• 한국치위생학회지
• /
• 제21권5호
• /
• pp.629-637
• /
• 2021

Objectives: The purpose of this study was to investigate the degree of activity restriction and the number of remaining teeth of the elderly and to analyze the correlation. Methods: Statistical analysis of the collected data was analyzed using the SPSS window program 25.0 version (IBM) using a composite sample for the analysis of the 7th National Health and Nutrition Survey data, and a composite sample multiple logistic regression analysis was performed to confirm the effect of activity restrictions on the number of remaining teeth. Results: As a result of analyzing the effect of activity restriction on the number of remaining teeth, in the model that analyzed only activity restriction variables, the risk ratio of less than 20 remaining teeth was 1.61 times higher and the age-adjusted model, the risk ratio of less than 20 remaining teeth was 1.46 times higher (p<0.001). In the model that corrected all variables, the results were not statistically significant. Conclusions: In this study, the relationship between activity restriction and the number of remaining teeth could be confirmed, and in subsequent studies, more in-depth studies are considered to be needed using sub-variables that specifically reflect the reasons for activity restriction.

• 한국치위생학회지
• /
• 제16권1호
• /
• pp.19-25
• /
• 2016

Objectives: The purpose of the study is to investigate the relationship between the number of remaining teeth and depression in Korean adults. Methods: The subjects were the respondents of the Sixth Korea National Health and Nutrition Examination Survey(KNHANES). The questionnaire consisted of the general characteristics of the subjects, number of remaining teeth, and prevalence of depression. relationship of the prevalence of depression and the number of remaining teeth. The data were analyzed by chi-square test, t-test, and logistic regression using SPSS, and 95% confidence intervals were calculated. Results: There was a significant difference in number of remaining teeth and odds ratio(OR) was 1.940(95% confidence interval: 1.062-3.544). Statistically significant difference was not observed after adjusting for age and gender and OR was 1.515(95% confidence interval: 0.823-2.787). And Statistically significant difference was not observed after adjusting for age, gender and other variables. The OR was 1.399(95% confidence interval: 0.757-2.586). Conclusions: Depression in the adults was related to the number of remaining teeth. But there was no significant difference in the number of remaining teeth after adjusted for age, gender, and other factors.

• International journal of advanced smart convergence
• /
• 제9권2호
• /
• pp.185-194
• /
• 2020

Designing of a hierarchical clustering algorithm is one of the numerous approaches to minimize the energy consumption of the Wireless Sensor Networks (WSNs). In this paper, a homogeneous and randomly deployed sensor nodes is considered. These sensors are energy constrained elements. The nominal selection of the Cluster Head (CH) which falls under the clustering part of the network protocol is studied and compared to Low Energy Adaptive Clustering Hierarchy (LEACH) protocol. CHs in this proposed process is the function of total remaining energy of each node as well as total average energy of the whole arrangement. The algorithm considers initial energy, optimum value of cluster heads to elect the next group of cluster heads for the network as well as residual energy. Total remaining energy of each node is compared to total average energy of the system and if the result is positive, these nodes are eligible to become CH in the very next round. Analysis and numerical simulations quantify the efficiency and Average Energy Ratio (AER) of the proposed system.

