• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.36-41
• /
• 2005

PCV(Positive Crankcase Ventilation) valve acts as a flow control valve to get a re-combustion of blow-by gas by having it flow from a crankcase to an inlet manifold suction tube. The blow-by gas of the crankcase should be eliminated or taken properly because it cause corrosion to critical parts, and contributes to increase crankcase pressure that can cause a drop in efficiency. The excessive stress and strain on the PCV valve that remove these harmful gas would be bring the difficult on the flow rate control and failure of the valve. Those condition inevitably induce the accident. Therefore, this study purpose is FEM evaluation of the stresses and deformation in the X3 PCV model according to the change of the differential pressure between inlet and outlet. From results, the maximum equivalent stresses increased linearly according to the increase of the differential pressure at the about 50mm from the inlet position and were under the yield strength of the valve. And the deformations were relatively small regardless of the in-outlet differential pressure variation.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.129-138
• /
• 2006

Using a strain-controlled rheometer, the steady shear flow properties of aqueous xanthan gum solutions of different concentrations were measured over a wide range of shear rates. In this article, both the shear rate and concentration dependencies of steady shear flow behavior are reported from the experimentally obtained data. The viscous behavior is quantitatively discussed using a well-known power law type flow equation with a special emphasis on its importance in industrial processing and actual usage. In addition, several inelastic-viscoplastic flow models including a yield stress parameter are employed to make a quantitative evaluation of the steady shear flow behavior, and then the applicability of these models is also examined in detail. Finally, the elastic nature is explained with a brief comment on its practical significance. Main results obtained from this study can be summarized as follows: (1) Concentrated xanthan gum solutions exhibit a finite magnitude of yield stress. This may come from the fact that a large number of hydrogen bonds in the helix structure result in a stable configuration that can show a resistance to flow. (2) Concentrated xanthan gum solutions show a marked non-Newtonian shear-thinning behavior which is well described by a power law flow equation and may be interpreted in terms of the conformational status of the polymer molecules under the influence of shear flow. This rheological feature enhances sensory qualities in food, pharmaceutical, and cosmetic products and guarantees a high degree of mix ability, pumpability, and pourability during their processing and/or actual use. (3) The Herschel-Bulkley, Mizrahi-Berk, and Heinz-Casson models are all applicable and have equivalent ability to describe the steady shear flow behavior of concentrated xanthan gum solutions, whereas both the Bingham and Casson models do not give a good applicability. (4) Concentrated xanthan gum solutions exhibit a quite important elastic flow behavior which acts as a significant factor for many industrial applications such as food, pharmaceutical, and cosmetic manufacturing processes.

• Mycobiology
• /
• v.46 no.3
• /
• pp.283-286
• /
• 2018

Fusarium graminearum causes the devastating plant disease Fusarium head blight and produces mycotoxins on small cultivated grains. To investigate the timeframe of F. graminearum infection during rice cultivation, a spore suspension of F. graminearum was applied to the rice cultivars Dongjin 1 and Nampyeongbyeo before and after the heading stage. The disease incidence rate was the highest (50%) directly after heading, when the greatest number of flowers were present, while only 10% of the rice infected 30 days after heading showed symptoms. To understand the mechanism of infection, an F. graminearum strain expressing green fluorescent protein (GFP) was inoculated, and the resulting infections were visually examined. Spores were found in all areas between the glume and inner seed, with the largest amount of GFP detected in the aleurone layer. When the inner part of the rice seed was infected, the pathogen was mainly observed in the embryo. These results suggest that F. graminearum migrates from the anthers to the ovaries and into the seeds during the flowering stage of rice. This study will contribute to uncovering the infection process of this pathogen in rice.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.4
• /
• pp.395-400
• /
• 1991

