• Applied Biological Chemistry
• /
• v.32 no.4
• /
• pp.424-434
• /
• 1989

The rationale for the use of fungi in treating waste streams from food processing plants I~as been that of incorporating the dissolved and suspending nutrients into a macroscopic organism which can be filtered out readily. In order for a process using fungi to meet these objectives we examined a strain of fungi, Aspergillus fumigatus, which grew well on a variety of polysaccharide-containing materials and showed both efficient BOD removal and high quality protein recovery. In this experiment the fungal choice was based on the laboratory screening studies where the criteria used was BOD and COD reduction, growth response, mycelial yield, and the ability to compete with the natural flora. In the fermentation system used far the continuous culture of Aspergillus fumigatus the best combination of operating variables, inoculum ratio, temperature, initial pH, fermentation time and agitation rate was 5%(v/v), $35{\sim}40^{circ}C,\;pH\;4.5{\sim}5.0$, 2days and 150rpm, respectively. The fungus reduced BOD and COD to 94.0 and 90.4%, respectively and 3.15g of dry mycelium per liter of alcohol waste was harvested during 48hr of incubation time. The protein efficiency ratios for the control diet and the experimental diet containing the fungal protein were $3.42{\pm}0.15$ and $3.40{\pm}0.43$, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.3
• /
• pp.191-196
• /
• 2005

Fusarium head blight (FHB) is a severe disease problem that affects the quality and yield of barley grain. The evaluation of FHB resistance is difficult because environmental conditions greatly influence FHB infection and development. The objectives of this study were to: 1) establish an efficient screening method for selecting resistant barley to FHB, 2) compare FHB severity between the cut-spike method and pot-plant method for development of mass screening, and 3) estimate FHB resistance for barley germplasms. Barley cultivars and lines were evaluated for reaction to FHB in controlled-greenhouse condition. Spikes were spray-inoculated with a suspension $(5.0\times10^5\;macroconidia\;mL^{-1})$ of Fusarium graminearum SCK-O4 strain, and then kept in a greenhouse at $18-25^{\circ}C$ with $80-100\%$ relative humidity. Inoculation were employed at 3 different heading growth stages (heading date, three days after heading, and five days after heading). The inoculation was performed in 2 consecutive days in order to avoid escapes. The inoculated plants were maintained in the greenhouse at 4 different free moisture periods (1, 3, 5, and 7 days). The percentage of FHB severity was scored from 0 to 9 according to the rate of infected kernels per spike, and three spikes were evaluated per replication with 3 replicates. There were significant differences of FHB severity depending on the different free moisture periods, but not by the inoculation at different heading stages. The optimum evaluation point of FHB severity in the greenhouse condition was on the 7th day under free moisture condition after inoculation at the heading date. Infection level in cut-spike method highly correlated with that in pot-plant method. This suggested that cut-spike method is useful in evaluating of FHB resistance in barley. Six cultivars, such as Jinkwang, Buheung, Atahualpha 92, Chevron-b, Gobernadora-d, and MNBrite-c, were selected as resistant varieties to FHB. Correlation coefficient for the FHB severity evaluated by the pot-plant method between two seasons was 0.794, indicating the stability and accuracy of the screening method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.107-114
• /
• 2017

A turbocharger is an engine supercharger that is driven by exhaust gas. It improves the output and fuel efficiency by increasing the charging efficiency of the mixture gas, which is achieved by changing the rotatory power of the turbine connected to the exhaust passage. It is important to control the supercharging for this purpose. A nozzle slide joint is one of the core parts. Austenitic stainless steel is currently used as the material for this part, and its excellent mechanical properties include high heat resistance and corrosion resistance. However, because of its poor machinability, there are many difficulties in producing products with complicated shapes. Machining is used in the production of nozzle slide joints for high dimensional accuracy after metal powder injection molding. As design variables in this study, we investigated the sintering temperature, product stress, deformation rate, radius of curvature of the punch, and angle of the chamfer punch, which are related to the strain and shapes. The goal is to suggest a forming process using Nitronic 60 that does not require machining to manufacture a nozzle slide joint for a turbocharger. Accordingly, we determined the best process environment using finite-element analysis, the signal-noise ratio, and the Taguchi method for experiment design. The relative density and hydrostatic pressure of the final product were in accordance with the results of the finite element analysis. Therefore, we conclude that the Taguchi method can be applied to the design process of metal powder injection molding.

