• Journal of Microbiology and Biotechnology
• /
• v.32 no.2
• /
• pp.238-247
• /
• 2022

Since the skin covers most surfaces of the body, it is susceptible to damage, which can be fatal depending on the degree of injury to the skin because it defends against external attack and protects internal structures. Various types of artificial skin are being studied for transplantation to repair damaged skin, and recently, the production of replaceable skin using three-dimensional (3D) bioprinting technology has also been investigated. In this study, skin tissue was produced using a 3D bioprinter with human skin cell lines and cells extracted from mouse skin, and the printing conditions were optimized. Gelatin was used as a bioink, and fibrinogen and alginate were used for tissue hardening after printing. Printed skin tissue maintained a survival rate of 90% or more when cultured for 14 days. Culture conditions were established using 8 mM calcium chloride treatment and the skin tissue was exposed to air to optimize epidermal cell differentiation. The skin tissue was cultured for 14 days after differentiation induction by this optimized culture method, and immunofluorescent staining was performed using epidermal cell differentiation markers to investigate whether the epidermal cells had differentiated. After differentiation, loricrin, which is normally found in terminally differentiated epidermal cells, was observed in the cells at the tip of the epidermal layer, and cytokeratin 14 was expressed in the lower cells of the epidermis layer. Collectively, this study may provide optimized conditions for bioprinting and keratinization for three-dimensional skin production.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1730-1738
• /
• 1994

Broadband code division multiple access(B-CDMA)previously proposed for personal communication services(PCS) is not suitable for high-speed data services with large variations in speed, because it is designed only for low-speed voice calls with small variations in speed. Meanwhile, hybrid intra-cell TDMA/inter-cell CDMA(Hybrid TDMA/CDMA) recently proposed could accomodate high-speed services easily because of its internal use of the TDMA scheme, but there would be much inefficiency in treating variable bit rate services due to the intrinsic properties of TDMA transmission scheme, In this paper, a media access control(MAC) protocol, called Resevation TDMA/CDMA, which uses a reservation scheme similar to the one in the packet reservation multiple access(PRMA) protocol to compensate for these shortcomings is proposed. In addition, the performance of this protocol is analyzed and compared with conventional protocols by computer simulation. According to the simulation results, it has been shown that the proposed Reservation TDMA/CDMA scheme could support various transmission rates of user data traffics easily, and it could utilize the variations of the treansmission rates in each active call more efficiently.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6060-6070
• /
• 2012

Real-Time Enterprise (RTE)'s key requirement is that it should respond and adapt fast to the change of the firms' internal and external situations including the change of market and customers' needs. Recently, the big data processing technology to support the speedy change of the firms is spotlighted. Under the circumstances that wire and wireless communication networks are evolving with an accelerated rate, it is especially critical to provide a strong security monitoring function and stable services through a real-time processing of massive communication data traffic. By applying the big data processing technology based on a cloud computing architecture, this paper solves the managerial problems of telecommunication service providers and discusses how to operate the network management system effectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.138-142
• /
• 2018

This study used HILS to test an expansion joint, which is vulnerable to the water hammer effect. The operation data for the HIL simulator was the length rate of the expansion joint by the water hammer, which was used for life prediction based on the vibration durability. For the vibration durability test, the internal pressure of the expansion joint was assumed to be a factor of the durability life, and the lifetime prediction model equation was obtained by curve fitting the lifetime data at each pressure. During the test, the major failure modes of crack and water leakage occurred on the surface of the bellows part. The lifetime prediction model typically follows an inverse power law model. The pressure is a stress factor, and the model is effective in only a specific environment. Therefore, another stress factor such as temperature will be added and considered for a mixed lifetime prediction model in the future.

• The Korean Journal of Mycology
• /
• v.48 no.4
• /
• pp.397-405
• /
• 2020

Beech mushroom (Hypsizygus marmoreus) is one of the most popular mushrooms in Japan, China, and Korea because of its delicious taste, nutritious value, and unique crunchy texture. In 2018-2019, unusual signs on the mushroom were observed in mushroom farms in Gyeongnam Province. The main signs were the inhibition of mycelial growth and primordial formation on the surface of mushroom media. When green mold caused contamination at early stage, the rate of pinhead formation by the mushroom greatly decreased to 46.5-71.5%. Conidia of the causal green mold were ellipsoidal, dark green, and measured 2.0-3.1㎛ long. The optimum temperature for mycelial growth of the green mold was 25℃. The phylogenetic tree obtained from the internal transcribed spacer (ITS) rDNA sequences showed that the isolated green mold corresponded to Penicillium brevicompactum (100.0%). This is the first report of green mold contamination caused by P. brevicompactum on H. marmoreus.

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.490-494
• /
• 2017

With increasing the number of vehicles, the accident rate also goes up and the damaged vehicles should be painted as a final repair process. At the painting stage the solvent-based paint causes environmental problems. To overcome these problems waterborne refinish paint is frequently used recently. However, for waterborne refinish, the costs of insurance coverage are too expensive, and insurance reimbursement costs could be burdensome. Because of the high price of aquatic paint treatment, the service shop might charge the malicious service price. In this study, the surfactant of Surfynol 104, which is the component in the paint, was used as an indicator whether the vehicle was painted with waterborne paint. The specimen was quantitatively analyzed to contain 0.38% of the surfactant through the standard addition method with isotope substituted internal standard (IS) of fluranthene-d10 by curie point pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS).