Effects of Various Chemical Substrates on Heat Resistance of Isolated EnterobTo pursue the various properties of Enterobacter sp. which may give an outbreak of food-borne disease to man, isolated from the meats and the small intestines of wild mice, and to offer the significant data in the fields of food hygiene and public health this study was carreied, 5 strains of Enterobacter sp. were isolated from the above samples. 5 strains isolated from sample sources were 1 strain (E. aerogenes) from the beeves, 2 strains (E. aerogenes, E intermedium) from the pork and 2 strains (E. aerogenes, E. cloacae) from the small intstines of wild mice. Of total isolatd 89 strains, including non-Enterobacter sp., these numbers of 5 isolates were showed as 5.6% of dection rate. On heating at temperature of $55^{\circ}C$ for 30min., these 5 stratins were generally more resisted in the 0.1M phosphate buffer when such chemical substrates as 0.1M glycine, 5% mannitol or 0.5% sorbitol was added to it whereas they were appeared weaker resistances in 0.1M phosphate buffer when 1% sodium citrate, 1% casein, 10% sodium chloride or 0.1M systein was infused into it.cter sp.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.5
• /
• pp.211-217
• /
• 2020

Earthquake preparedness has become more important with recent increase in the number of earthquakes in Korea, but many existing structures are not prepared for earthquakes. There are various types of liquefaction prevention method that can be applied, such as compaction, replacement, dewatering, and inhibition of shear strain. However, most of the liquefaction prevention methods are applied before construction, and it is important to find optimal methods that can be applied to existing structures and that have few effects on the environment, such as noise, vibration, and changes in underground water level. The purpose of this study is to estimate the correlation between the displacement of a structure and variations of pore water pressure on the ground in accordance with the depth of the sheet file when liquidation occurs. To achieve this, a shaking table test was performed for Joo-Mun-Jin standard sand and an earth pressure, accelerometer, pore water pressure transducer, and LVDT were installed in both the non-liquefiable layer and the liquefiable layer to measure the subsidence and excess pore water pressure in accordance with the time of each embedded depth. Then the results were analyzed. A comparison of the pore water pressure in accordance with Hsp/Hsl was shown to prevent lateral water flow at 1, 0.85 and confirmed that the pore water pressure increased. In addition, the relationship between Hsp/Hsl and subsidence was expressed as a trend line to calculate the expected settlement rate formula for the embedded depth ratio.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.10
• /
• pp.1359-1366
• /
• 2012

A strain of Streptomyces cavourensis subsp. cavourensis (coded as SY224) antagonistic to Colletotrichum gloeosporioides infecting pepper plants was isolated. SY224 produced lytic enzymes such as chitinase, ${\beta}$-1,3-glucanase, lipase, and protease in respective assays. To examine for antifungal activity, the treatments amended with the nonsterilized supernatant resulted in the highest growth inhibition rate of about 92.9% and 87.4% at concentrations of 30% and 10%, respectively. However, the sterilized treatments (autoclaved or chloroform treated) gave a lowered but significant inhibitory effect of about 63.4% and 62.6% for the 10% supernatant concentration, and 75.2% and 74.8% for the of 30% supernatant concentration in the PDA agar medium, respectively, indicative of the role of a non-protein, heat stable compound on the overall effect. This antifungal compound, which inhibited spore germination and altered hyphal morphology, was extracted by EtOAc and purified by ODS, silica gel, Sephadex LH-20 column, and HPLC, where an active fraction was confirmed to be 2-furancarboxaldehyde by GS-CI MS techniques. These results suggested that SY224 had a high potential in the biocontrol of anthracnose in pepper, mainly due to a combined effect of lytic enzymes and a non-protein, heat-stable antifungal compound, 2-furancarboxaldehyde.

• Advances in nano research
• /
• v.16 no.3
• /
• pp.231-249
• /
• 2024

When the amplitude of the vibrations is equivalent to that clearance, the vibrations for small amplitudes will really be significantly nonlinear. Nonlinearities will not be significant for amplitudes that are rather modest. Finally, nonlinearities will become crucial once again for big amplitudes. Therefore, the concrete panel system may experience a big amplitude in this work as a result of the high temperature. Based on the 3D modeling of the shell theory, the current work shows the influences of the von Kármán strain-displacement kinematic nonlinearity on the constitutive laws of the structure. The system's governing Equations in the nonlinear form are solved using Kronecker and Hadamard products, the discretization of Equations on the space domain, and Duffing-type Equations. Thermo-elasticity Equations. are used to represent the system's temperature. The harmonic solution technique for the displacement domain and the multiple-scale approach for the time domain are both covered in the section on solution procedures for solving nonlinear Equations. An effective data-driven solution is often utilized to predict how different systems would behave. The number of hidden layers and the learning rate are two hyperparameters for the network that are often chosen manually when required. Additionally, the data-driven method is offered for addressing the nonlinear vibration issue in order to reduce the computing cost of the current study. The conclusions of the present study may be validated by contrasting them with those of data-driven solutions and other published articles. The findings show that certain physical and geometrical characteristics have a significant effect on the existing concrete panel structure's susceptibility to temperature change and GPL weight fraction. For building construction industries, several useful recommendations for improving the thermo-mechanics' behavior of structural concrete panels are presented.

