• Korean Journal of Crystallography
• /
• v.3 no.2
• /
• pp.120-128
• /
• 1992

Single crysals of BaTiO3 were grown by TSSG technique at various cooling rates. Morpolo girts, defects and domain structures of the grown crystals were investigated. At the cooling rates below 0.5℃/hr, equant single crystals were obtained and the 11111 faces were dominantly developed. If the cooling rate was much faster or if the vortical temperature gradient in the so lotion was very large, the solution became unstable and the needle formed BasTil04 o crystals were precipitated. Two sets of parallel lamella domains are arranged perpendicular to each other and the irregularly shaped boundaries are fixed between them. These sets of domains show remarkable orientation contrast in x-ray topography. Heating the crystal above 127℃, the phase transition from tetragonal to cubic occurs. The phase transition front (PTF) moves in the direction of temperature gradient. Domains in the tetragonal phase are successively rearranged and regular strain patterns appear in the cubic phase. The habit plane of PTF in BaTi03 is found to deviate from a l1101 lattice plane by app roximately 9°.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.88-93
• /
• 1989

To improve a new yeast strain capable of converting xylan to ethanol directly, we tried protoplast fusion between xylose fermenting yeast (Candida sp. X-6-41) and xylan assimilating yeast (Crypto-coccus sp. XB-33), finally selected the most promising two fusants (XFU-1 and XFU-2). As the optimum conditions for protoplast formation, the yeast cells were cultured to exponential phase in YPD and YPX containing 0.6M KCI, respectively, and then treated with zymolyase (0.25mg/$m\ell$), cellulase(4mg/$m\ell$) and 100mM 2-mercaptoethanol at pH 8 and 3$0^{\circ}C$. The protoplasts of parental auxotrophs were fused in the presence of 20mM CaCl$_2$and 40% polyethylene glycol(M.W.4000). The physiological and morphological characteristics of the fusants, such as assimilation of carbon sources, cell size, growth rate, xylanase activity and xylan fermentation ability were investigated. Xylanase activity of fusants that cultured in chemically minimal medium was higher than that of fusants that cultured in completed medium, because xylanase producing activity of xylose fermenting yeast(X-6-41) was inhibited by isoleucine.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.184-189
• /
• 2005

In order to select probiotics having both a high survival rate and an ability to inhibit virulent pathogens, we have screened lactic acid bacteria and yeasts from Jeot-gal to examine their resistance to artificial gastric and bile juice. After being introduced in the artificial gastric acid for 2 hr, the isolated lactic acid bacteria and yeast were incubated for 24 hrs in the artificial bile juice. In particular, the strain ML 36, ML 128, and ML 178 survived the longest during 2 hr incubation period in the artificial gastric acid. All 3 strains of lactic acid bacteria, and 2 strains of yeast demonstrated higher growth rates than control in the artificial bile. In addition, the antimicrobial activity of lactic acid bacteria and yeasts was investigated to determine their efficiency as probiotic organisms. The lactic acid bacteria inhibited Gram positive and negative bacteria, while the yeast was marginally inhibited.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.745-751
• /
• 2014

For the multi-nozzle propulsion, the rupture pressure of nozzle closure has an effect on the initial strain rate of ignition. Moreover, the deviation of rupture pressure for each nozzle closure leads to side forces which can disturb the attitude control of rocket. When designed, it should be considered whether nozzle closures are ruptured equally and exactly in the intented pressure. In this paper, the rupture behavior is analyzed by analytical and experimental methods for plate and "+" notched nozzle closures. The rupture pressure and deviation for operating temperature, whether notched or not and notched directions are analyzed. This paper provides a comparison between rupture pressure prediction of finite elements method which tool is Abaqus/Explicit and results of the rupture test. Jonson-Cook shear failure model which corresponds to the damage initiation criterion were used in this simulation.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.806-811
• /
• 2007

