which share an identical gene site. The SAM and the size of radicule for the ge showed little difference compared to a normal type. The number of embryo cells did not increased as much as it would affect the size of embryo. Therefore, the enlargement of embryo was due to the enlargement of scutellum that originated from the corpulence of each cell. Both F$_1$' s of re ]and odm 49 formed reduce embryos, and other combinations of hybridization showed all wild type of embryo sizes. Accordingly, the odm 49 must have an identical gene site of re 1, while odm 48 and odm 62 have different gene sites. Their shoots and radicules also shrank by the same ratio, however no sign of physical change was noticed. The size of embryo cell showed no change, while the number of cells was the half of that of wild types. The three gene sites of re represent all of them control the size of the entire embryo forming organs. The eml 1 was defined to have temperature sensibilities that the generation of endosperms was active at a high temperature while that was hampered at a low temperature.