• Journal of Biomedical and Translational Research
• /
• 제19권4호
• /
• pp.103-109
• /
• 2018

Aspergillus luchuensis 34-1 was inoculated into wheat pellets with different conditions of raw materials to produce nuruk. The degree of substrate reactivity improvement of steam treated raw materials compared with that of non-heat treated was analyzed. The water content of the pellet was adjusted to 25% and 35%, and steam treatment for 10 minutes improved the substrate reactivity at 2.1-fold and 3.1-fold, and sterilization was also possible. The characteristics of improvement pellet nuruk were investigated according to the degree of crushing and water content of raw materials according to the temperatures and humidities ($23^{\circ}C$, $30^{\circ}C$ and RH 60%, RH 80%). The pH of the pellet nuruk was higher depending on the temperature, humidity and moisture content of the koji were lower, and the pH of the flour-pellet nuruk was lower than that of 2 mm milling wheat-pellet nuruk according to milling degree. It can be seen that the milling degree affects the growth of mold. The acidity and amino acid were generally higher as fermentation time increased. Also, the higher the incubation temperature, humidity and moisture content, the higher the value. Glucoamylase activity was significantly the highest in moisture content 35% D2b nuruk, cultured at $30^{\circ}C$ and 80% RH for 38 hours. This is higher than the previous reports on glucoamylase of rice-koji or commercial nuruk using fungi isolated from traditional nuruk. From these study, it is expected that making of improvement pellet nuruk would save the fermentation time considerably compared with traditional nuruks.

• Journal of Dairy Science and Biotechnology
• /
• 제31권1호
• /
• pp.21-33
• /
• 2013

The purpose of this study was to improve the production of Mozzarella cheese analogues manufactured using mixtures of soy milk and concentrated raw milk by performing ultrafiltration (UF) and to assess the quality of these cheeses during a 30-day storage period at $4^{\circ}C$, relative to that of Mozzarella cheese manufactured with the traditional method. The solid consistency of Mozzarella cheese analogue prepared from milk mixtures was lower than that of cheese manufactured from raw milk or soy milk and increased during storage, which is considered to be the result of decreasing water levels, as well as with increasing soy milk concentrations. In the Mozzarella cheese analogue generated using the milk mixtures, the fat content decreased with increase in the soy milk concentration, while it decreased during the storage period. Lactose levels were lowest in cheese composed of soy milk or raw milk and processed by UF, and decreased during storage in cheese produced using milk mixtures. In milk mixtures containing soy milk, the protein concentration increased with increasing amounts of raw milk and did not change during the storage period. The water-soluble nitrogen compound level was similar between cheeses and increased only slightly during storage. The amount of non-protein nitrogen compounds was higher in the cheese analogue than in the control cheese and tended to increase during storage. Analysis of the physicochemical traits of the Mozzarella cheese analogue yielded the following results: During storage, titratable acidity levels increased while pH tended to decrease. After analysis using electropherograms, it was classified as ${\alpha}$-, ${\beta}$-, or ${\kappa}$-casein. The results of rheometry tests showed that in the Mozzarella cheese analogue prepared from milk mixtures, with raw milk concentrated by UF, increases in concentration rate lead to lowered hardness, elasticity, cohesiveness, and brittleness. When cheese was produced from milk mixtures and concentrated by UF, meltability increased as the concentration rate increased, although to an extent that was less than that observed for the control cheese, and tended to increase during storage. Sensory evaluation showed that the analogue cheese was much better than the control cheese in terms of formation, appearance, and flavor.

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.510-523
• /
• 2020

본 연구에서는 시설원예 농가 중 지하수 수질에 문제가 있는 농가와 지하수를 원활히 사용하는 농가의 수질 성분을 분석하고 비교하였다. 이를 통해, 국내 수경재배 시설을 대상으로 지하수 수질에 따라 양액 재배용 원수로 사용 가능성을 평가하였다. 지하수 수질에 문제가 없는 농가의 지하수는 평균적으로 pH 6.61, EC 0.27 dS/m, NO3-N 7.64 mg/L, NH4+-N 0.80 mg/L, PO4-P 0.09 mg/L, K+ 6.26 mg/L, Ca2+ 18.57 mg/L, Mg2+ 4.38 mg/L, Na+ 20.85 mg/L, Cl- 18.10 mg/L, S2- 7.97 mg/L, HCO3- 55.06 mg/L, Fe 0.09 mg/L, Mn 0.01 mg/L, Zn 0.04 mg/L, Cu 0.01 mg/L, B 0.04 mg/L, Si4+ 8.93 mg/L, Mo 0.01 mg/L로 나타났으며, 모두 양액 재배용 원수의 수질기준을 만족하였다. 반면, 지하수 수질에 문제가 있는 농가의 경우 대다수의 항목이 양액재배용 원수의 수질기준을 초과하였다. 이러한 성분분석 결과로 보아 작물재배에 적합하지 않은 수질의 지하수를 정수하여 원수로 사용하는 것은 지하수의 재충전, 토양정화 측면에서 효과가 있다고 판단된다. 본 연구결과를 바탕으로 농업용 정수시스템을 구성한다면 우선처리 대상 항목 및 연계 항목을 추측할 수 있어 설계가 용이할 것으로 판단된다. 또한 이러한 농업용 정수시스템을 정착시킨다면 시설원예 단지에서 직접 지하수를 사용하면서 재충전 및 재이용할 수 있고, 결과적으로 지속가능한 농업과 국토 정화에 이바지 할 수 있는 기본 정보를 제공한다.

