• The Journal of the Acoustical Society of Korea
• /
• v.9 no.4
• /
• pp.66-76
• /
• 1990

In this work, the effect of noise and distortion of a telephone channel on the speech recognition is studied, and methods to improve the recognition rate are proposed. Computer simulation is done using the 100-word test data whichwere made by pronouncing ten times 100-phonetically balanced Korean isolated words in a speaker dependent mode. First, a spectral subtraction method is suggested to improve the noisy speech recognition. Then, the effect of bandwidth limiting and channel distortion is studied. It has been found that bandwidth limiting and amplitude distortion lower the recognition rate significantly, but phase distortion affects little. To reduce the channel effect, we modify the reference pattern according to some training data. When both channel noise and distortion exist, the recognition rate without the proposed method is merely 7.7~26.4%, but the recognition rate with the proposed method is drastically increased to 76.2~92.3%.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.4
• /
• pp.131-136
• /
• 2011

A kinetic study has been made for the growth of nanocrystalline diamond (NCD) particles to a continuous thin film on silicon substrate in a microwave plasma chemical vapor deposition reactor. Parameters of deposition have been microwave power of 1.2 kW, the chamber pressure of 110 Torr, and the Ar/$CH_4$ ratio of 200/2 sccm. The deposition has been carried out at temperatures in the range of $400\sim700^{\circ}C$ for the times of 0.5~16 h. It has been revealed that a continuous diamond film evolves from the growth and coalescence of diamond crystallites (or particles), which have been heterogeneously nucleated at the previously scratched sites. The diamond particles grow following an $h^2$ = k't relationship, where h is the height of particles, k' is the particle growth rate constant, and t is the deposition time. The k' values at the different deposition temperatures satisfy an Arrhenius equation with the apparent activation energy of 4.37 kcal/mol or 0.19 eV/ atom. The rate limiting step should be the diffusion of carbon species over the Si substrate surface. The growth of diamond film thickness (H) shows an H = kt relationship with deposition time, t. The film growth rate constant, k, values at the different deposition temperatures show another Arrhenius-type expression with the apparent activation energy of 3.89 kcal/mol or 0.17 eV/atom. In this case, the rate limiting step might be the incorporation reaction of carbon species from the plasma on the film surface.

• Journal of Korean Society on Water Environment
• /
• v.24 no.5
• /
• pp.550-555
• /
• 2008

This study was conducted to assess the growth characteristics of phytoplankton and to understand seasonal dynamics of phytoplankton in response to limiting nutrients in an agricultural reservoir from November 2002 to December 2003. Marked increase of chl.a concentration observed in July ($99.0{\mu}g/L$) and November ($109.7{\mu}g/L$) after heavy rainfall. TP concentration ranged $48.0{\sim}126.6{\mu}g/L$, and its the temporal variation was similar to that of chl.a concentration. Microcystis spp., dominant phytoplankton species were used for the growth kinetics experiment, except for the season when Aulacoseira spp. (March, April) and Aphanocapsa sp. (May) dominated. In the temperature range between $10{\sim}25^{\circ}C$, the rate of growth increase per $10^{\circ}C$ was almost two folds. The highest maximum growth rate (${\mu}_{max}=1.09day^{-1}$) of phytoplankton observed September, and ${\mu}_{max}$ was lowest ($0.34day^{-1}$) in March when Aulacoseira spp. dominated. The ${\mu}_{max}$ ($0.78{\pm}0.20day^{-1}$) was relatively high in the summer season when water temperature is above $20^{\circ}C$ and cyanobacteria dominated compared to the spring when diatoms dominated ($0.43{\pm}0.08day^{-1}$). The maximum growth rate ($0.55{\pm}0.12day^{-1}$) and the half saturation concentration ($K_s=0.73{\pm}0.15{\mu}M$) of cyanobacteria during winter season (November, December) was higher than those of diatoms. However, the ${\mu}_{max}$ and $K_s$ of cyanobacteria in December was similar to those of diatom, reflecting that diatom cell quota (Mean 48.4 pgP/cell) was greater than cyanobacteria (34.0 pgP/cell) during this time.

• Proceedings of the Korean Statistical Society Conference
• /
• 2002.05a
• /
• pp.61-66
• /
• 2002

We consider a generalized N-policy for an M/M/1 queueing system. The idle server starts to work with ordinary service rate when a customer arrives. If the number of customers in the system reaches N, the service rate gets faster and continues until the system becomes empty. Otherwise, the server finishes the busy period with ordinary service rate. We obtain the limiting distribution of the number of customers in the system. After assigning various operating costs to the system, we show that there exists a unique fast service rate minimizing the long-run average cost per unit time.

