• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.164-170
• /
• 2019

The absorption and release capacities, survival efficiency, and recovery rates of five kinds of transport media were evaluated based on the swab elution method (Quantitative) of CLSI (Clinical and Laboratory Standards Institute) M40-A2. Liquid media showed mostly better results than semi-solid media in the three evaluations. The flocked swabs had better ability to absorption and discharge bacteria than the standard swabs. The liquid medium (S4) had the best survival efficiency. Pneumococcal strains with poor growth had a higher survival efficiency and recovery rate in liquid media (S4, S5). The results of microbial recovery showed that S. pyogenes met all the CLSI standards in all media. S. pneumoniae was inadequate in the semi- solid media (S2, S3) and all the remaining media met the criteria. H. influenzae was unsuitable in semi-solid media (S1, S3) and met the criteria in semi-solid medium (S2) and liquid medium (S4, S5). The viability of the H. influenzae, pneumococcal strain causing respiratory disease, was poor in most media. Overgrowth of P. aeruginosa was observed at room temperature. The combination of liquid medium and flocked swab confirmed the best results in the three evaluation methods.

• Korean Journal of Veterinary Service
• /
• v.23 no.2
• /
• pp.143-152
• /
• 2000

Sulfamethazine sodium was orally administrated to sprague-dawley strain male rats(body weight, 200-300g) with using sonde at the rate of 20 mg/100g body weight(recommended therapeutic dose) on once a day for 3 days. There were investigated the depletion rate of the sulfamethazine in serum, liver and skeletal muscle of rat at the time 8 hours, 1st, 2nd, 3rd, 4th, 5th and 6th day after administration sulfamethazine sodium. 1. The mean concentrations of sulfamethazine in serum according to the time lapsed after oral administration of the sulfamethazine soudijm were showed 215.53$\pm$42.99 ppm at the 8 hours after withdrawal of medicated sulfamethazine. And gradually according to the time lapsed, the concentrations of sulfamethazine residues in serum were significantly (p<.05) decreased 25.87$\pm$5.18 ppm at 1st day, 2.30$\pm$0.61 ppm at 3rd day and 0.11$\pm$0.02 ppm at 6th day after withdrawal of medicated sulfamethazine. 2. The mean concentrations of sulfamethazine in liver were significantly (p<.05) decreased 81.77 $\pm$ 12.88 ppm to 0.11$\pm$0.03 ppm between 8 hours and 6th day according to the time lapsed after oral administration of the sulfamethazine sodium for 3 days. 3. After oral administration of the sulfamethazine sodium, the mean concentrations of sulfamethazine in skeletal muscle were significantly (p<.05) decreased 35.96$\pm$1.39 ppm to 0.009$\pm$0.001 ppm between 8 hours and 6th day after withdrawal of medicated sulfamethazine. At the 4th day, the concentrations of sulfamethazine residues were showed 0.10 $\pm$ 0.04 ppm below 0.1 ppm at the permitted limit concentration of muscle in Korea. 4. After oral administration of the sulfamethazine sodium once a day for 3 days, there were showed the highest concentration in serum (215.53$\pm$42.99 ppm) than in liver(81.77$\pm$12.88 ppm) and skeletal muscle (35.96$\pm$1.39 ppm) at the 8 hours after withdrawal of medicated sulfamethazine. The mean concentration of sulfamethazine residues in serum, liver and skeletal muscle were gradually decreased according to the time lapsed.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.4
• /
• pp.177-183
• /
• 2016

