• Earthquakes and Structures
• /
• 제26권2호
• /
• pp.97-115
• /
• 2024

In this paper, a database consisting of the dynamic shear modulus ratio and damping ratio test data of clay obtained from 406 groups of triaxial tests is constructed with the starting area of Xiong'an New Area as the research background. The aim is to study the nonlinear dynamic properties of clay in this area under cyclic loading. The study found that the effective confining pressure and plasticity index have certain influences on the dynamic shear modulus ratio and damping ratio of clay in this area. Through data analysis, it was found that there was a certain correlation between effective confining pressure and plasticity index and dynamic shear modulus ratio and damping ratio, with fitting degree values greater than 0.1263 for both. However, other physical indices such as the void ratio, natural density, water content and specific gravity have only a small effect on the dynamic shear modulus ratio and the damping ratio, with fitting degree values of less than 0.1 for all of them. This indicates that it is important to consider the influence of effective confining pressure and plasticity index when studying the nonlinear dynamic properties of clays in this area. Based on the above, prediction models for the dynamic shear modulus ratio and damping ratio in this area were constructed separately. The results showed that the model that considered the combined effect of effective confining pressure and plasticity index performed best. The predicted dynamic shear modulus ratio and damping ratio closely matched the actual curves, with approximately 88% of the data falling within ±1.3 times the measured dynamic shear modulus ratio and approximately 85.1% of the data falling within ±1.3 times the measured damping ratio. In contrast, the prediction models that considered only a single influence deviated from the actual values, particularly the model that considered only the plasticity index, which predicted the dynamic shear modulus ratio and the damping ratio within a small distribution range close to the average of the test values. When compared with existing prediction models, it was found that the predicted dynamic shear modulus ratio in this paper was slightly higher, which was due to the overall hardness of the clay in this area, leading to a slightly higher determination of the dynamic shear modulus ratio by the prediction model. Finally, for the dynamic shear modulus ratio and damping ratio of the engineering site in the starting area of Xiong'an New Area, we confirm that the prediction formulas established in this paper have high reliability and provide the applicable range of the prediction model.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.1171-1177
• /
• 2007

We consider estimation of the right-tail probability in a log-Laplace random variable, As we derive the density of ratio of two independent log-Laplace random variables, the k-th moment of the ratio is represented by a special mathematical function. and hence variance of the ratio can be represented by a psi-function.

• 한국물환경학회지
• /
• 제25권3호
• /
• pp.375-385
• /
• 2009

The estimation of delivery ratio is a essential part of Korean Total Maximum Daily Loads (TMDL) procedure which needs a number of observed stream flow and pollutants data. If observed data were not sufficient, researchers have to find other alternatives. One of them is to make indirect data by using watershed models, such as Soil and Water Assessment Tool (SWAT) and Hydrological Simulation Program - FORTRAN (HSPF) and so on. In this study, indirect daily data was made by using SWAT model. To build the Byongseong-SWAT model accurately, crop cultures are reflected by handling the MGT.file in SWAT model. Especially, mass of manure and schedule of crop culture are inputted through investigating domestic research papers as well as fieldwork. After calibrating SWAT model in comparison with the 22-years flow and pollutants observed outlet data, the delivery ratio of Byongseong watershed is calculated by using daily simulated data during 2004-2007. Empirical equations for delivery ratio through multi-regression analysis are developed by using meteorological and physical factors such as flow, watershed area, stream length, catchment slope, curve number (CN) and subbasin's pollutant discharge loads.

• Journal of the Korean Data and Information Science Society
• /
• 제12권2호
• /
• pp.125-143
• /
• 2001

We, in this paper, propose a kernel estimator of hazard ratio with censored survival data. The uniform consistency and asymptotic normality of the proposed estimator are proved by using counting process approach. In order to assess the performance of the proposed estimator, we compare the kernel estimator with Cox estimator and the generalized rank estimators of hazard ratio in terms of MSE by Monte Carlo simulation. Two examples are illustrated for our results.