The derailment is defined as phenomena in which the wheels run off the rail due to inordinate lateral force generated when wheel flange contacts with the rail. Derailment coefficient is typical standard assessing running safety and derailment. The traditional method measuring by strain gage adhered to wheels is very complicated and easy to fail. It also requires too much cost and higher measurement technique. Therefore it can hardly ensure safety because we can't confirm at which time we need to identify safety. In this paper, we principally researched the method measuring easily wheel load generated by contacts between wheel flange and the rail, and lateral force. Correlation of vibration and displacement which was related physical amounts of wheel load and lateral force, was investigated and analyzed through analysis, experiment and measurement. And it is presents new measurement method of derailment coefficient which can estimate derailment possibility only by movement of vibration and displacement, by which we understand the rate for acceleration and displacement to contribute wheel load and lateral force and compare actual data of wheel load and lateral force measured from wheel.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.317-320
• /
• 2008

In recent year, the ultra high strength concrete has highly increased and been used in many parts of the world. However, the viscosity of the ultra high strength concrete is high because of a low water to binder ratio (w/b). So that in this pater, the shear stress and the shear strain rate are directly measured by the viscometer in order to estimate the rheological properties of the ultra high strength concrete and a linear regression analysis was carried out to determine the plastic viscosity and the yield stress as slope. According to the test results, the yield stress and plastic viscosity are correlated to slump-flow, V-funnel flow time, O-lot flow time

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.4
• /
• pp.81-90
• /
• 2008

This paper presents a finite element formulation for the three-dimensional hierarchical solid element using Integrals of Legendre polynomials. The proposed hexahedral solid element is composed of four different modes including vertex, edge, face, and internal mode, respectively. The eigenvalue and patch test have been carried out to confirm the zero-energy mode and constant strain condition. In addition to these, a posteriori error estimation has been studied for the p-adaptive finite element analysis that is based on a smoothing technique to compute a post-processed solution from the finite element solution. The uniform p-refinement and non-uniform p-refinement are compared in terms of convergence rate as the number of degree of freedom is increased. The simple cantilever beam is tested to show the performance of the proposed solid element.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.1
• /
• pp.51-62
• /
• 2001

In-situ stress measurement using AE (Acoustic Emission) and DRA (Deformation Rate Analysis) is usually carried out under uniaxial loading in the laboratory and it consumes delay time from drilling to testing. Therefore, it should be considered how the lateral stress and delay time influence on the test results for the in-situ stress determination. As the delay time increased, the accuracy of estimating the pre-stress decreased. The pre-stress of the specimen loaded only axially was determined within an error of less than 9% (using AE) and 4% (using DRA). And the specimen on which axial pre-stress and the confining pressure were loaded had an error of less than 17% (using AE) and 14% (using DRA). The results of AE and DRA for field specimens were very similar with each other but smaller than those of hydraulic fracturing method.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.4
• /
• pp.100-106
• /
• 2005

Sugar beet stillages were used as a substrate for the production of single cell protein by the thermotolerant yeasts Candida rugosa, Kluyveromyces marxianus and C. utilis. The biomass production increased in accordance with the increase of pH-value, but protein content decreased. C. rugosa showed the highest crude protein production as 3.68g/l and C. utilis 2.9g/l, Kl. marxianus 2.30g/l, respectively. The rate of COD reduction in stillage versus crude protein production of C. rugosa showed the highest value as 0.35~0.39g/l as a good strain for single cell protein production using sugar beet stillages.

• Geotechnical Engineering
• /
• v.13 no.1
• /
• pp.137-146
• /
• 1997

In this study, a large consolidation test was carried out to estimate the consolidation behaviour of dredged clay ground improved by horizontal drain using plastic board drain with a vacuum pressure. The test results were analyzed by a numerical simulation using potential consolidation theory applied to a hollow cylinder. The rapid decreases in pore pressure and the drain speed in the plastic board indicate that the consolidation occurred quickly after the vacuum state was applied to the test soil. According to the numerical analysis obtained by applying the linear potential consolidation theory to a clay hollow cylinder with external radial drainage, the pore pressure is affected by the strain and the permeability of the soil rather than by the diffusion types. Therefore, measured surface settlement agreed with the numerical solution at the point where consolidation pressure increasing rate u: -0.5. Also the behaviour of the clay layer settlement in the place where the drain was installed was similar to that shown in Barron's consolidation theory. Finally, the design and construction procedure including the selection of the appropriate arrangement of horizontal drains were discussed based on the results of the laboratory tutsts. It is also shown that the potential consolidation theory make it possible to predict consolidation behaviour in the field using horizontal drains exactly.