Sewage treatment using microorganisms is affected by multiple factors such as microbial properties, characteristics of sewage and operating conditions, and nanoparticles inflow may cause negative effects on sewage treatment system especially on the system stability and efficiency. It was studied to assess the toxic effects of nanoparticles on microorganism growth. The activated sludge in the sewage treatment plant of university was cultured in the optimized medium for each strain. Bacillus (gram-positive), Pseudomonas and E.coli (gram-negative) in the activated sludge were selected as target microorganisms, and ZnO and $TiO_2$ were chosen as nanoparticles. For same concentration of nanoparticles, average growth inhibition rate of Bacillus was 60% or more, while that of Pseudomonas was less than 10%. The toxicity of nanoparticles was shown to be higher for gram-positive bacteria than gram-negative bacteria because of their differences on structure of cell wall, components of cell wall protein, physiology of cells and metabolism. ZnO affected 3 times more negative on the growth of microorganisms as compared to $TiO_2$. It was assumed that, therefore, toxicity of ZnO was found to be greater than $TiO_2$.

• Korean Journal of Veterinary Service
• /
• v.20 no.1
• /
• pp.103-125
• /
• 1997

An epidemiologic study on pleuropneumonia in the slaughter pigs(Chonan and Asan area, Chungnam province, Korea) during the period of January 1994 through December 1995 was conducted. Isolation of A pleuropneumoniae was attempted in 425 pigs with pneumonic lesions. Biochemical properties, antimicrobial susceptibility, serotypes and pathogenicity of isolated A pleuropneumoniae were investigated. In addition, outer membrane protein(OMP) of the Isolates were extracted to determine its properties and immunogenicity in both mice and piglets The results obtained through this study were summarized as followed ; 1. Of 3, 395 slaughter pigs, pleuropneumonia was observed in 425 pigs(10.6%). A pleuropneumoniae was isolated from 22 pigs(5.2%) out of 425 pigs with pneumonic lesions. The biochemical properties of all isolates were same as those of reference A pleuropneumoniae strain. Among 22 isolates, 9, 1 and 12 isolates were serovar 2, 3 and 5, respectively. 2. The results of antimicrobial susceptibility test revealed that the isolates showed high susceptibility to ciprofloxacin and cephalothin, moderate susceptibility to amikacin, gentamicin, kanamycin and streptomycin, and low susceptibility to erythromycin, tylosin and sulfadimethoxin. 3. The isolates were varied in pathogenicity to mice. Median lethal dose of LE9402(serovar 2) and LE9511(serovar 5) were $9.2{\times}10^7$ CFU and $2.8{\times}10^7$%CFU, respectively. Specific pneumonic lesions were observed from the infected mice with clinical signs. Bacteria recovery rate was high in the lung, but low In heart blood and tracheas. 4. Serovar 2 was found to be more pathogenic than serovar 5 in guinea pig. Mortality on guinea pigs inoculated with serovar 2($5.4{\times}10^8-5.4{\times}10^6$CFU) and serovar 5($2.8{\times}10^8-2.8{\times}10^6$ CFU) was 20~40% and 40~80%, respectively. A severe hemorrhagic lesions and focal pneumonic lesions were observed from dead guinea pigs. Bacteria recovery rate was relatively higher in the lung than that of other organs. 5. In the SDS-PAGE analysis, OMP-enriched fractions of both isolates and reference strains contain common peptide bands equivalent to molecular weight of 17, 27, 42, 52 and 95Kd. In addition to common peptide bands, the bands which are specific to each isolate were also observed. The profiles of Sephadex G25 fractions showed 3 major peaks. The common peptide bands which were observed by SDS-PAGE of the crude OMPs were found in the peaks 1 and 2. 6. The OMPs extracted from serovar 2(LE9402) and serovar 5(LE9511) provided high level of protection in mice(70~80%) and pigs(100%). All animals inoculated with OMPs were seroconverted, showing micro-agglutination titer of 640 to 1280.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.288-294
• /
• 2013

