• Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.90-96
• /
• 2005

The larvae of Palaemon gravieri were reared in the laboratory at three different temperature regimes ($15^{\circ}C,\;20^{\circ}C,\;and\;25^{\circ}C$) with the salinity ranges (28-32 psu) to understand how temperature and body size influence survival rate, and growth components (molt increment and intermolt period). The optimum temperature for the highest survival rate was $25^{\circ}C$. The intermolt periods consistently increased with an increase in size and instar number; however, the molt increments at successive instars generally decreased with an increase in size and instar number. The shortest intermolt period and the highest larval growth rate both occurred at $25^{\circ}C$. Thus, the optimum temperature for larval survival and growth rate was found to be $25^{\circ}C$ which was the temperature at which the larvae actually appear in nature.

• Journal of the Korea Institute of Building Construction
• /
• v.5 no.2 s.16
• /
• pp.161-166
• /
• 2005

This study is to evaluate on the increased cost of construction according to the depth change of concrete slabs in apartment building. When we increased the depth of concrete slab from 150mm to 180, 210mm, the qualitative and cost of construction were calculated by the high-rise type, the unit-size type. As a result of this study, in 32 Pyong type, increment of construction cost rate appeared by $5.1\%$ in case of increase from slab 150mm to 180mm, and $10.0\%$ in case of increase from slab 150mm to 210mm. In 45 Pyong type, Increment of construction cost rate appeared by $5.7\%$ in case of increase from slab 150mm to 180mm, and $10.2\%$ in case of increase from slab 150mm to 210mm. In 55 Pyong type, Increment of construction cost rate appeared by $2.4\%$ in case of increase from slab 150mm to 180mm, and $8.9\%$ in case of increase from slab 150mm to 210mm.

• The Korean Journal of Pharmacology
• /
• v.12 no.2 s.20
• /
• pp.21-32
• /
• 1976

The influence of Panax ginseng and Acanthopanax on the metabolism of hens are studied experimentally. The hens are fed with three dose levels of ethanol extract of Panax ginseng and Acanthopanax for 24 months and for comparing, there are control hens and young control hens. The results are as follows. 1. Hemoglobin, hematocrit and erythrocyte sedimentation rate values of hens fed with Panax ginseng and Acanthopanax are not significantly. different from control group. There is tendency of decreasing of erythrocyte sedimentation rate with aging. 2. The serum total lipid values of hens fed with Panax ginseng and Acanthopanax have tendency of increment compared with control group, especially in large dose treated hens of Panax ginseng and it is statistically significant. The serum cholesterol levels of all treated hens seem to be increased without significance statistically. Serum triglyceride level is higher in young hens compared with aged, and Panax ginseng and Acanthopanax treated hens reveal much higher values than control hens. So the increment of triglyceride levels in the Panax ginseng and Acanthopanax treated hens may be mainly contribute to increment of total lipid content. 3. Long-term administration of Panax ginseng and Acanthopanax seem to increase total serum protein content. Such increment seem to be due to the increment of globulin, especially gamma globulin, which is statistically significant in the large dose group of Acanthopanax. There are no differences of serum albumin levels of all the groups. 4. The blood glucose level and the glycogen content of liver and muscle have no difference among all the experimental groups. To summarize the results, the effects of Panax ginseng and Acanthopanax on the metabolism of hens have similarity in the majority of data of this experiment, and seem to be mainly influence to lipid and protein metabolisms by increasing serum triglyceride and globulin, especially gamma globulin.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.617-622
• /
• 2009

Purpose: Endoscopic transnasal correction of the blowout fractures has many advantages over other techniques. But after removal of packing material, there were some patients with recurrence of preoperative symptoms. Authors tried to make a quantitative anterograde analysis of orbital volume change over whole perioperative period which might be related with recurrence of preoperative symptoms. Methods: 10 patients with pure medial wall fracture(Group I) and 10 patients with medial wall fracture combined with fracture of orbital floor(Group II) were selected to evaluate the final orbital volume change, who took 3 CT scans, pre-, postoperative and 4 months after packing removal. By multiplying cross - section area of orbit in coronal view with section thickness, orbital volume were calculated. Then, mean orbital volume increment after trauma, mean orbital volume decrement after endoscopic correction and volume increment after packing removal were found out. And we tried to find correlations between type of fracture, initial correction rate and final correction rate. Results: The mean orbital volume increment of the fractured orbits were 7.23% in group I and 13.69% in group II. After endoscopic surgery, mean orbital volume decrement were 11.0% in group I and 12.46% in group II. Mean volume increment after packing removal showed 3.10% in group I and 6.50% in group II. The initial correction rate(%) showed linear correlation with final correction rate(%) after packing removal. And there were negative linear correlation between increment percentage of orbital volume by fracture and final correction rate(%). Conclusion: Orbital volume was proved to be increasing after removal of packing or foley catheter and it was dependent upon type of fracture. Overcorrection should be done to improve the final result of orbital blowout fracture especially when there are severe fracture is present.

