• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.1
• /
• pp.23-28
• /
• 2024

As global warming accelerates, the transportation industry is increasing the use of lightweight materials with the goal of reducing carbon emissions. Magnesium is a suitable material, but its poor formability limits its use, so research is needed to improve it. Rare-earth elements are known to effectively control texture development, but their high cost limits commercial. In this study, changes in microstructure and texture were investigated by adding Pb, which is expected to have a similar effect as rare-earth elements. The material used is Mg-15wt%Pb alloy. Initial specimens were obtained by rolling at 773 K to a rolling reduction of 25% and heat treatment. Afterwards, plane strain compression was performed at 723 K with a strain rate of 5×10^-2s^-1 and a strain of -0.4 to -1.0. As a result, recrystallized grains were formed within the microstructure, and the main component of the texture changed from (0,0) to (30,26). The maximum axial density was initially 10.01, but decreased to 4.23 after compression.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.1
• /
• pp.93-100
• /
• 2020

A bacterial strain inhibiting the growth of Vibrio anguillarum, the causative agent of vibriosis, was isolated from fish intestines. The isolated strain HS36 was identified as Aerococcus urinaeequi based on the characteristics of the genus according to Bergey's Manual of Systematic Bacteriology and by 16S rRNA sequencing. The growth rate and antibacterial activity of strain HS36 in shaking culture were higher than those in static culture, while the optimal pH and temperature for antibacterial activity were 7.0 and 30℃, respectively. The active antibacterial substance was purified from a culture broth of A. urinaeequi HS36 by Sephadex G-75 gel chromatography, Sephadex G-25 gel chromatography, and reverse-phase high-performance liquid chromatography. Its molecular weight, as estimated by Tricine SDS-polyacrylamide gel electrophoresis, was approximately 1,000 Da. The antibacterial substance produced by strain HS36 was stable after incubation for 1 h at 100℃. Although its antibacterial activity was optimal at pH 6-8, activity was retained at a pH range from 2 to 11. The purified antibacterial substance was inactivated by proteinase K, papain, and β-amylase treatment. The newly purified antibacterial substance, classified as a class II bacteriocin, inhibited the growth of Klebsiella pneumoniae, Salmonella enterica, and Vibrio alginolyticus.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.272-276
• /
• 2005

Candida tropicalis, an osmophilic strain isolated from honeycomb, produced xylitol at a maximal volumetric production rate of 3.5 g $l^{-1}$ $h^{-1}$ from an initial xylose concentration of 200 g $l^{-1}$. Even with a very high xylose concentration, e.g., 350 g $l^{-1}$, this strain produced xylitol at a moderate rate of 2.07 g $l^{-1}$ $h^{-1}$. In a fed-batch fermentation of xylose and glucose, 260 g $l^{-1}$ of xylose was added, and xylitol production was 234 g $l^{-1}$ for 48 h, corresponding to a rate of 4.88 g $l^{-1}$ $h^{-1}$. To increase the xylitol production rate, cells were recycled in a submerged membrane bioreactor with suction pressure and air sparging. In cell-recycle fermentation, the average concentration of xylitol produced per recycle round, total fermentation time, volumetric production rate, and product yield for ten rounds were 180 g $l^{-1}$, 195 h, 8.5 g $l^{-1}$ $h^{-1}$, and 85%, respectively. When cell-recycle fermentation was started with the cell mass contratrated two-fold after batch fermentation and was performed for ten recycle rounds, we achieved a very high production rate of 12 g $l^{-1}$ $h^{-1}$. The production rate and total amount of xylitol produced in cell-recycle fermentation were 3.4 and 11 times higher than in batch fermentation, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.10
• /
• pp.844-849
• /
• 2008