Recently, sustainable production of biofuel using algal biomass is being pursued because of its enormous potential. First and foremost, securing superior strains to develop an efficient production system for algal biodiesel through screening or genetic improvement of microalgae is necessary. The genus of Botryococcus is regarded as one of the superior microalgae for biodiesel production due to its ability to accumulate high amounts of lipids and hydrocarbons. However, its low growth rate is a bottleneck for large-scale production and commercialization. The purpose of this study is to obtain indigenous Botryococcus strains which possess high lipid content and biomass productivity. The Botryococcus sp. was isolated from the Seobu Reservoir in Jeju Island and identified as Botryococcus sudeticus J2 by comparative analysis of 18s rRNA gene and ITS regions. The biomass productivity and lipid content of B. sudeticus J2 were 0.116 g $L^{-1}day^{-1}$ and 40.1% of dry wt., respectively. This was higher than the value of B. braunii UTEX 572, which is widely regarded as a superior strain among Botryococcus species. The relatively high growth rate of B. sudeticus J2 was achieved under a light intensity of 240 ${\mu}mol$ photons $m^{-2}s^{-1}$ with ambient air spargingwhen compared to 120 ${\mu}mol$ photons $m^{-2}s^{-1}$ with 2% $CO_2$ supply. In summary, it is likely that the isolated B. sudeticus J2 can be used for the mass cultivation and biodiesel production.

• Korean Journal of Dental Materials
• /
• v.43 no.4
• /
• pp.343-349
• /
• 2016

This experiment was carried out to examine whether the post-firing heat treatment is effective in increasing the hardness of metal-ceramic alloy of the Pd-Au-Ag-Sn system. Precipitation hardening by holding at $600^{\circ}C$ after simulated complete porcelain firing in a metal-ceramic alloy of the Pd-Au-Ag-Sn system was examined by observing the change in hardness, crystal structure, and microstructure using a hardness test, X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM). The hardness of the alloy increased apparently by holding the specimen at $600^{\circ}C$ for 30 min after simulated complete porcelain firing. The formation of fine grain interior precipitates during holding at $600^{\circ}C$ caused the formation of lattice strain in the grain interior, resulting in apparent hardening. The faster cooling rate (stage 0) during simulated complete porcelain firing resulted in more effective precipitation hardening during holding at $600^{\circ}C$. From the above results, an appropriate post-firing heat treatment, such as holding at $600^{\circ}C$ for 30 min after complete porcelain firing may increase the durability of metal-ceramic prostheses composed of Pd-Au-Ag-Sn alloy.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.29-35
• /
• 2003

The Sn-based lead-free solders with varying microstructure were prepared by changing the cooling rate from the melt. Bulky as-cast SnAg, SnAgCu, and SnCu, alloys were cold rolled and thermally stabilized before the creep tests so that there would be very small amount of microstructural change during creep (TS), and thin specimens were water quenched from the melt (WQ) to simulate microstructures of the as-reflowed solders in flip chips. Cooling rates of the WQ specimens were 140∼150 K/sec, and the resultant $\beta-Sn$ globule size was 5∼10 times smaller than that of the TS specimens. Subsequent creep tests showed that the minimum strain rate of TS specimens was about $10_2$ times higher than that of the WQ specimens. Fractographic analyses showed that creep rupture of the TS-SnAgCu specimens occurred by the nucleation of voids on the $Ag_3Sn$ Sn or $Cu_6Sn_5$ particles in the matrix, their subsequent growth by the power-law creep, and inter-linkage of microcracks to form macrocracks which led to the fast failure. On the other hand, no creep voids were found in the WQ specimens due to the mode III shear rupture coming from the thin specimens geometry.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.747-752
• /
• 1999