• 한국수산과학회지
• /
• 제11권3호
• /
• pp.139-146
• /
• 1978

The annual variations of some heavy metal concentrations, Al, Mn, Fe, Cu, Pb, Zn, Cd, Hg were determined on tile day of spring tides in every month from May 1977 to April 1978 at eight stations in the Nagdong River downstream. Samples were taken at intervals of one or two hours from 7 a.m. to 7 p.m. at each station. Annual ranges and means of concentrations of the heavy metals are as follows : aluminium 40.7-3700 ppb, 286 ppb; manganese 10.3-261.5 ppb, 80.8 ppb; iron ND-1237 ppb, 147.7 ppb; copper ND-30.9 ppb, 2.49 ppb; lead ND-29.9 ppb, 1.10 ppb; zinc ND-156.8 ppb, 5.61 ppb; cadmium ND-1.22 ppb, 0.09 ppb; mercury ND-0.37 ppb, 0.02 ppb respectively. In general, the contents of heavy metals except managanese and mercury were higher at the stations above station one, Kupo, though the ranges of the contents showed remarkable difference according to the sampling stations. Annual means of the concentrations of iron and manganese were exceeded already the desirable standards for industrial water and closed to the criteria of raw water for public supply. The values that over the criteria of raw water were sometimes found. Mercury concentration showed comparative high level such as ND-0.37 ppb in annual range but it was not over the environment criterion, 0.5 ppb. Aluminium, iron and mercury showed generally high values in summer period and other metals in winter period, through the patterns of seasonal variations were difference depending on the sampling stations and the kind of metals.

• 대한환경공학회지
• /
• 제35권12호
• /
• pp.877-882
• /
• 2013

최근 음용수를 위한 UF, MF 막의 적용이 증가하고 있다. UF/MF 막은 재래식 수처리 공정에 비하여 원수 수질 변화에도 안정적인 운전이 가능하고 부지 면적이 작으며 자동화 운전이 가능하다는 장점을 가지고 있다. 현재 대부분의 UF/MF 막시설은 고분자 막을 사용하고 있다. 최근 세라믹 막은 고분자막에 비하여 경쟁력이 있다고 알려지고 있다. 세라믹 막은 높은 투과유량과 약품세정 빈도가 작으며 막의 수명 또한 길어 최근 적용 사례가 증가하고 있다. 따라서 본 연구는 MF 세라믹 막 pilot plant를 완속모래여과 정수장에 적용하였다. 본 연구에 사용된 세라믹 Pilot plant는 3개의 계열이 있으며, 각 계열별로 원수와 모래 여과수를 막의 유입수로 각각 사용하였다. 또한 세라믹 막 공정의 최적화를 위하여 전처리 응집공정으로서 PACl 응집제를 사용하였다. 그리고 화학세정(Chemical Enhanced Backwashing, CEB)은 황산 (500 mg/L)과 차아염소산 (200 mg/L)을 1.5일에 1번씩 모든 계열에 주입하여 이루어졌다. 본 연구 결과 세라믹 막 공정의 전처리 응집공정에서 최적의 응집제 사용은 막의 유입수로 원수와 모래 여과수에 대한 막의 flux를 크게 증가시켰다. 또한 본 연구에서 사용된 최적 응집제 주입량에서 차압상승률은 원수(25 mg/L)의 경우 2.173 kPa/cycle이며, 모래 여과수(5 mg/L)의 경우 0.301 kPa/cycle으로 나타났다.