• Archives of Plastic Surgery
• /
• v.48 no.2
• /
• pp.165-174
• /
• 2021

Background In recent years, implant-based breast reconstruction has been performed because of its simplicity, short operation time, and rapid recovery of patients. Several studies have reported treatment methods for implant surgery-related infection, which is a serious complication. The aim of this study was to introduce our strategy for salvaging infected implants and to evaluate its effectiveness. Methods The authors performed a retrospective study of 145 cases from 132 patients who underwent implant-based breast reconstruction from January 2012 to December 2018. Empirical antibiotics were immediately administered to patients with suspected infections. The patients then underwent salvage treatment including appropriate antibiotics, ultrasonography-guided aspiration, debridement, antibiotic lavage, and implant exchange through a multidisciplinary approach. Patient demographics, operative data, duration until drain removal, adjuvant treatment, and complications were analyzed. Results The total infection rate was 5.5% (8/145). A longer indwelling catheter period and adjuvant treatment were significantly associated with infection. The salvage treatment showed a success rate of 87.5% (7/8). Seven patients who received early aggressive salvage treatment recovered from infection. One patient with methicillin-resistant Staphylococcus aureus, who received salvage treatment 11 days after symptom onset, did not respond to drainage and antibiotic treatment. That patient subsequently underwent explantation. Conclusions In implant-based breast reconstruction, prevention of infection is of the utmost importance. However, if an infection is suspected, proactive empirical antibiotic therapy and collaboration with the necessary departments are required. Through a multidisciplinary approach and proactive early management, swift and appropriate salvage should be performed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.533-537
• /
• 2013

Background: Malignant melanoma is a cancer that demonstrates rapid progression and atypical clinically features with a poor prognosis. Aim: This study was performed to determine the clinical characteristics and treatment outcomes of patients with malignant melanoma in Turkey. Methods: The medical records of 98 patients between 2007-2012 at our centers were retrieved from the patient registry. Overall survival (OS) was calculated using the Kaplan-Meier method. Results: In our study, with the median follow-up of all patients with cutaneous MM of 46.3 months, the median OS rate of all cases was 43.6 months and 5-year OS was 48.6%. However, five-year OS rates of patients with localized disease (stage I-II) and node involvement (stage III) were 60.3% and 39.6%, respectively. The median OS of stage IV patients was 8.7 months and 1-year OS rate was 26.2%. We showed that advanced stage, male gender, and advanced age in all patients with MM were significant prognostic factors of OS. Conclusions: Compared with the results of current studies from Western countries, we found similar findings concerning demographical features, histological variables and survival analyses for our patients with cutaneous MM in Turkey.

• Archives of Pharmacal Research
• /
• v.29 no.8
• /
• pp.712-719
• /
• 2006

In this study, we prepared core-shell type nanoparticles of a poly(DL-lactide-co-glycolide) (PLGA) grafted-dextran (DexLG) copolymer with varying graft ratio of PLGA. The synthesis of the DexLG copolymer was confirmed by $^1H$ nuclear magnetic resonance (NMR) spectroscopy. The DexLG copolymer was able to form nanoparticles in water by self-aggregating process, and their particle size was around $50\;nm{\sim}300\;nm$ according to the graft ratio of PLGA. Morphological observations using a transmission electron microscope (TEM) showed that the nanoparticles of the DexLG copolymer have uniformly spherical shapes. From fluorescence probe study using pyrene as a hydrophobic probe, critical association concentration (CAC) values determined from the fluorescence excitation spectra were increased as increase of DS of PLGA. $^1H-NMR$ spectroscopy using $D_2O$ and DMSO approved that DexLG nanoparticles have core-shell structure, i.e. hydrophobic block PLGA consisted inner-core as a drug-incorporating domain and dextran consisted as a hydrated outershell. Drug release rate from DexLG nano-particles became faster in the presence of dextranase in spite of the release rate not being significantly changed at high graft ratio of PLGA. Core-shell type nanoparticles of DexLG copolymer can be used as a colonic drug carrier. In conclusion, size, morphology, and molecular structure of DexLG nanoparticles are available to consider as an oral drug targeting nanoparticles.

• Journal of Korean Clinical Nursing Research
• /
• v.28 no.1
• /
• pp.13-22
• /
• 2022

Purpose: Extravasation of diagnostic and therapeutic materials might occur when the intravascular solution leaks into the surrounding tissues. Injury associated with extravasation depends on various factors. It may range from mild skin reaction to severe necrosis. However, the incidence rate for extravasation is largely unknown because of the limited reporting in Korea. Therefore, this study was conducted to identify the incidence of extravasation and nurses' attitude and knowledge of extravasation for providing high-quality nursing care. Methods: Three acute care hospitals were surveyed to estimate the occurrence of extravasation. Knowledge and attitude toward extravasation were investigated from 793 nurses working in six hospitals. Results: The incidence rate of extravasation was 0.5%. Extravasation commonly occurred in elderly patients aged 66 or older (59.9%) and internal medicine (48.2%), and it happened 13.73±20.68 days after hospitalization on average. It mostly occurred in the forearm site (52.9%) and was mainly caused by parenteral nutrition (33.6%). The mean scores of nurses' knowledge and attitude were 14.63±2.86 and 28.91±36.00, respectively. There was a significant negative correlation between the subjects' knowledge and attitude (r=-.11, p=.002). Conclusion: It is necessary to have a reporting system that can accurately monitor the occurrence of extravasation for patient safety management. In addition, it is necessary to develop a protocol that can be applied to clinical practice and a nurse education program.