• 수산해양기술연구
• /
• 제37권3호
• /
• pp.223-231
• /
• 2001

제주도 연안 정치망의 어획성능을 향상시키기 위한 어구구조개량과 조업방식의 생력화에 대한 기초자료를 제공할 목적으로 현재 제주도 연안 정치망 어장에 부설하여 조업을 행하고 있는 각망어구와 낙망어구의 어획성능을 비교하기 위해서 이들 실물어구를 1/30로 축소하고 제작한 모형어구를 이용하여 수조실험을 실시하고 고등어어군, 전갱이 어군, 독가시치 어군의 입·출망 행동을 관찰하고 해석하였는데, 그 결과는 다음과 같다. 1. 어군의 입망율은 경과시간 60초일 때 각망어구에서는 고등어 50%, 전갱이 18%, 독가시치 28%였고, 낙망 어구에서는 고등어 70%, 전갱이 60%, 독가시치 30%였다. 2. 어군의 출망율은 경과시간 60초일 때 각망어구에서는 고등어 70%, 전갱이 40%, 독가시치 24%였고, 낙망어구에서는 고등어, 전갱이가 각각 0%, 독가시치가 3%였다. 3. 어군의 잔존율은 경과시간 60초일 때 각망어구 에서는 고등어 30%, 전갱이 60%, 독가시치 76%였고, 낙망어구에서는 고등어, 전갱이가 각각 100%, 독가시치가 97%였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권5호
• /
• pp.3045-3050
• /
• 2013

Purpose: Hepatic resection is arguably the preferred treatment for huge hepatocellular carcinoma (H-HCC). Estimating the remnant liver volume is therefore essential. This study aimed to evaluate the feasibility of using computer-assisted volumetric analysis for this purpose. Methods: The study involved 40 patients with H-HCC. Laboratory examinations were conducted, and a contrast CT-scan revealed that 30 cases out of the participating 40 had single-lesion tumors. The remaining 10 had less than three satellite tumors. With the consensus of the team, two physicians conducted computer-assisted 3D segmentation of the liver, tumor, and vessels in each case. Volume was automatically computed from each segmented/labeled anatomical field. To estimate the resection volume, virtual lobectomy was applied to the main tumor. A margin greater than 1 cm was applied to the satellite tumors. Resectability was predicted by computing a ratio of functional liver resection (R) as (Vresected-Vtumor)/(Vtotal-Vtumor) x 100%, applying a threshold of 50% and 60% for cirrhotic and non-cirrhotic cases, respectively. This estimation was then compared with surgical findings. Results: Out of the 22 patients who had undergone hepatectomies, only one had an R that exceeded the threshold. Among the remaining 18 patients with non-resectable H-HCC, 12 had Rs that exceeded the specified ratio and the remaining 6 had Rs that were < 50%. Four of the patients who had Rs less than 50% underwent incomplete surgery due to operative findings of more extensive satellite tumors, vascular invasion, or metastasis. The other two cases did not undergo surgery because of the high risk involved in removing the tumor. Overall, the ratio of functional liver resection for estimating resectability correlated well with the other surgical findings. Conclusion: Efficient pre-operative resectability assessment of H-HCC using computer-assisted volumetric analysis is feasible.

• Structural Engineering and Mechanics
• /
• 제36권1호
• /
• pp.1-18
• /
• 2010

A total of 28 wall panels were cast and tested under uniformly distributed axial load in one-way in-plane action to study the effect of slenderness ratio (SR) and aspect ratio (AR) on the ultimate load. Two concrete formulations, normal concrete (NC) and self compacting concrete (SCC), were used for the casting of wall panels. Out of 28 wall panels, 12 were made of NC and the remaining 16 panels were of SCC. All the 12 NC panels and 12 out of 16 SCC panels were used to study the influence of SR and the remaining 4 SCC panels were tested to study the effect of AR on the ultimate load. A brief review of studies available in literature on the strength and behaviour of reinforced concrete (RC) wall panels is presented. Load-deformation response was recorded and analyzed. The ultimate load of SCC wall panels decreases non-linearly with the increase in SR and decreases linearly with increasing values of AR. Based on this study a method is proposed to predict the ultimate load of reinforced SCC wall panels. The modified method includes the effect of SR, AR and concrete strength.

