• 한국방사선학회논문지
• /
• 제11권4호
• /
• pp.227-234
• /
• 2017

본 연구는 갑상샘 탄성초음파에서 탄성도 점수와 변형비를 이용한 방법이 양성과 악성결절의 감별진단에 유용한지를 평가하였다. 탄성초음파를 시행한 597명을 대상으로 하였으며, 세침흡인세포검사 결과를 바탕으로 후향적인 분석을 하였다. 갑상샘 결절의 양성과 악성에 따른 5단계의 탄성도 점수와 변형비의 차이분석은 카이제곱검정과 Mann-Whitney U test를 실시하였다. ROC 곡선분석을 통해 악성결절의 예측을 위한 탄성도 점수와 변형비의 최적의 cut off 값을 결정하였다. 양성과 악성결절 군의 분류에 따른 탄성도 점수의 동질성 비교와 변형비의 차이검증 결과에서 각각 통계적으로 유의한 차이를 보였으며(p=0.000), ROC 곡선분석에서 양성과 악성결절의 예측을 위한 탄성도 점수와 변형비의 AUC 0.842, 0.700, cut-off 값 3, 2.49로 결정되었다(p=0.001). 따라서 탄성도 점수와 변형비는 갑상샘 결절의 감별진단에 도움을 줄 수 있을 것이다.

• Journal of Life Science
• /
• 제9권1호
• /
• pp.14-16
• /
• 1999

Genetic variability was monitored by random amplified polymorphic DNA-polymerase chain reaction (RAPD-PCR) in dicofol-susceptible (S), dicofol-resistant (R) and its reverse-selected (RS) strains of two-spotted spider mite, of Tetranychus urticae. Before the reverse-selection, RS strain, selected reversely from R strain, was 23-fold resistance ratio at {TEX}$LC_{50}${/TEX} to S strain. The resistance was started to in incline slowly to the resistance level of S strain after one year, and the resistance ratio was 4-fold in the 7 years after then. PCR-amplification of T. urticae DNA showed polymorphism in the amplifications with 12 primers in 100 kinds of arbitrary DNA sequences. RAPD amplification with primer OPR-12 (5`-ACAGGTGCGT-3`) showed amplified bands at 1,000 base pair in the S-and RS-strain, and at 350 base pair in R-strain. The results of polymorphism are genetic variabilities derived from development and selection of resistance in each strain. The peculiarly amplified fragments were guessed to participate in dicofol resistance. From the analysis of genetic similarity, it is inferred the gene composition of S-and RS-strain is much closer than that of R-strain.

• 동력기계공학회지
• /
• 제18권5호
• /
• pp.66-73
• /
• 2014

This study was considered to occur the local wall thinning at elbow which is flowing the steam and high-pressure water of high-temperature. The angle of elbow is ${\Theta}=45^{\circ}$ and $67.545^{\circ}$. The damage behaviors of inner or outer wall thinning elbow under internal pressure were calculated by FEA(finite element analysis). We compared the simulated results by FEA with experimental data. The FEA results are as follows: In the FEA results of three types of wall thinning ratio, the circumferential and longitudinal stresses show the similar values regardless of the angle of elbow, respectively. The circumferential strain was greater at elbow of small angle, but the longitudinal strain was nearly same. The FEM stress of outer wall thinning elbow was slightly higher than that of the inner wall thinning elbow, and strain was also slightly higher. In the experiments, the circumferential strain was increased with the increase in the internal pressure, and increased rapidly on about 0.2% of strain. The longitudinal strain was small. The strain at break was much smaller than 0.2%. In the relation between pressure and eroded ratio, the criteria that can be used safely under operating pressure and design pressure were obtained. The results of FEA were in relatively good agreement with those of the experiment.

• 한국지진공학회논문집
• /
• 제12권1호
• /
• pp.43-55
• /
• 2008

비틂시험에서 전단탄성계수와 감쇠비에 상응하는 변형률 산정의 복잡성은 여러 방법에 의하여 해결되어 왔다. 특히, 수정 등가반경법은 공진주/비틂전단 시험의 모든 변형률 영역에서 변형률에 따른 등가반경비 곡선을 보다 효과적으로 나타내는데 적합하다. 감쇠비 산정시 수정 등가반경법을 쌍곡선 모델, 수정 쌍곡선 모델, 램버그오스굿 모델등에 적용시켜 보았다. 연구결과는 감쇠비 산정시 재래식 등가반경법에 의한 하나의 등가반경 수치를 사용하는 것은 적절치 않다는 것을 보여주었다. 이력감쇠뿐 아니라 미소변형률 영역에서의 흙의 감쇠 현상을 고려하기 위하여 새로운 모델이 개발되었고, 이러한 두 가지 복합감쇠에 상응하는 변형률 산정시 부가적 조정이 필요한지 검토해 보았다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.90-96
• /
• 2008