• Journal of the Korean housing association
• /
• v.17 no.2
• /
• pp.11-18
• /
• 2006

For the more comfortable thermal environment in residential buildings, it was necessary for variable components like as automatic flow limiting valves and/or balancing valves in hydronic system. And, these components had an effect on flow-rate and pressure inside pipe. In this case, the incompatibility between the design for the heating system and the selection of equipment was the causes of several problems in heating pipe network. In this study, we peformed measurements and analyses of flow rate and pressure inside pipe for radiant floor heating in residential buildings through field surveys and experiments in order to find out the actual conditions and problems. On the basis of this, we suggested the approach for the optimal flow-rate and pressure maintaining inside pipe in individual heating system.

• Journal of Pharmaceutical Investigation
• /
• v.11 no.3
• /
• pp.14-20
• /
• 1981

One of the major objectives in the developments of a progesterone I.U.D. is to prepare devices which release drug at a constant rate for extended periods. A constant release rate is achived by maintaining drug concentration at a constant valve via the introduction of rate limiting membrane to solute diffusion at the surface of the devices. In this study, progesterone dispersed at monolithic device were prepared from polyhydroxy ethyl methacrylate. Constant release rate were obtained with device which were soaked in on ethanol-hexan solution. The release rate was dependant upon the concentration of the ethanolic solution in the soaking solution. This devices offer significant potential for futher development of hydrogel in the intrauterine contraception device for controlled release of progesterone.

• Applied Science and Convergence Technology
• /
• v.24 no.4
• /
• pp.96-101
• /
• 2015

Quantitative evaluation of photocatalytic activity of oxide nanoparticles in aqueous solution is quite challenging in that the kinetic reaction rate is determined by a complicated interplay among various limiting factors such as light scattering and absorption, diffusion and adsorption of reactants in condensed liquid phase, photoexcited charge separation and recombination rate, and the exact nature of active sites determined by detailed morphology and crystallinity of nanocrystals. Here, we present our simple experimental results showing that the kinetic regime of a typical photocatalytic degradation experiment over UV-irradiated $TiO_2$ nanoparticles in aqueous solution is in that dominated by the photoactivity of $TiO_2$ and its concentration. This result lays a firm ground of using the measured kinetic reaction rate in evaluating photocatalytic efficiency of oxide nanocrystals under evaluation.

• Transactions of Materials Processing
• /
• v.7 no.3
• /
• pp.225-232
• /
• 1998

This article is aimed primarily at establishing a process planning method for complex circular shells. For the deep drawing of complex shaped shell, the optimum process design is required to reduce the trial cost improve the quality, increase the productivity and shorten the delivery. The present approach which is related to the optimum process planning is based on the empirical knowledge through trial and error in the industrial field. In order to check the validity and the effectiveness of proposed work a sample process design has been applied to the multi-stepped deep drawing of com-plex shell considering the process variables such as drawing rate radius and blank development. In particular the difference between the limiting drawing rate and to optimum drawing rate has been discussed and the usefulness of present suggestion has been shown.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.5
• /
• pp.206-214
• /
• 1996

Because of the wide variety of the composite materials, inherent variability in properties, and complex temperature and strain rate dependence, large strain behavior of these materials has not been well characterized. Large strain behavior under uniaxial tension is characterized over a range of temperatures and strain rates, and a modified simple linear viscoelastic model is fit to the observed data. Of particular importance is the strain rate and temperature dependence of these composites, and it is the primary focus of this study. The strain rate and temperature dependence is then used to predict limiting tensile strains, based on Marciniak imperfection theory. Excellent correlation was obtained between model and experiment and the results are summarized in maps of forming limit as a function of strain rate and temperature.

• Journal of the Korean Professional Engineers Association
• /
• v.32 no.2
• /
• pp.99-109
• /
• 1999

The dried sea tangle added for soup prepatation to improved the taste in Korean and Japaness for long time. Attempts were made to develop the best procedures for extraction and removal of alginate by ultrafiltration and diafiltration. The summerized results of this study are as follows: 1) For hot water extraction in temperature range of 60～100$^{\circ}C$ for 4 hours, the higher temperature resulted higher yields in solids and protein. 2) Optimum sea tangle hot water extraction condition were 60～65$^{\circ}C$ for 1 hour which was cheap operating cost and high yield of good taste components. 3) The membrane flux was more higher GR 51 PP. and increase of flow rate permeate flow rate was accordingly increased. but limiting flow volume was 3.7 l/min. 4) It was found that ultration was relatively of higher recovery rate, solid and taste components, and low rejection coefficient rate than diafiltration.