• 전자공학회논문지C
• /
• 제34C권3호
• /
• pp.23-36
• /
• 1997

In tis paper, sthe new data model for the hardware implementation of lempel-ziv compression algorithm was proposed. Traditional model generates the codeword which consists of 3 bytes, the last symbol, the position and the matched length. MSB (most significant bit) of the last symbol is the comparession flag and the remaining seven bits represent the character. We confined the value of the matched length to 128 instead of 256, which can be coded with seven bits only. In the proposed model, the codeword consists of 2 bytes, the merged symbol and the position. MSB of the merged symbol is the comression flag. The remaining seven bits represent the character or the matched length according to the value of the compression flag. The proposed model reduces the compression ratio by 5% compared with the traditional model. The proposed model can be adopted to the existing hardware architectures. The incremental factors of the compression ratio are also analyzed in this paper.

• 대한산업공학회지
• /
• 제43권3호
• /
• pp.176-183
• /
• 2017

In recent years, studies about multitasking becomes more important. During multitasking, operators can feel frustration when they are interrupted during the task and frustration can affect operator's emotional state and performance. However there is no research on measuring the frustration quantitatively in multitasking environment. In this paper, we suggested quantitative measurement of frustration during multitasking. In order to measure the frustration, we made a mathematical representation with emotional decay model and the initial intensity of frustration based on cognitive closure theory. The amount of initial intensity could be represented as the ratio of actual remaining time to expected remaining time. By the experiment, we measured the frustration during the experiment and compared this values with values of frustration dimension of NASA-TLX. Finally we got the linear regression model with a good accuracy ($R^2=0.986$). This study contributes to measuring the emotion quantitatively by the relation of expected and actual remaining time in multitasking environment.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2949-2957
• /
• 2020

Fatigue crack growth model has been developed for dissimilar metal weld joints of a piping component under cyclic loading, where in the crack is located at the center of the weld in the circumferential direction. The fracture parameter, Stress Intensity Factor (SIF) has been computed by using principle of superposition as K_H + K_M. K_H is evaluated by assuming that, the complete specimen is made of the material containing the notch location. In second stage, the stress field ahead of the crack tip, accounting for the strength mismatch, the applied load and geometry has been characterized to evaluate SIF (K_M). For each incremental crack depth, stress field ahead of the crack tip has been quantified by using J-integral (elastic), mismatch ratio, plastic interaction factor and stress parallel to the crack surface. The associated constants for evaluation of K_M have been computed by using the quantified stress field with respect to the distance from the crack tip. Net SIF (K_H + K_M) computed, has been used for the crack growth analysis and remaining life prediction by Paris crack growth model. To validate the model, SIF and remaining life has been predicted for a pipe made up of (i) SA312 Type 304LN austenitic stainless steel and SA508 Gr. 3 Cl. 1. Low alloy carbon steel (ii) welded SA312 Type 304LN austenitic stainless-steel pipe. From the studies, it is observed that the model could predict the remaining life of DMWJ piping components with a maximum difference of 15% compared to experimental observations.

• 디지털융복합연구
• /
• 제14권2호
• /
• pp.279-286
• /
• 2016

최근 노인 인구의 증가로 노인들의 삶의 질과 관련하여 구강건강에 관한 관심도 크게 증가하고 있다. 본 연구의 목적은 치매, 치매의심, 정상인 세 그룹으로 나누어 여성 노인들의 잔존 치아 수와의 관련성에 대해서 조사하였다. 일부 지역사회에 거주하는 경로당을 방문한 60세 이상 여성 노인 177명의 구강 상태와 그들의 MMSE 점수로 인지기능을 평가하였다. 모든 자료는 SPSS를 이용하여 chi-square test, t-test, ANOVA, multiful logistic regression 통계기법을 이용하여 분석하였다. Multiful logistic regression으로 MMSE 점수에 따른 치매와 잔존 치아 수와의 관련성을 분석하였고, 95% 신뢰구간으로 정하였다. 치매가 있는 대상자가 잔존 치아수가 0-10개로 적을 위험비가 3.53배(95% confidence interval: 1.382-8.997) 높은 것으로 나타났다. 본 연구에서는 여성 노인들에서 MMSE 점수에 따른 치매와 잔존 치아 수 사이에 유의한 차이가 있는 것으로 조사되었다.