We present a novel cell deformability monitoring chip based on the digitally measured cell lysis rate which is dependent on the areal strain of the cell membrane. This method offers simple cell deformability monitoring by automated high-throughput testing system. We suggest the filter design considering the areal strain imposed on the cell membrane passing through the filter array having gradually increased orifice length. In the experiment using erythrocytes, we characterized the cell deformability in terms of average fracture areal strain which was $0.24{\pm}0.014\;and\;0.21{\pm}0.002$ for normal and chemically treated erythrocytes, respectively. We also verified that the areal strain of 0.15 effectively discriminates the deformability difference of normal and chemically treated erythrocytes, which can be applied to the clinical situation. We compared the lysis rates and their difference for the samples from different donors and found that the present chips can be commonly used without any calibration process. The experimental results demonstrate the simple structure and high performance of the present cell deformability monitoring chips, applicable to simple and cost-effective cell aging process monitoring.

• Transactions of Materials Processing
• /
• v.33 no.1
• /
• pp.18-35
• /
• 2024

In the present work, the evolution rules for the internal variables including continuum damage factors are obtained using the thermodynamic framework, which are in turn facilitated to derive the elastic-plastic constitutive relation for the particulate composites. Using the Mori-Tanaka scheme, the homogenization on state and internal variables such as back-stress and damage factors is carried out to procure the rate independent plasticity relations. Moreover, the degradation of mechanical properties of constituents is depicted by the distinctive damages such that the phase and interfacial damages are treated individually accordingly, whereas the kinematic hardening is depicted by combining the Armstrong-Frederick and Phillips' back-stress evolutions. On the other hand, the present constitutive relation for each phase is expressed in terms of the respective damage-free effective quantities, then, followed by transformation into the damage affected overall nominal relations using the aforementioned homogenization concentration factors. An emphasis is placed on the qualitative analyses for strain localization by observing the perturbation growth instead of the conventional bifurcation analyses. It turns out that the proposed constitutive model offers a wide range of strain localization behavior depending on the evolution of various internal variable descriptions.

• Geomechanics and Engineering
• /
• v.34 no.5
• /
• pp.577-595
• /
• 2023

A dynamic triaxial discrete element numerical model of lightweight soil was established using the discrete element method to study the microscopic mechanism of expanded polystyrene (EPS) particles in the soil under cyclic loading. The microscopic parameters of the discrete element model of the lightweight soil were calibrated depending on the dynamic triaxial test hysteresis curves. Based on the calibration results, the effects of the EPS particles volume ratio and amplitude on the contact force, displacement field, and velocity field of the lightweight soil under different accumulated strains were studied. The results showed that the hysteresis curves of lightweight soil exhibit nonlinearity, hysteresis, and strain accumulation. The strain accumulated in remolded soil is mainly tensile strain, and that in lightweight soil is mainly compressive strain. As the volume ratio of EPS particles increased, the contact force first increased and then decreased, and the displacement and velocity of the particles increased accordingly. With an increase in amplitude, the dynamic stress of the particle system increased, and the accumulation rate of the dynamic strain of the samples also increased. At 5% compressive strain, the contact force of the particles changed significantly and the number of particles deflected in the direction of velocity also increased considerably. These results indicated that the cemented structure of the lightweight soil began to fail at a compressive strain of 5%. Thus, a compressive strain of 5% is more reasonable than the dynamic strength failure standard of lightweight soil.

• Nuclear Engineering and Technology
• /
• v.17 no.3
• /
• pp.211-215
• /
• 1985

The effects of temperature and strain rate on the I-SCC behaviors of Zircaloy-4 were investigated by constant load test at 30$0^{\circ}C$ and constant elongation rate test at 300, 350 and 40$0^{\circ}C$ in 3.34mg $I_2$/㎤. The results showed that I-SCC susceptibility increased as the strain rate decreased or the temperature increased. The empirical relation between the stress and the time to failure at 30$0^{\circ}C$ was given by 1/ $t_{f}$∝exp (0.3$\sigma$/$\sigma$$_{UTS}$-31.5) When the I-SCC susceptibility was expressed by the ratio of fracture energy in iodine atmosphere to that in the inert atmosphere, severe I-SCC susceptibility was found near 7.6$\times$10$^{-6}$ sec at 30$0^{\circ}C$ and the maximum point of I-SCC susceptibility tended to shift to the higher strain rate with increasing the temperature. The quasi-cleavage fracture was observed in I-SCC fracture surface. From these results, it was certain that the film repture step was involved as an important process in the I-SCC mechanism of Zircaloy-4.4.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.3
• /
• pp.602-608
• /
• 2010

