• 제목/요약/키워드: ray-tracing

검색결과 571건 처리시간 0.023초

LCD 백라이트 유닛의 서브 마이크론 회절 격자 도광판의 광 출사 특성 연구 (Feasibility Study of the Light-outcoupling Characteristics of a Diffraction-grating-imprinted Light-guide Plate for an LCD Backlight Unit)

  • 최환영
    • 한국광학회지
    • /
    • 제31권4호
    • /
    • pp.176-182
    • /
    • 2020
  • 서브-미크론 주기의 미세한 회절 격자가 새겨진 도광판을 이용하여 빛을 수직으로 출사시켜 기존 방식에서 사용하는 집광용 프리즘 필름을 대체할 수 있는 가능성에 대하여 연구하였다. 시뮬레이션과 실험을 통해 최적 회절 격자 주기를 결정하였고, 입사되는 빛의 고도각과 방위각에 따라 회절 격자의 투과 모드 효율을 계산하였다. 또한, 회절에 의해 더 많은 빛을 추출할 수 있도록 도광판의 모양과 구성을 제안하여 고도각과 방향각을 최적화하는 두 가지 방식의 효과를 시뮬레이션으로 비교하였다. 광선 추적프로그램을 활용하여 회절 격자 각인 도광판의 휘도 각 분포를 계산하여 실제로 제작된 시제품의 위치별 휘도 각 분포와 비교하였다.

Heliostat 반사거울 설치 및 구동기구 유발 오차에 의한 태양추적오차의 해석 (Analysis of Heliostat Sun Tracking Error due to the Mirror Installation and Drive Mechanism Induced Errors)

  • 박영칠
    • 한국태양에너지학회 논문집
    • /
    • 제29권3호
    • /
    • pp.1-11
    • /
    • 2009
  • Heliostat sun tracking accuracy could be the most important requirement in solar thermal power plant, since it determines the overall efficiency of power plant. This study presents the effect of geometrical errors on the heliostat sun tracking performance. The geometrical errors considered here are the mirror canting error, encoder reference error, heliostat position error. pivot offset and tilt error, gear backlash and mass unbalanced effect error. We first investigate the effect of each individual geometrical error on the sun tracking accuracy. Then, the sun tracking error caused by the combination of individual geometrical error is computed and analyzed. The results obtained using the solar ray tracing technique shows that the sun tracking error due to the geometrical error is varying almost randomly. It also shows that the mirror canting error is the most significant error source, while the encoder reference error and gear backlash are second and the third dominant source of errors.

Sequential detection simulation of red-tide evolution for geostationary ocean color instrument with realistic optical characteristics

  • Jeong, Soo-Min;Jeong, Yu-Kyeong;Ryu, Dong-Ok;Kim, Seong-Hui;Cho, Seong-Ick;Hong, Jin-Suk;Kim, Sug-Whan
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2009년도 한국우주과학회보 제18권2호
    • /
    • pp.49.3-49.3
    • /
    • 2009
  • Geostationary Ocean Colour Imager (GOCI) is the first ocean color instrument that will be operating in a geostationary orbit from 2010. GOCI will provide the crucial information of ocean environment around the Korean peninsula in high spatial and temporal resolutions at eight visible bands. We report an on-going development of imaging and radiometric performance prediction model for GOCI with realistic data for reflectance, transmittance, absorption, wave-front error and scattering properties for its optical elements. For performance simulation, Monte Carlo based ray tracing technique was used along the optical path starting from the Sun to the final detector plane for a fixed solar zenith angle. This was then followed by simulation of red-tide evolution detection and their radiance estimation, following the in-orbit operational sequence. The simulation results proves the GOCI flight model is capable of detecting both image and radiance originated from the key ocean phenomena including red tide. The model details and computational process are discussed with implications to other earth observation instruments.