• Korean Journal of Plant Resources
• /
• v.26 no.6
• /
• pp.709-717
• /
• 2013

The objective of this study was to examine the effect of root pruning intensity in combination with different initial seedling size on the growth of transplanting seedlings of Quercus acutissima. One-year-old seedlings were divided into three groups depending on their height, i.e. small (< 15 cm), medium (25-35 cm) and large size (35 cm <). Root of seedlings was pruned by three intensity such as, leaving 5 cm (severe), 10 cm (medium) and 15 cm (light) of taproot from the root-collar. After one year, we investigated survival rate, height and root-collar diameter (RCD) increment and final shoot dry weight. Also we measured characteristics of newly developed lateral roots such as number, total length, dry weight and diameter. Severe root pruning showed the lowest survival rate in all seedling size. Height increment, RCD increment and shoot dry weight were decreased with increasing intensity of root pruning. Seedlings of medium and light root pruning showed similar above-ground growth and dry weight of lateral roots. More large seedlings showed good survival rate, height increment and final shoot dry mass in all root pruning intensity. Therefore, one-year-old seedlings of Q. acutissima should be pruned taproot by 10 cm and transplanted to obtain excellent performance and increase the efficiency of transplanting work. Based on the findings of this study, it is important that applying to different root pruning intensity depending on initial seedling size for producing 2-year-old seedlings with excellent growth and high quality.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.4
• /
• pp.134-153
• /
• 1988

This paper was carried out to investigate the existence of a unique stress- strain behavior by obtaining some factors influencing the time dependent stress- strain behavior of clay. The results obtained from this study were summarized as follows ; 1. The relationship between stress ratro and strain in normally consolidated clay was in- dependent on pre-shear consolidation pressure. Therefore, shear strain could be expressed as a function with stress ratio. 2. The constitutive equation of shear strain on Modified Carn Clay Model coincided better with the observed value than Cam Clay Model. 3. The relationships between deviator stress and shear strain, between pore water pressure and shear strain were unified by the mean equivalent pressure. 4. The shear strain contour in norrnally consolidated clay was increased linearly through origin, but that in overconsolidated clay was not in accordance with the result of the former. 5. Because the effective stress path of normally consolidated clay was unified by the mean equivalent pressure, state boundary surface in (e,p,q) space was transformed into two dimensional surface. But it was considered to be suitable that the unified stress- strain in overconsolidated clay be expressed by a function with overconsolidation ratio. 6. The deviator for constant strain was increased linearly with increment of strain rate ($\varepsilon$) on semi-log scale, but pore water pressure was decreased. 7. The behavior of stress relaxation was transformed from linear to curvilinear with inc - rement of strain rate before stress relaxation test, and pore water pressure was increased in total range. 8. The strain of creep was increased linearly with increment of time on semi-log scale. The greater the strain rate before creep test became, the greater the increment of strain of creep became. And the pore water pressure during creep test was increased generally with increment of time on semi-log scale.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.6
• /
• pp.82-91
• /
• 2021

We compared the heat transfer characteristics of the parallel and the counterflow flow in the concentric double tube of the Al₂O₃/water nanofluids using numerical methods. The high- and low-temperature fluids flow through the inner circular tube and the annular tube, respectively. The heat transfer characteristics according to the flow direction were compared by changing the volume flow rate and the volume concentration of the nanoparticles. The results showed that the heat transfer rate and overall heat transfer coefficient improved compared to those of basic fluid with increasing the volume and flow rate of nanoparticles. When the inflow rate was small, the heat transfer performance of the counterflow was about 22% better than the parallel flow. As the inflow rate was increased, the parallel flow and the counterflow had similar heat transfer rates. In addition, the effectiveness of the counterflow increased from 10% to 22% rather than the parallel flow. However, we verified that the increment in the friction factor of the counterflow is not large compared to the increment in the heat transfer rate.