• 상하수도학회지
• /
• 제34권6호
• /
• pp.393-402
• /
• 2020

In the membrane process, it is important to improve water treatment efficiency to ensure water quality and minimize membrane fouling. In this study, a pilot study of membrane process using reservoir water was conducted for a long time to secure high flux operation technology capable of responding to influent turbidity changes. The raw water and DAF(Dissolved Air Flotation) treated water were used for influent water of membrane to analyze the effect of water quality on the TMP (Trans Membrane Pressure) and to optimize the membrane operation. When the membrane flux were operated at 70 LMH and 80 LMH under stable water quality conditions with an inlet turbidity of 10 NTU or less, the TMP increase rates were 0.28 and 0.24 kPa/d, respectively, with minor difference. When the membrane with high flux of 80 LMH was operated for a long time under inlet turbidity of 10 NTU or more, the TMP increase rate showed the maximum of 43.5 kPa/d. However, when the CEB(Chemically Enhanced Backwash) cycle was changed from 7 to 1 day, it was confirmed that the TMP increase rate was stable to 0.23 kPa/d. As a result of applying pre-treatment process(DAF) on unstability water quality conditions, it was confirmed that the TMP rise rates differed by 0.17 and 0.64 kPa/d according to the optimization of the coagulant injection. When combined with coagulation pretreatment, it was thought that the balance with the membrane process was more important than the emphasis on efficiency of the pretreatment process. It was considered that stable TMP can be maintained by optimizing the cleaning conditions when the stable or unstable water quality even in the high flux operation on membrane process.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1100-1106
• /
• 2004

In this report, a self-organizing fuzzy neural network is proposed to control chemical feeding, which is one of the most important problems in water treatment process. In the case of the learning according to raw water quality, the self-organizing fuzzy network, which can be driven by plant operator, is very effective, Simulation results of the proposed method using the data of water treatment plant show good performance. This algorithm is included to chemical feeder, which is composed of PLC, magnetic flow-meter and control valve, so the intelligent control of chemical feeding is realized.

• 환경위생공학
• /
• 제12권1호
• /
• pp.69-75
• /
• 1997

Biological drinking water treatment is widely used in Europe for the removal of ammonia nitrogen and organics. During the last 16 years, the deterioration of the quality of surface waters used to produce drinking water has resulted in the widespread use of ozone-biological treatment in Korea. This study were conducted to determine the effect of media weight and preozonation on the biodegradability enhancement in biological fluidized bed(BFB) using Han river water. When the carbon weight was increased, $NH_{3}-N$ and DOC removal increased, but turbidity and SS removal decreased. To remove turbidity and SS, the bed depth in 40% expansion rate/total bed depth was very important. Preozonation of raw water was not effective in $NH_{3}-N$, but increased in biodegradable organic fraction about 10-30% with 0.425-0.85 mg $O_{3}/mg$ DOC.

• 한국가구학회지
• /
• 제27권2호
• /
• pp.91-95
• /
• 2016

This study was conducted to investigate the relationship between water absorption (or hygroscopic property) and growth rate of rubra oak (Quercus rubra) from 5 different origins of seed (Carleton, Simcoe, Chatham, Bancroft, Unknown). Water absorption at cross section of Quercus rubra was $0.43{\sim}0.92g/cm^2$ and the property was not related with growth rate. Overall equilibrium moisture content of rubra oak were 11.35~11.56% and 15.15~15.83% at $40^{\circ}C$ with 75% and 90% relative humidities, respectively. There was no relationship between growth rate and moisture content(hygroscopy) in rubra oak. Based on the results, Rubra oak can be classified as a low hygroscopic wood grade, and thus might be a good raw material for furniture productions owing to its superior dimensional stability.

• 환경위생공학
• /
• 제23권4호
• /
• pp.13-21
• /
• 2008

With the rise in membrane applications, residuals management has become a growing challenge for membrane system. The primary residuals of MF/UF (microfiltration/ultrafiltration) system results from the wastes generated during backwashing. Many regulatory agencies, utilities, and water process engineers are unfamiliar with the characteristics and methods for treatment and disposal of membrane residuals. Therefore, this study was performed to investigate the backwash residuals water quality from the pressurized system with and without pre-coagulation, and to suggest approaches for the backwash residuals treatment. Pressurized MF system was installed at Guui water intake pumping station and operated with raw water taken from the Han River. We compared performances with and without the recycling backwash residuals at flux conditions, 50 LMH and 90 LMH with and without pre-treatment (coagulation). Based on the results, recycling of backwash residuals in pressurized system with pre-coagulation showed applicability of backwash residuals managements. Moreover, the recovery rate also increased up to over 99%.