Engineered mixtures composed of rigid sand particles and soft rubber particles are tested to investigate their behavior with strain level. Mixtures are prepared with different volumetric sand fractions (sf) to identify response using small strain resonant column, intermediate strain oedometer, and large strain direct shear tests. The small strain shear modulus and damping ratio are determined with volumetric sand fractions. The asymmetric frequency response curve increases with decreasing sand fraction. Linear responses of shear strain and damping ratio with shear strain are observed at the mixture of sf=0.2. Vertical strain increases with decreasing sand fraction. Mixtures with $04.{\leq}sf{\leq}0.6$ show the transitional stress-deformation behavior from rubber-like to sand-like behavior. The friction angle increases with the sand fraction and no apparent peak strength is observed in mixture without sf=1.0.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 박판성형기술의 진보
• /
• pp.11-23
• /
• 1994

Formability of sheet metals can be evaluated using tensile testing. Easily measured tensile properties such as yield strength, tensile strength, elongation, strain hardening exponent, strain rate sensitivity and plastic strain ratio are important parameters to evaluated the sheet formability. This paper briefly explains how these properties are related to deep drawability and stretchability. The plastic anisotropy of sheet metals is usually attributed to the crystallographic texture. However dislocation distribution may influence the anisotropy.

• 한국결정학회지
• /
• 제12권1호
• /
• pp.14-19
• /
• 2001

Effects of electric-field-induced lattice distortion on the polarization and strain were investigated in Pb(Mg/sub 1/3/Nb/sub 2/3)O₃ relaxor ferroelectric ceramics in the temperature range of -50℃∼90℃. The ratio of residual strain and polarization (S/sub r//P/sub r/ rarely depends on the temperature. However, the ratio of the electric field included strain and polarization (S/sub induced//P/sub induced/) increased as the temperature decreases below phase transition temperature. To explain these experimental results, a simple rigid ion model concentrating on only Bo/sub 6/ octahedron was suggested.

• 한국농공학회지
• /
• 제30권4호
• /
• pp.134-153
• /
• 1988

This paper was carried out to investigate the existence of a unique stress- strain behavior by obtaining some factors influencing the time dependent stress- strain behavior of clay. The results obtained from this study were summarized as follows ; 1. The relationship between stress ratro and strain in normally consolidated clay was in- dependent on pre-shear consolidation pressure. Therefore, shear strain could be expressed as a function with stress ratio. 2. The constitutive equation of shear strain on Modified Carn Clay Model coincided better with the observed value than Cam Clay Model. 3. The relationships between deviator stress and shear strain, between pore water pressure and shear strain were unified by the mean equivalent pressure. 4. The shear strain contour in norrnally consolidated clay was increased linearly through origin, but that in overconsolidated clay was not in accordance with the result of the former. 5. Because the effective stress path of normally consolidated clay was unified by the mean equivalent pressure, state boundary surface in (e,p,q) space was transformed into two dimensional surface. But it was considered to be suitable that the unified stress- strain in overconsolidated clay be expressed by a function with overconsolidation ratio. 6. The deviator for constant strain was increased linearly with increment of strain rate ($\varepsilon$) on semi-log scale, but pore water pressure was decreased. 7. The behavior of stress relaxation was transformed from linear to curvilinear with inc - rement of strain rate before stress relaxation test, and pore water pressure was increased in total range. 8. The strain of creep was increased linearly with increment of time on semi-log scale. The greater the strain rate before creep test became, the greater the increment of strain of creep became. And the pore water pressure during creep test was increased generally with increment of time on semi-log scale.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.913-916
• /
• 2008

변형경화형 시멘트 복합체(SHCC)의 직접인장거동은 주로 물시멘트비, 섬유와 매트릭스 간의 상호작용, 부착강도, 섬유 혼입율 등에 의해 영향을 받는다. 본 논문은 PET 및 PVA섬유를 사용한 SHCC의 직접인장거동에서 섬유의 형상비의 영향을 평가하기 위해 PET섬유의 형상비(Aspect ratio, ${\ell}/d_f$ : 150, 300, 600)를 변수로 선정하였다. 동일한 배합조건에서 PET1.5+PVA0.5-300 및 PET1.5+PVA0.5-600시험체는 PET1.5+PVA0.5-150에 비해 우수한 유사변형경화특성과 미세균열분산 특성을 보였으며, PET1.5+PVA0.5-300 및 PET1.5+PVA0.5-600 시험체는 최대인장응력시 각각 0.5, 2.0%의 변형율을 나타내었다.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.222-225
• /
• 2002

Microwave dielectric properties of the layered and functionally graded materials (FGMs) of $Mg_{0.93}Ca_{0.07}TiO_3$ (MCT) and $(Ca_{0.3}Li_{0.14}Sm_{0.42})TiO_3$(CLST) were investigated as a function of the volume ratio of two components. Dielectric constant was decreased with an increase of the volume ratio of MCT which had a lower dielectric constant thant CLST. For the layered FGMs specimens, the difference of thermal expansion coefficients between two components induced thermal strain to dielectric layers, which was confirmed by the plot of ${\Delta}$k (X-ray diffraction peak width0 versus k (scattering vector) using the double-peak Lorentzian function, f(x). Quality factor of the specimens was affected by the thermal strain of dielectric layer, especially MCT layer. For the specimen with the volume ratio of MCT/CLST = 2, the qulaity factor of the specimen showed a minimum value due to the maximum thermal strain fo MCT layer.