• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.7
• /
• pp.303-308
• /
• 2001

This paper presents algorithm to plan construction and expanding of substation considering contingency accidents by proposing utilization factor according to configuration of substation bank system. In this paper, firstly, proper sphere of supply area by each district which could be standardized with respect to its supply capacity is established under assumption of long term load forecasting. Secondly, goal of utilization ratio based on configuration of substation bank was set to keep reliability by remaining sound bank when it happen to one bank accidents. Finally, it is set up for optimal construction and expanding of substation considering economy and reliability simultaneously about substation to exceed these ratio. To verify proposed algorithm, at first, after adopting a part of Kangnam area in Seoul as area for testing, it is divided into several regions for this area according to power branches of power utility. Secondly, by deriving correlation factor between load demand and economic indicators in these region respectively, the regional load forecasting was performed with economic growth and city plan scenario. Finally, based on the predicted load demand by region and land use data which is identified from air-photographic, the load demand by district was predicted. Also, planning for substation considering contingency is formulated to expand taking into account computing utilization factor which is based on configuration of substation bank respectively.

• Korean Journal of Environment and Ecology
• /
• v.28 no.5
• /
• pp.566-573
• /
• 2014

Decay rate and nutrient dynamics during leaf litter decomposition of deciduous broad leaf Quercus mongolica and evergreen needle leaf Pinus densiflora were investigated for 69 months from December 2005 to September 2011 in Mt. Worak National Park as a part of National Long-Term Ecological Research Program in Korea. Percent remaining weight of Q. mongolica and P. densiflora leaf litter after 69 months elapsed was $35.4{\pm}2.3%$ and $16.1{\pm}1.3%$, respectively. Decomposition of P. densiflora leaf litter was significantly faster than that of Q. mongolica leaf litter. Decay constant (k) of Q. mongolica and P. densiflora leaf litter after 69 months elapsed was 5.97 and 10.50, respectively. Initial C/N and C/P ratio of Q. mongolica leaf litter was 43.1 and 543.9 respectively. After 69 months elapsed, C/N and C/P ratio of decomposing Q. mongolica leaf litter decreased to 8.7 and 141.2, respectively. Initial C/N and C/P ratio of P. densiflora leaf litter was 151.2 and 391.4, respectively. After 69 months elapsed, C/N and C/P ratio of decomposing P. densiflora leaf litter decreased to 22.9. and 136.5. respectively. Initial concentration of N, P, K, Ca and Mg in leaf litter was 9.30, 0.23, 2.36, 3.14, 1.11 mg/g in Q. mongolica, and 3.02, 0.09, 1.00, 3.84, 0.62 mg/g in P. densiflora, respectively. Initial concentration of N and P in Q. mongolica leaf litter was significantly higher than those in P. densiflora. After 69 months elapsed, remaining N, P, K, Ca and Mg in decomposing leaf litter were 73.8, 60.9, 17.2, 20.3, 35.1 % in Q. mongolica, and 69.5, 75.3, 12.3, 10.9, 10.8 % in P. densiflora, respectively.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.665-672
• /
• 2005

We present a novel pilot-aided channel estimation method for OFDM (Orthogonal Frequency Division Muitiplexing) system using WT(Wavelet transform) and interpolation. Due to excellent AWGN (Additive White Gaussian Noise) cancellation capability of n, pilot channels are estimated quite exactly and then, Dey are used in 2-degree polynomial interpolating the other remaining data symbol channels. The simulation results for Short WATM (Wireless Asynchronous Transfer Mode) channel show that the degradation in BER (Bit Error Ratio) performance of OFDM system iか this estimator is negligible compared to the case of perfect knowledge of CSI (Channel State Information).

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.393-396
• /
• 2008

Propellant consumption control for space launch vehicle can be achieved by propellant utilization system (PUS) and tank depletion system (TDS). In the course of developing new space launch vehicles, the main target of design is on reducing of space launch vehicle weight, which results in increasing both specific impulse and payload weight. The weights of space launch vehicles are generally allocated to structure, propulsion system, and propellants loaded. The quantity of propellants filled in propellant tanks may be estimated with the propellants actually consumed by propulsion system to complete its mission and the propellants left on-board at the time of engine shut-off. To minimize the remaining quantity of propellants on-board the supplying propellants' O/F ratio should be controlled from the certain time before engine shutdown. To control an O/F ratio, a control system, which accurately measures and compares the remainder of propellants in tanks and pipes, should be needed. This paper solely dedicates its contents to explore the merits and demerits of various level sensor, which is one of the important elements for PUS and TDS, and the transmission and control of signals within space launch vehicle.

