• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.43-45
• /
• 2003

소프트웨어 공학이 소프트웨어 시스템에 관한 방법론, 기술 및 툴 등의 유지보수와 개발에 중점을 두어 왔는데 최근에는 프로세스 개선과 프로세스 능력수준의 향상에 초점을 두는 방향으로 발전하면서 CMM 및 SPICE 활동이 증가하고 있다. 이와 같은 심사기법은 대규모의 회사에서 주로 시행되고 있어서 중소규모의 조직을 위한 간략한 심사기법의 도입이 요구되는 있는 상황이다. 본 논문에서 제시하는 심사기법은 CMM 심사를 위한 KPA 설문서의 rating 방법을 응용한 것으로서 SPICE 심사를 받은 국내 기업 중 일부 회사를 대상으로 하였다. 이 방법론에 대한 신뢰성의 평가는 아직 미흡한 상황이다. 이를 위해서 통계학적 접근방법을 도입하였는데 사용된 통계 기법은 상환계수를 통한 가설검정이다. 그 결과 성숙도 설문서(MQ) 선정모델의 적합성을 통계적 기법을 통해서 검증하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.1070-1075
• /
• 1994

This paper describes the method for designing loudness ratings as transmission quality for ISDN telephone connected to fully digital network. To design the desirable loudness ratings for ISDN telephone, the model system of digital speech communication for subjective test is developed and opinion tests for establishing the optimal CODEC input level, the range of overall loudness rating, and sidetone masking rating are performed. As the results, the desirable ranges of loudness ratings are proposed as 6 to 8dB for sending, 0 to 2dB for receiving, and 10 to 14dB for sidetone masking rating.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.3
• /
• pp.280-285
• /
• 2005

This paper proposes a novel method for determining the kind and rating of power quality solutions. To determine the kind of solution, event cause and direction are utilized. According to the event cause and direction, an adequate type of solution is determined for effective compensation. To rate the required capacity of solution, the concept of lost energy is adopted. Lost voltage, lost power and lost energy are calculated and the rating of the solution is determined to compensate a specific event. The rating method that utilizes the result of stochastic diagnosis is also proposed. A power quality index such as CP95 is adopted for solution suggestion. The method developed in this paper is applied to the test system and proved to be useful for enhancing the power quality of the customer system. It can provide customers with information pertaining to what is a proper and cost-effective solution among various compensating devices.

• Tribology and Lubricants
• /
• v.13 no.2
• /
• pp.8-15
• /
• 1997

It is very difficult to express the state of a tested engine objectively concerning the malfunction, failure and wear of an engine. The general method of engine evaluation is to express evaluator's opinion for the engine state after testing. However, these methods is only subjective evaluation because test engineers, designers, and evaluators does not easily coincide in opinion. Therefore, in this article, the method of engine rating are introduced in order to represent the qualitative trends into quantitative value. The purpose of Engine Rating is to assign a quantified value to the tribology state of a tested engines. Originally, this Engine Rating method have been used to evaluate the performance of engine oil quantitavely. Using this method, we can predict the proper interval of engine oil change due to its objectivity. So, we can prevent the frequent change of engine oil and protect the environmental contamination. Furthermore, this method can be used to tell the general state of a tested engine after finishing engine durability tests. A single merit scale is used to evaluate numerically the state of cleanliness and the mechanical condition. Generally, a part which is absolutely clean or shows no wear, is rated merit 10. A part which is absolutely dirty or very worn, is rated merit 0.

• KIEAE Journal
• /
• v.14 no.2
• /
• pp.77-86
• /
• 2014

Plenty of efforts have been made in the traditional architecture of Korea, Hanok, to develop various elements such as restoration, the introduction of new design, and energy-saving while systemic setups on standard and evaluation of eco-friendly energy design of Hanok are lacking. If we evaluate energy performance based on current standards without reflecting unique features of Hanok on the system, Hanok will be included in the very low grade among the residential buildings being included in the approval system of eco-friendly architecture or the unique features will be modified and the burden of increased construction cost. Therefore, this study is to prepare the basic reference for the introductory evaluation system by evaluating the energy performance level of NEO-Hanok based on the current building energy rating system. The result for NEO-Hanok based on the building energy rating system, we propose the rating standard with scorecard elements of NEO-Hanok by considering the necessity of identity and standard for NEO-Hanok. As a result of infiltration test to check the tightness, it was measured as 10.81 times/h (50 ACH). As we switch from the main insulation for the wall from the glass wool 64k(0.035W/mk) to rigid polyurethane foam first class first unit (0.024W/mk), the result was slightly increased from the first demand quantity rating yield $249.8kWh/m^2{\cdot}yr$ to $235.0kWh/m^2{\cdot}yr$. Current certificate system is focused more on the heating load than the cooling load, it is disadvantageous for Hanok, which has less cooling energy consumption in summer. The rating result from the target building study is level 4.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.5 no.1
• /
• pp.59-74
• /
• 1999