• Journal of Aquaculture
• /
• v.11 no.2
• /
• pp.203-212
• /
• 1998

As seed production program is growing prosperously in various fishes in southern Korea, disease problems in larval and juvenile stages have emerged as a new research object. The following results were obtained from investigation about environmental factors related to mass mortalities of young Kinki red seabream, Pagrus major in process of artificial seedling production. Total length of red seabream larvae hatched was 2.93mm, and became 18.83~20.12mm at day 40. The first noticeable mortality of red seabream larvae (7.98~9.37mm) occurred in 25~30 day-old fish with the survival rates of 59.8~60.3%. Thereafter the mortality of larvae decreased, survival rate was 20.5~25.45% in day 40. After 20~30 days, the quality of pond water was bellow II class. During the experimental period COD, $PO_4$-P, $NO_2$-N, $NO_3$-N and $NH_$-N increased up to 3, 7, 34, 6 and 8 times, respectively, compared to initial ones. The number of viable bacteria in pond water and seabream larvae were $6.3{\times}10^6$~$2.3{\times}10^7$ cfu/ml, 4.3~$7.4{\times}10^6$ cfu/g in day 25, respectively. Among the isolated bacteria from the diseased red seabream in day 25, Vibrio spp. was considered to be the causative organism. External symptoms of this disease were floated, spined near the surface and inflated abdomen. When the isolated strain of the Vibrio was bathed to seabream larvae, $LD_50$ of seabream larvae was over $10^6$ cfu/ml of Vibrio spp.

• Korean Journal of Poultry Science
• /
• v.15 no.2
• /
• pp.73-79
• /
• 1988

In order to study the effects of feeding time (08：00 and 14：00 hours) and frequency (once a day, twice a day and once every other day) on the performances of broiler breeder hens, two experiments were conducted with 1, 248 hens of Maniker strain during 24－2 weeks (Experiment 1) and 42－60 weeks (Experiment 2) of age. The results obtained are summarized as follows ： 1. No significant differences were observed in hen－day egg production and feed conversion rate between feeding times or among feeding frequencies through the entire experimental period. 2. Mean egg weight during the age of 24－42 weeks was significantly increased by feeding in the afternoon (p＜0.01). But it was not significantly affected by feeding time or frequency during 42－60 weeks of age. 3. Fertility and hatchability of eggs at 36 weeks and 60 weeks of age were not significantly different among treatments. 4. By feeding in the afternoon egg breaking strength at 60 weeks of age was significantly improved (p＜0.05), but not at 36 weeks of age. 5. In diurnal distribution of egg production, hens fed in the afternoon produced more eggs in the afternoon than hens fed during the morning (p＜0.01).

• Journal of fish pathology
• /
• v.1 no.2
• /
• pp.77-85
• /
• 1988

In March 1987, a bacterial disease occured among cultured tilapia (Oreochromis niloticus), in the aquarium of Fish Pathology Laboratory of National Fisheries University of Pusan. The diseased fish showed abdominal inflamation of ascites. The causative organisms isolated from the kidney were Gram negative rods. On SS agar colonies developed within 48 hours at $25^{\circ}C$. On the basis of the morphological and biochemical characteristics the organisms were identified as Edwardsiella tarda. They were sensitive to chloramphenicol, ampicilline and oxytetracycline. The pathogenicity was proved positive by intraperitoneal injection. Three kinds of antigen were prepared with E. tarda for the immune response in tilapia : i.e., by inactivating the strain with 0.4% formalin for 24 hrs at $25^{\circ}C$ ultrasonicating it 3 times with 5 watts for 30 seconds each time and filtrating it through millipore filter. The formalin killed antigen showed good efficacy at the injection concentration of over $10^7$ cells per fish of 50g. All the immunized tilapia showed only a little agglutination titer to the three antigens. The highest survival rate was recorded in challenged tilapia immunized with formalin killed cells.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.3
• /
• pp.51-62
• /
• 2015