• KSTLE International Journal
• /
• v.1 no.1
• /
• pp.63-68
• /
• 2000

Angular contact ball bearings are mainly used in the spindle, which requires high speed and stiffness. The heat generation is studied by experiments and simulations using a pair of angular contact ball bearings. The temperature variation of inner and outer races and the temperature increment distribution are measured by using thermocouples for the rotational speed, preload, viscosity of lubricant. The measured values from experiments are used to estimate the heat conduction rate. The method of oil-air lubrication is used for the experiment. The amount of conduction heat transfer to the test spindle and the convection heat transfer coefficients long the spindle are computed by using inverse method with temperature increment distribution. Total heat generation rate is estimated with the heat partition rate which is calculated from temperatures of inner and outer races. In addition, the empirical factor of oil-air lubrication method for Palmgren's heat generation model is suggested. The empirical friction coefficients, which are obtained from the experiments, depend on the preload condition, and can give us more accurate estimation of the heat generation in ball bearings.

• Journal of Biomedical Engineering Research
• /
• v.28 no.1
• /
• pp.46-54
• /
• 2007

Objective: The first aim of this study is to determine the effects of acupuncture on the autonomic nervous system (ANS) via Heart Rate (HR) and Pupil Size (PS), and to compare the effects of acupuncture on the subjects' ANS when they are in a sitting position with the effects when they are in a supine position. Methods: Ten healthy male subjects were randomized to receive either verum acupuncture stimulation in a sitting position (SitV), verum acupuncture stimulation in a supine position (SupV), sham acupuncture stimulation in a sitting position (SitS), and sham acupuncture stimulation in a supine position (SupS). Acupuncture stimulation was applied to Neguan point (PC6) on the forearm. The subject's electrocardiogram (ECG) and pupil size were recorded continuously from 5 min before stimulation to 12 min after stimulation. Results: Verum and sham acupuncture stimulation were found to have reduced heart rate (p<0.01) and to have increased pupil size (p<0.01) in all the subjects. But when the reduction in HR and the increment in PS after verum acupuncture stimulation (both sitting and supine position) were compared with those after sham acupuncture stimulation, it was found that the reduction in HR (74.48 and 73.47 bpm, p<0.063) and the increment of PS (7.32 and, 6.10 mm, p<0.001) after verum acupuncture stimulation were greater than those after sham acupuncture stimulation, and that the corresponding values were statistically significant. In addition, at the baseline, it was found that the subjects had a larger PS and a faster HR in a sitting position than when they did so in a supine position. And then the reduction and increment ratio in the subject's HR and PS when they underwent acupuncture stimulation in a sitting position was significantly different from the reduction and increment in their HR and PS when they underwent the procedure in a supine position-i.e., the reduction ratio in HR was greater when they underwent the procedure in a sitting position, and such reduction ratio was statistically significant (p<0.05). As for the increment in PS, it was greater when the subjects underwent the procedure in a supine position, and such increment was significant (p<0.05). Conclusion: Manual acupuncture stimulation on Neguan point (PC6) has more significant influence on the autonomic nervous system rather than sham acupuncture (tactile stimulation). And the position-induced different states of ANS have different influence on the acupuncture effect.

• Journal of Korean Society of Forest Science
• /
• v.18 no.1
• /
• pp.9-12
• /
• 1973

Volume increment and estimation of future growth of pitch pine stand at age of 16 were analyzed based on the stand table method. The diameter growth survey was made by the Meyer's Increment Borer method which was based on the volume formular made on the single tree volume. The formular is V=0.000058D $^{1.6}{\times}H^{1.1}$ This survey was made based on the 95% reliability surveyed on the 339 trees in the 0.33ha of sample plot espicially set up. (1) Linear regression over annual diameter growth for the diameter is as follows; y=0.1618+0.0298x (2) Ninety percent of the total trees, in the diameter distribution of 2cm round off, each increased one step in diameter. (3) Stand volume increment percentage shows 16%. (4) The increment of stand volume for 5 years shows 46% of increment rate.