• Research in Plant Disease
• /
• v.30 no.3
• /
• pp.268-277
• /
• 2024

Erwinia pyrifoliae is a gram-negative bacterial pathogen that commonly causes black shoot blight in pear and apple tree. Although the pathogenicity of this bacterial species is very similar to E. amylovora, there is no specific explanation of its pathogenic genes and mechanisms. In this study, our investigation into E. pyrifoliae pathogenicity involved generating seven YKB12327 mutant strains using Tn5 transposon mutagenesis. Observations revealed weakened growth rate and loss of pathogenicity in these mutants. Whole-genome sequencing and alignment analysis identified transposon insertions within the coding sequences of five strains and in the intergenic region of two strains. Annotation analysis elucidated genes directly or indirectly associated with pathogenicity. Notably, mutant strain MT16 displayed a transposon insertion mutation in the cyclic-di-GMP phosphodiesterase (pdeF) gene, a key player in bacterial signaling, governing microbial behavior and adaptation to environmental changes. Our findings provide insights into the genetic regulation of E. pyrifoliae pathogenicity, suggesting potential avenues for further research aimed at understanding and controlling this bacterial pathogen by targeting pdeF to mitigate apple black shoot blight disease.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.726-733
• /
• 2002

Shrinkage strip or separation strip is a temporary joint that is left open for a certain time during construction to allow a significant part of the shrinkage to take place without inducing stress. A shrinkage stress analysis method of shrinkage strip in concrete slab of multi-story building considering the relaxation effect of creep and construction sequence is proposed. The analysis results of 10-story example building show that the effect of shrinkage strip can be analyzed easily by the proposed method. And shrinkage strip installed in a particular floor makes the stress of that floor reduced and the stress of the other floors increased a little. The rate and amount of stress reduced with closing time mainly depends on the development of shrinkage with time of concrete model used. The amount of stress reduced is determined by the amount of shrinkage strain developed before the closing of shrinkage strip.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.602-609
• /
• 2012

Burkholderia anthina R-4183, Burkholderia diffusa R-15930 and Burkholderia stabilis LMG 14294 isolated from green house soils (Gongju-Gun area, South Korea) were characterized and their phosphate solubilizing ability was assessed. Under in vitro culture conditions, all three species were proved to be effective in solubilizing phosphates in varying degrees. Strain Burkholderia anthina exhibited the highest phosphate solubilization in NBRIP medium ($665{\mu}g\;ml^{-1}$) followed by Burkholderia diffusa ($630{\mu}g\;ml^{-1}$) and Burkholderia stabilis ($578{\mu}g\;ml^{-1}$). However, solubilization of $FePO_4$ and $AlPO_4$ was found to be poor in all the strains. Acidification by means of gluconic and oxalic acids accumulation in the culture medium could be the possible mechanism responsible for phosphate solubilization. Glucose at the rate of 3% was found be the best carbon source for Burkholderia anthina while other two Burkholderia species showed maximum phosphate solubilization at 2% of glucose. In the case of nitrogen sources, ammonium and nitrate were equally effective in solubilizing phosphates by Burkholderia species. Despite a slight decrease in phosphate solubilization observed at increasing temperature, all three Burkholderia species could withstand a temperature of $30-35^{\circ}C$, pH at the range of 7-9 and the presence of NaCl (up to 2.5%) without much compromising the phosphate solubilization. As shown with potted mung bean seedlings, all the three isolates could enhance soil fertility and plant growth indicating their great potential to be used as bio-inoculants.