Shear behavior obtained by direct shear tests is dependent on shear box and boundary condition. The objective of this study is to analyze problems of conventional direct shear test (type-A) and provide the reliable results by developing type-C direct shear apparatus. Experimental tests are carried out for Ulleung sand by using type-A and -C direct shear devices. The soil specimens, which are prepared at the relative density of 60%, and are applied to vertical confining stresses of 50, 100, 200, 300, and 400 kPa, are sheared at a constant shear strain rate of 0.5 mm/min. By comparing the results obtained by type-A and -C direct shear apparatus under constant normal load (CNL) condition, the performance of new one is verified. In addition, two constrained conditions including constant normal load (CNL) and constant pressure (CP) are applied to type-C one. Experimental results show that type-A direct shear apparatus has some problems such as rotating of loading plate and upper shear box, and the frictional forces between soil and inner wall of upper shear box. Thus, the shear strengths obtained by type-A device are overestimated or underestimated depending on shear box and boundary condition. On the other hand, type-C device produces clear and consistent test results regardless of constrained conditions. This study represents that type-C direct shear apparatus not only can solve the problems of type-A direct shear apparatus but provide the reliable results.

• Applied Biological Chemistry
• /
• v.51 no.1
• /
• pp.1-5
• /
• 2008

Salt accumulation in soils of greenhouse due to the massive application of nitrogen fertilizers causes salt stress on the various crops, a serious problem in domestic agriculture. Since the majority of the salinity is nitrate, the excess nitrate should be removed; therefore, a bacterial strain having high capacity of nitrate uptake and identified as Enterobacter amnigenus GG0461 was isolated from the soils of greenhouse. Optimum conditions for the bacterial growth and nitrate uptake were investigated. GG0461 was able to grow without nitrate; however, nitrate facilitated the growth. The rate of nitrate uptake increased at alkaline pH and both growth and nitrate uptake were maximal at pH 8-9. When the initial pH of culture medium was increased to pH 8 or 9, it was decreased to neutral upon bacterial growth and nitrate uptake. These results imply that the major factor mediating bacterial nitrate uptake is a nitrate/proton antiporter. The fact was supported by the effect of nitrate addition in the absence of nitrate, since the addition of nitrate greatly increased the nitrate uptake and rapidly decreased pH of media.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.516-521
• /
• 2018

"Nulichal" was developed by the National Institute of Crop Science, RDA, in 2010. The initial cross was conducted in 2000, and an elite line (HB15305-B-B-31-2) was selected in 2005. Subsequently, preliminary yield and advanced yield trials have designated it as "Iksan 95." It showed good agronomic performance in regional yield trials from 2008 to 2010 and was released as "Nulichal," with resistance against the barley yellow mosaic virus (BaYMV) and high yields with a waxy endosperm. The average heading and maturation dates of "Nulichal" were April 24 and May 30, respectively in paddy fields, which were 1 day later than those of the check cultivar "Saechalssalbori." It had culm and spike lengths of 82 and 4.0 cm, respectively. It showed $774spikes/m^2$, 63 grains/spike, 25.0 g of 1,000-grain weight, and 793 g of test weight. "Nulichal" showed higher levels of resistance to BaYMV than the naturally occurring Iksan (type III strain), Naju (type I), and Jinju (type II). The expansion rate was higher than that of "Saechalssalbori" and its hardness, gumminess, and chewiness were lower than those of "Saechalssalbori." Its average pearled grain yield in the regional yield trial was 4.00 MT/ha in paddy fields, which was 10% higher than that of the check cultivar. The combined availability of "Nulichal" was improved by its increased culm length compared with that of "Hinchalssal."

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.135-146
• /
• 2020

In the strawberry cultivation areas and domestic farms, two-spotted spider mites are the most serious pests. It decreases the product yield due to the direct feeding of chlorophyll by the mites resulting in reduced photosynthetic ability of host plant. In this study, a simplified acaricidal effect evaluation system (SAEES) was employed to choose the effective acaricidal products among 10 items based on leaf-dipping bioassay methods. SAEES had the advantage of being able to screen four commercial products with three replications at the same time in the recommended concentration. The susceptible strains (SL_YS) showed a high mortality rate of about 90-100%, whereas the mortality of local strains was differed by each acaricides. It suggests that the acaricide responses of field populations might differ due to spray frequencies and acaricide product. An efficacy index (0.8-1.0) was determined based on the mortality of susceptible strain, which would allow the most effective commercial products to be selected by the range of this index. In summary, SAEES will enable the selection of effective commercial products and contribute to increasing control against T. urticae in strawberries.