  • PDF

An Interference Analysis Method with Site-Specific Path Loss Model for Wireless Personal Area Network

  • Moon, Hyun-Wook;Kwon, Se-Woong;Lee, Jong-Hyun;Yoon, Young-Joong
    • Journal of electromagnetic engineering and science
    • /
    • 제10권4호
    • /
    • pp.290-295
    • /
    • 2010
  • In this paper, an interference analysis method with a site-specific path loss model for a wireless personal area network (WPAN) is proposed. The site-specific path loss model is based on geometrical optics and geometric probability to consider both site-specific radio propagation characteristics and a closed-form expression to obtain the mean interference from which the uniformly distributed multiple interferers are derived. Therefore, the proposed interference analysis method can achieve more computational simplicity than the Monte-Carlo (MC) simulation, which uses the ray-tracing (RT) technique. In addition, better accuracy than the conventional interference analysis model that uses stochastic method can also be achieved. To evaluate the proposed method, a signal to the interference-noise ratio with a mean interference concept for uniformly distributed interferers is calculated and compared in two simulation scenarios. As a result, the proposed method produces not only better matched results with the MC simulation using the RT technique than the conventional interference analysis model, but also simpler and faster calculation, which is due to the site-specific path loss model and closed-form expression for interference calculation.

Optics of the light-weight and foldable telescope based on the Fresnel lens

  • Yu, Hyungjoon;Park, Yong-Sun;Chung, Haeun
    • 천문학회보
    • /
    • 제41권1호
    • /
    • pp.57.3-58
    • /
    • 2016
  • We analyze an optical system of a telescope based on Fresnel type objective lens as suggested by Hyde (1999). The Fresnel objective lens can be thin, light-weight and foldable, and therefore it is possible to develop a space telescope with an aperture larger than that of traditional telescopes. Moreover a lens, whatever it is either Fresnel type or conventional, allows much larger fabrication tolerances. We design a medium-sized telescope adopting Fresnel lens as an objective lens for use in space and possibly on the ground. The well-known chromatic aberration of the Fresnel primary lens is corrected by a field lens and another Fresnel lens using Schupmann method. An additional lens is used for forming images. We analyze the chromatic and off-axis aberrations of the proposed system analytically and suggest methods for the minimization of off-axis aberrations and for the operation in wider spectral range. We also conduct ray tracing and optimize the whole optical system with commercial software. Finally we present the design parameters of a telescope with an aperture of 0.5 to 1 meters, enabling diffraction limited operation for a moderate field of view about 10 arc-minutes.

  • PDF

역광전자분광기의 제작 및 그 응용 (Construction of Inverse Photoemission Spectrometer and Its Application)

  • 김정원;김세훈
    • 대한화학회지
    • /
    • 제40권12호
    • /
    • pp.719-723
    • /
    • 1996
  • 고체표면의 비점유 전자에너지 상태를 연구하고자 역광전자분광기를 제작하고 시험하였다. 이 분광기는 초고진공 챔버속에 전자총과 광검출기로 구성되어 있다. 전자총은 궤도 시뮬레이션과 전류 측정을 통해 좋은 집속도와 높은 전류밀도를 가지고 있음을 알 수 있었다. 이 분광기의 전체적인 분해능은 0.74 eV이고, 광검출기의 감도는 약 10 counts/$sec{\cdot}{\mu}A$이다. 하나의 결과로서 Ge(111) 시료의 역광전자분광 스펙트럼은 이론적인 계산결과와 잘 일치하였다.

  • PDF

LCD 제작용 급속 열처리 시스템내의 광학 및 열전달 특성 (Optical and Heat Transfer Characteristics in a Rapid Thermal Annealing System for LCD Manufacturing Procedures)

  • 이성혁;김형준;신동훈;이준식;최영기;박승호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1370-1375
    • /
    • 2004
  • This article investigates the heat transfer characteristics in a RTA system for LCD manufacturing and suggests a way to evaluate the quality of a poly-Si film from the thin film optics analysis. The transient and one-dimensional conductive/radiative heat transfer equation considering wave interference effect is solved to predict surface temperatures of thin films. In dealing with radiative heat transfer, a one-dimensional two-flux method is used and the ray tracing method is also utilized to account for the wave interference effects. It is assumed that each interface is assumed diffusive but the spectral radiative properties are included. It is found that the selective heating region exists for various wavelengths and consequently may contribute to heat the poly-Si film. Using the formalism of the characteristic transmission matrix, the lumped structure reflectance, transmittance, and absorptance are calculated and they are compared with experimental data of the poly-Si film during the SPC process via the FE-RTA (Field-Enhanced RTA) technology.