• The Journal of Korean Physical Therapy
• /
• v.27 no.6
• /
• pp.419-424
• /
• 2015

Purpose: This study aimed to evaluate the effects of lumbar stabilization exercise on the abdominal muscle-back muscle ratio in white-collar workers. Methods: Forty white-collar workers without any pain who worked at an information technology (IT) company located in the Gyeonggi province were included in this study. Of these, 20 subjects were randomly allocated to the lumbar stabilization exercise group, whereas the remaining 20 were randomly allocated to the control group. The lumbar stabilization exercise group performed a 40-minute-long exercise once a week for 8 weeks. The strength of the abdominal and back muscles was measured using the CENTAUR 3-D Spatial Rotation Device (BFMC, Germany). Data analysis was conducted using SPSS 18.0 for Windows. The Paired t-test was performed to compare the values measured before and after exercise within each group. The independent sample t-test was performed to analyze the differences between the 2 groups. The statistical significance for all the analyses was set at .05. Results: The strength of the abdominal muscles after the exercise significantly differed between the lumbar stabilization exercise group and the control group (p<0.05). However, the increase in the abdominal muscle-back muscle ratio was significant in only the lumbar stabilization exercise group (p<0.05), but not in the control group (p>0.05). Conclusion: The improvement of the abdominal muscle-back muscle ratio through lumbar stabilization exercise may have positive effects on lumbar stabilization. Moreover, lumbar stabilization exercise is considered beneficial for the prevention of back pain and musculoskeletal diseases.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.26-29
• /
• 2004

S-PVA is a new technology which enables screen quality advantages over S-IPS and MVA, including high transmittance, >1000:1 contrast ratio, sub-10ms response time, and wide angle of view with no off-axis image inversion and undetectable gamma distortion. This new technology will be described in detail. This paper also addresses the other remaining performance issues facing LCD-TV, including Samsung's plans for addressing these challenges. For example, until recently, inter-gray response time and associated motion blur were significant issues for achieving LCD-TV images quality. Samsung has invented DCC-II technology to achieve sub-10ms response time, and this achievement is described herein. Other technology advancements, including next-generation color performance and ultra-low black performance and improvement of off axis image quality are also discussed in this paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.223-224
• /
• 2000

As technology level of TFT-LCD advances, application to TV becomes an emerging important area for LCD makers. In this paper, we review current LCD technology level to be used in TV such as liquid crystal response behavior, color accuracy, contrast ratio, brightness and panel size. Based on the understanding of current limitations in LCD compared with CRT, the improvement plan to render 'near perfect motion picture' reproduction with LCD is proposed. Digital TV is a great opportunity for digital LCD panels, but we have to solve remaining technical and cost issue in order to be competitive with other large size TV technologies such as PDP, CRT or projection type. In preparing the upcoming digital TV era with advanced TFT-LCD, the hurdles and prospect of larger size LCD-TV panels will be discussed.

• Publications of The Korean Astronomical Society
• /
• v.11 no.1
• /
• pp.263-277
• /
• 1996

We have intensively carried out numerical calculations on flare predictions from the solar activity data for photospheric sunspots, chromospheric flare and plages, coronal X-ray intensities and 2800MHz radio fluxes, by using multilinear regression method. Intensities of solar flares for the next day have been predicted from the solar data between 1977-1982 and 1993-1996. Firstly, we have calculated flare predictions with the multilinear regression method, by using separate solar data in growth and decay phase of sunspot area and magnetic field strength from the whole data on solar activities. Secondly, the same operations as above have been made for the remaining data after removal of the data with large deviation from the mean calculated by the above prediction method. we have reached a conclusion that average hit ratio of correct predictions to total predictions of flares with class of M5 over has been as high as 70% for the first case and that of correct prediction number to total observation number has been shown as 61%.

• Steel and Composite Structures
• /
• v.29 no.1
• /
• pp.23-37
• /
• 2018

In this paper, seismic provisions related to built-up special concentrically braced frames (BSCBFs) are investigated under cyclic loading using non-linear finite element analysis of a single-bay single-story frame. These braces, which contain double angle and double channel brace sections, are considered in two types of single diagonal and X-braced frames. The results of this study show that current seismic provisions such as observing the 0.4 ratio for slenderness ratio of individual elements between stitch connectors are conservative in BSCBFs, and can be increased according to the type of braces. Furthermore, such increments will lead to decreasing or remaining the current middle protected zone requirements of each BSCBFs. Failure results of BSCBFs, which are related to the plastic equivalent strain growth of members and ductility capacity of the models, show that the behaviors of double channel back-to-back diagonal braces are more desirable than those of similar face-to-face ones. Also, for double angle diagonal braces, results show that the failure of back-to-back BSCBFs occurs faster in comparison with face-to-face similar braces. In X-braced frames, cyclic and failure behaviors of built-up face-to-face models are more desirable than similar back-to-back braces in general.

• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.177-186
• /
• 2019

In this study, we investigated for synthetic hydrotalcite in chloroprene rubber foam. Experiments were carried out to find the optimum content ratio by controlling the contents of MgO and Hydrotalcite. Swelling test in toluene immersion was made to measure the crosslinking density of CR foams, and the cure properties were investigated with flat die rheometer and Mooney viscosity. The difference of hardness, tensile strength and elongation at break were observed after immersing in 7% NaCl or 21% NaCl solutions for a day and four days. In addition, the volume change and water content remaining in CR foam were measured after immersing NaCl solution. As content of MgO increased, the value of the cure torque tended to increase, but it was almost constant above 2phr of MgO. However, the Mooney viscosity decreased with increasing MgO content. The crosslinking density, determined by the swelling ratio, showed that the CR compound without MgO showed a higher degree of swelling. When the content of hydrotalcite/MgO was 3:2, it was the lowest volume change of CR form. Also, As the content of hydrotalcite decreased, the difference of mechanical properties before and after immersion NaCl solution increased.