An atrazine-degrading bacterium, strain KU001, was obtained from a sugarcane field at the Cane and Sugar Research and Development Center at the Kasetsart University, Kamphaeng Saen Campus, Thailand. Strain KU001 had a rod-to-coccus morphological cycle during growth. Biolog carbon source analysis indicated that the isolated bacterium was Arthrobacter histidinolovorans. Sequence analysis of the PCR product indicated that the 16S rRNA gene in strain KU001 was 99% identical to the same region in Arthrobacter sp. The atrazine degradation pathway in strain KU001 consisted of the catabolic genes trzN, atzB, and atzC. Strain KU001 was able to use atrazine as a sole nitrogen source for growth, and surprisingly, atrazine degradation was not inhibited in cells grown on ammonium, nitrate, or urea, as compared with cells cultivated on growth-limiting nitrogen sources. During the atrazine degradation process, the supplementation of nitrate completely inhibited atrazine degradation activity in strain KU001, whereas ammonium and urea had no effect on atrazine degradation activity. The addition of strain KU001 to sterile or nonsterile soils resulted in the disappearance of atrazine at a rate that was 4- to 5-fold more than that achieved by the indigenous microbial community. The addition of citrate to soils resulted in enhanced atrazine degradation, where 80% of atrazine disappeared within one day following nutrient supplementation.

• Microbiology and Biotechnology Letters
• /
• v.4 no.3
• /
• pp.105-110
• /
• 1976

In the studies of microbiological utilization of cellulosic wastes, cellulolytic fungi were isolated and screened out. At the first stage, 221 cellulolytic fungi were isolated from different sources such as soils, humus, composts and rotten wood debris by enrichment culture techniques. In the second stage, 36 strains of fungi out of those previously isolated were selected for their cellulase activities estimated by means of filter paper degradation, carboxy methyl cellulose liquefaction and cup method. Activities of C$_1$-cellulase, C$\sub$x/-cellulase and filter paper activity were adopted on the final screening stage and five different strains which are tentatively identified as Aspergillus sp.(strain No. AS-9), Penicillium sp. (strain No. KNI-1-2), Trichoderma, sp. (strain No. KI-7-2, KI-7-5, KI-4-1-1B) were selected for their high potency of C$_1$ and C$\sub$x/-cellulase activities. When rice straw milled and treated with NH$_4$OH was hydrolyzed with the crude enzyme Prepared from the culture broth of Trichoderma sp. (strain No. KI-4-1-1B), saccharification rate was obtained up to 26％.

• The Korean Journal of Mycology
• /
• v.12 no.3
• /
• pp.99-103
• /
• 1984

Hyphal growth by Fusarium moniliforme was best at -14 bars osmotic water potential. Hyphal growth was prevented at -94 bars. The production of microconidia was best at -14 bars osmotic potential and prevented at -84 bars regardless of Strain. In contrast, this fungus sporulated macroconidia best at -1.4 bars and progressively less with each increment drop in water potential below that of basal media. The rate of spore germination followed a similar pattern with all of the spores; uniformly maximal at about -1.4 bars and progressively slower as the water potential was lowered from -1.4 bars to -42 bars. Under the natural conditions, plants infected by F. moniliforme produce microconidia on the dead tissues instead of producing macroconidia. This phenomenon agrees well with the water potential experiment since the dead plant tissues have a lower water potential than the living plant.