66 patients with low back pain were evaluated to determine if any differences of weight bearing were existed between the same side leg that feel pain(pain side leg) and that without pain (non-pain side leg) of lower extremities while weight bearing. 66 patients were divided into 3 groups according to pain pattern such as low back pain only(26), radiating pain only(21) and low back pain with radiating pain (19). Control group were 28 normal persons. The weight bearing was rated by Limloader(Model LLD-2000, Ver 1.2) and analyzed by paired and independent t-test, one-way ANOVA, Dunan's analaysis and Pearson's correlation analysis. The results of this study were as follows : 1. In patient group, significant difference of weight bearing rating between pain side leg and non-pain side leg was found. There was borne significantly less weight bearing rating(14.68%) on the pain side leg(P<.001). 2. In normal group, there was no significant difference between left and right leg(P>.05). But there was significant difference(3.21%) in absolute difference of both leg(p<.001). 3. The difference of 1 and 2 was 11.47% : more difference of weight bearing rating between both legs in patient group than that of the control group(p<.001). 4. There were significant differences of weight bearing rating in those 3 groups : low back pain group(10.30%), radiating pain group (17.90%) and low back pain with radiating pain group (17.10%) (p<.001). 5. There was significant correlation between pain intensity and difference of weight bearing rating(p<.05). The severer pain intensity. the more difference of weight bearing rating was found. 6. There was no significant correlation between the age, height and duration of symptom, etc(p>.05).

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.4
• /
• pp.235-239
• /
• 2005

An accurate fire danger rating model can contribute to effective forest fire prevention activities. This study evaluates the national forest fire danger rating index based on forest fire statistics data from 1999 to 2002. The number of fires was related to the forest fire danger rating index $(R^2=0.67)$, and no correlation was found with burned areas. A one-way ANOVA test between forest fire danger rating levels and forest fire statistics data indicated that a difference in the number of fires was found among 'danger', 'precaution' and 'none' levels, but 'precaution' and 'none' levels could not be delineated. In the case of a burned area, no difference was found among the three levels.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.4
• /
• pp.441-451
• /
• 2015

Objective : The purpose of the study was to investigate and compare the differences between Parkinson's disease rating, balance, fall and gait scales. Results : Parkinson's disease rating scales include the Hoehn-Yahr Scale and the Unified Parkinson's Disease Rating Scale (UPDRS). The Hoehn-Yahr Scale can measure disease rates easily; however it is not sensitive enough to evaluate the disease's process and management. UPDRS's advantage is in it's higher inter-reliability score; however it is more complicated to use. Parkinson's balance scales are comprised of the Berg Balance Scale (BBS) and the Activities-Specific Balance Confidence Scale (ABC). BBS has the advantage in that it is cheaper to measure and simple in use. ABC's advantage is especially in it's ability to measure higher functional levels; however it is more difficult measure responses due to scores appearing in both extremes. The Fall Efficacy Scale (FES) and The Survey of Activities and Fear of Falling in the Elderly (SAFE) are Parkinson's fall scales. FES's leverage over SAFE is that it is simpler to measure; however it does not coincide with responses which proves disadvantageous in measuring balance loss in high-level Parkinson's patients. SAFE's advantage is in it's simpler use and ability to be utilized without encountering the fear of fall; however it's at a disadvantage in regards to its use with multilateral aspects providing insufficient inspection. Lastly, the Dynamic Gait Index (DGI) and the Functional Gait Assessment (FGA) are Parkinson's gait scales. DGI is advantageous in its ability to test gait ability when exposed to a variety of external environments; however it is disadvantageous in that it registers higher scores with activities. FGA's advantage is in it's dynamic balance test; however it at a disadvantage with those unable to walk. Conclusion : A researcher of Parkinson's patients must choose each scale while considering their positive and negative characteristics.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.150-157
• /
• 2008

The purpose of this study was to investigate the effect of short-tenn stretching type of muscular strength gymnastics on health-related fitness and rating of perceived pain for automotive industry workers. The subjects selected were 27, who were divided into 3 groups(A group=10, B group=9, C group=8). Group A performed a short-term stretching Type of Muscular Strength Gymnastics only one time. Group B continuously performed the exercise program two times. Group C was a control group. The exercise program was a stretching Type of Muscular Strength Gymnastics, which was performed 3 times per week for 4 weeks. Its intensity was RPE 11-15. Data analysis was conducted by using SPSS ver 14.0. The test was conducted with two-way repeated ANOVA, post-hoc Ducan and paired t-test (a<.05). This study showed the following results. Muscular strength, muscular endurance and flexibility increased in all intra and between groups. Ratio of %fat decreased for group B but the control group presented conversely. Rating of perceived pain of group A decreased at arm and hands. Rating of perceived pain of group A decreased at back and leg.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.7
• /
• pp.414-420
• /
• 2003

The domestic needs for larger capability of power sources are increasing to cope with the expanding power load which results from the industrial developments & the progressed life style. In summer, the peak load is mainly due to the non-industrial reasons such as air-conditioners and other cooling equipments. To cover the concentrated peak load in stable, the power transmission lines should be more constructed and efficiently operated. The ampacity design of the underground cable system is generally following international standards such as IEC287, IEC60853 and JCS168 which regards the shape of 100% daily full power loads. It is not so efficient to neglect the real shapes of load curves generally below 60~70% of full load. The dynamic (real time) rating system tends to be used with the measured thermal parameters which make it possible to calculate the maximum ampacity within required periods. In this paper, the CTM(Conductor Temperature Monitoring) which is the base of dynamic rating systems for tunnel environment is proposed by a design of lumped thermal network ($\pi$-type thermal model) and distribution temperature sensor attached configuration, including the estimation results of its performances by load cycle test on 345kV single phase XLPE cable.