• 대기
• /
• 제26권3호
• /
• pp.461-471
• /
• 2016

A quality check algorithm for the Weather Information Service Engine pulsed Doppler wind lidar is developed from a view point of spatial and temporal consistencies of observed wind speed. Threshold values for quality check are determined by statistical analysis on the standard deviation of 3-component of wind speed obtained by a wind lidar, and the vertical gradient of horizontal wind speed obtained by a radiosonde system. The algorithm includes carrier-to-noise ratio (CNR) check, data availability check, and vertical gradient of horizontal wind speed check. That is, data sets whose CNR is less than -29 dB, data availability is less than 90%, or vertical gradient of horizontal wind speed is less than $-0.028s^{-1}$ or larger than $0.032s^{-1}$ are classified as 'doubtful', and flagged. The developed quality check algorithm is applied to data obtained at Bucheon station for the period from 1 to 30 September 2015. It is found that the number of 'doubtful' data shows maxima around 2000 m high, but the ratio of 'doubtful' to height-total data increases with increasing height due to atmospheric boundary height, cloud, or rainfall, etc. It is also found that the quality check by data availability is more effective than those by carrier to noise ratio or vertical gradient of horizontal wind speed to remove an erroneous noise data.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.201-204
• /
• 2011

For efficient noise reduction in a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrum, a new algorithm was proposed. The suggested algorithm reduces white and electrical noise, and it improves signal-to-noise ratio. This algorithm has been optimized to reduce the noise more efficiently using the traces of signal level. The algorithm has been efficiently combined with derivative window to improve the resolution as well S/N. Time domain data was corrected for DC voltage interference. $t^n$ window was applied in time domain data to improved the resolution. However, $t^n$ window can improve the signal resolution, it will also increase the noise level in frequency domain. Therefore, newly developed noise reduction algorithm will be applied to make a balance between resolving power and S/N ratio for magnitude mode. The trace algorithm can determine the current data point with several data points (mean, past data, calculated past data). In the current calculations, we assumed data points with S/N ratio more than 3 were considered as signal data points. After the windowing and noise reduction, both resolution and signal-to-noise ratio were improved. This algorithm is applicable more efficiently to frequency dependent noise and large size data.

• Journal of the Korean Data and Information Science Society
• /
• 제11권1호
• /
• pp.31-35
• /
• 2000

We shall give upper and lower bounds of the odds ratio of an event by a slight condition of the conditional probability of events.

• 한국농공학회논문집
• /
• 제48권4호
• /
• pp.59-66
• /
• 2006

In this study, construction modulus, void ratio and settlement characteristics of 38 CFRD in domestic and foreign countries were investigated from monitoring data. The effect of field dry density and void ratio to dam body was analyzed. The standard void ratio of CFRD that can be easily used by dam designers and field engineers was proposed from the monitoring data. It was confirmed that we can get the degree of compaction needed for reasonable compaction of dam body by calculating the field dry density from inverse operation of the standard void ratio. It was thought that the void ratio of CFRD depends on shape coefficient and in case of a high shape coefficient, the void ratio was high with its void ratio 0.17 -0.38.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1035-1041
• /
• 2012

본 연구는 기업규모, 장부가치/시장가치 비율, 순이익/주가 비율, 현금흐름/주가 비율, 레버리지 등 기본적 변수를 사용하여 주식수익률에 유의적인 변수를 확인하고자 하였다. 이를 위해 본 연구에서는 횡단면 자료와 시계열 자료를 결합한 패널자료(panel data)를 이용하여 패널자료분석방법으로 연구모형을 실증적으로 분석하였다. 일반적으로 패널자료를 사용하면 Hsiao[13]가 지적한 바와 같이 표본의 크기를 확대시켜 자유도를 증가시키고 이론적으로 설명변수간 다중공선성(muti-collinearity) 문제를 완화할 수 있다. 실증분석결과에 의하면 기업규모(SIZ), 장부가치/시장가치 비율(B/M), 순이익/주가 비율(E/P), 현금흐름/주가 비율(C/P) 등이 주식수익률의 횡단면적 차이를 설명할 수 있는 유의적인 변수라 할 수 있다.

• Genomics & Informatics
• /
• 제7권3호
• /
• pp.148-151
• /
• 2009

Generally, larger sample size leads to a greater statistical power to detect a significant difference. We may increase the sample size for both case and control in order to obtain greater power. However, it is often the case that increasing sample size for case is not feasible for a variety of reasons. In order to look at change in power as the ratio of control to case varies (1:1 to 4:1), we conduct association tests with simulated data generated by PLINK. The simulated data consist of 50 disease SNPs and 300 non-disease SNPs and we compute powers for disease SNPs. Genetic Power Calculator was used for computing powers with varying the ratio of control to case (1:1, 2:1, 3:1, 4:1). In this study, we show that gains in statistical power resulting from increasing the ratio of control to case are substantial for the simulated data. Similar results might be expected for real data.