The interfacial reaction and joint properties of Sn-3.5Ag/Cu and Sn-3.5Ag-1Zn/Cu joint were studied. Modified double lap shear solder joints of Sn-3.5Ag and Sn-3.5Ag- lZn solder were aged for 60days at $100^{\circ}C$ and $150^{\circ}C$ and then loaded to failure in shear. The Sn-3.5Ag/Cu had a fast growth rate of the reaction layer in comparison with the Sn-3.5Ag-lZn at the aging temperature of $150^{\circ}C$ Through the SEM/EDS analysis of solder joint, it was proved that intermatallic layer was $Cu_{6}Sn_5$ phase and aged specimens showed that intermatallic layer grew in proportion to $t_{1/2}$, and the precipitate of $Ag_3Sn$ occur to both inner layer and interface of layer and solder. In case of Zn-containing composite solder, $Cu_{6}Sn_{5}$ phase formed at the side of substrate and $Cu_{5}Zn_{8}$ phase formed at the other side in double layer. The shear strength of the Sn-3.5Ag/Cu joint improved by addition of IZn. The strength of the joint increases with strain rate and decreases with aging temperature

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1158-1163
• /
• 2006

Bisphenol A (BPA), 2,2-bis(4-hydroxyphenyl) propane, has been widely used as a monomer for production of epoxy resins and polycarbonate plastics, and final products of BPA include adhesives, protective coatings, paints, optical lens, building materials, compact disks and other electrical parts. Since BPA is a toxic chemical to elicit acute cell cytotoxicity and chronic endocrine disrupting activity, the degradation of BPA has been focused during last decades. To overcome the problem of photo-, and chemical-degradation of BPA, in this study, a bacterium that is able to biodegrade BPA, was isolated. The bacterium, isolated froln the soil of plastic factory, was identified as Acinetobacter calcoaceticus (strain BP-2) based on physiological and 16S rDNA sequencing analysis. A. calcoaceticus BP-2 was able to grow in the presence of $1140{\mu}g\;ml^{-1}$ BPA. Biodegradation experiments showed that BP-2 mineralized BPA via 4-hydroxybenzoic acid and 4-hydroxyacetophenone, and average degradation rate was $53.3{\mu}g\;ml^{-1}\;day^{-1}$ under optimal conditions (pH 7 and $30^{\circ}C$). In high density resting cell $(3.5g-dcw.1^{-1})$ experiments, the maximal degradation rate was increased to $89.7{\mu}g\;ml^{-1}\;h^{-1}$. Our results suggest that BP-2 has high potential as a catalyst for practical BPA bioremediation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.5
• /
• pp.749-755
• /
• 2014

Exopolysaccharides (EPSs) have been widely used in the food industry as viscofying, stabilizing, and emulsifying agents as well as in the pharmaceutical industry for their immunomodulatory, anti-tumor, and anti-inflammatory effects. A total of 458 lactic acid bacteria (LAB) strains isolated from several kinds of soybean pastes were screened for the production of homo-EPS (HoPS). LAB isolates were primarily screened using thin layer chromatography (TLC) and further screened polymerase chain reaction (PCR) targeting genes involved in HoPS production. Six LAB isolates producing high amounts of HoPS were identified by TLC. Among these isolates, glucansucrase gene was amplified in two strains (JSA57, JSB22), whereas the fructansucrase gene was detected in three strains (JSA57, JSB22, JSB66). After isolating the strains, their morphological characteristics and 16S rDNA sequences were determined. Six species were identified as L. alimentarius HSB15, L. plantarum JSA22, L. pentosus JSA57, L. brevis JSB22, L. alimentarius JSB66, and L. parabrevis JSB89. To evaluate the potential probiotic properties of these LAB, their survival rates against a simulated intestinal environment were determined. After 2 hr of incubation in artificial gastric juice, survival rates of JSA57, JSB90, JSB22, and JSB66 were all greater than 50%. After 2 hr of incubation in bile juice, viable cell count of JSB22 was similar with initial vial cell counts. Growth of the six LAB was screened in arabino-oligosaccharide (AOS)-containing MRS broth. Results showed that growth of the isolates selectively increased after culture in AOS-containing media. Strain JSB22 (6 hr), JSB66 (6 hr), HSB15 (20 hr), and JSA22 (29 hr) showed maximum growth rate. Especially, JSB22 showed the highest growth rate. These results suggest that EPS-producing LAB isolated from Deonjang could be applied as synbiotics.