  • PDF

라디오시티법을 이용한 실내 음향장 해석 연구 (A Study on Room Acoustic Field Analysis using Radiosity Method)

  • 김국현
    • 대한조선학회논문집
    • /
    • 제55권5호
    • /
    • pp.394-400
    • /
    • 2018
  • Various numerical methods have been adopted for indoor noise assessments of ship plant. Acoustical radiosity method is one of the high frequency approaches for acoustic field analysis, which assumes diffuse reflections by boundaries so that it could be efficiently applied to the acoustically diffused indoor space noise analysis. In this study, an acoustic field analysis program has been developed based on radiosity method, which could apply for acoustically large enclosures such as ship's indoor space. For this purpose, the procedure of the acoustical radiosity method has been summarized and implemented to an acoustic field analysis program using MATLAB. Numerical example for a rectangular indoor space has investigated validity of the implemented program. Steady state sound pressure levels calculated for a continuous acoustic source signal have shown good agreement with those by other solutions such as an analytic solution and a ray tracing method. Instantaneous sound pressure levels calculated for an impulsive acoustic signal have provided the clues of direct/reflected acoustic field and reverberation time.

통계적 수중음향 채널에서 트렐리스 부호화된 4-CPFSK의 성능분석 (Performance Analysis of a Trellis coded 4-CPFSK over an Statistical Underwater Acoustic Channel)

  • 강희훈
    • 전자공학회논문지
    • /
    • 제54권6호
    • /
    • pp.140-145
    • /
    • 2017
  • 수중통신을 위한 채널환경은 매우 가혹하다. 주파수 대역폭의 효율적인 사용이 요구되는 수중음향통신에서는 주파수 대역특성이 좋은 변조 신호가 필요하다. 위상편이변조는 전송비트수가 1이나 2비트일 경우 수신측의 잡음에 대한 민감도는 양호한 편이지만 3비트 이상의 전송인 위상편이변조 방식은 스펙트럼 사용효율을 높일 수 있으나 잡음에 민감하게 된다. 1비트나 2비트 전송에 있어 CPFSK는 성능면에서 동기식 위상편이변조와 비슷하지만 스펙트럼의 고주파 성분을 작게 한다. 본 논문에서는 통계적 수중음향채널에서의 트렐리스 부호화 4-CPFSK방식에 대한 성능을 분석한다.

LOD(Level of Detail)를 지원하는 하이브리드 렌더링 모델 (A Hybrid Rendering Model to support LOD(Level of Detail))

  • 김학란;박화진
    • 디지털콘텐츠학회 논문지
    • /
    • 제9권3호
    • /
    • pp.509-516
    • /
    • 2008
  • 컴퓨터 그래픽의 다중 해상도를 지원하는 하이브리드 렌더링 방법을 제안한다. 기본적으로 단말기 환경의 성능과 사용자 요구조건에 따른 그래픽을 위한 다중해상도 방법은 메시를 이용하거나 렌더링 부분에서 텍스쳐의 밉매핑이나 옥트리를 이용한 레이 트레이싱들의 적응 방법이 사용되었다. 본 연구에서는 제안한 하이브리드 렌더링 방법은 지역조명 모델에서 기존의 고로 음영과 평면 음영 라이브러리를 개선한 방법으로 하나의 물체를 이루는 여러 개의 폴리곤에 각각 다른 음영법을 적절하게 적용한다. 실시간 렌더링 시간을 줄일 수 있는 효율적인 대안 방법이 될 수 있으며 이러한 장점이 유비쿼터스 환경에서 다양한 단말기 환경의 그래픽 콘텐츠의 실시간 적응 서비스에 매우 적절하게 사용될 수 있다.

  • PDF