• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.3
• /
• pp.38-50
• /
• 1988

carried out to present a rheology model which is able to treat time-dependent properties of clay. The results were summarized as follow ; 1. The slope (a(e1)) of deviator stress in strain rate test was independent on axial strain, and pore water pressure was decreased with increment of strain rate. 2. The pore water pressure in a stress relaxation condition was not changed when the strain rate before stress relaxation was 0.05%/min., but it was increased with increment of time when the strain rate before stress relaxation was 0.2%/min 3. The greater the stress condition (q/qmax) and the strain rate before creep test became, the greater the increment rate of axial strain in creep test became. 4. SEKIGUCHI's constitutive equation was slightly overpredicted while empirical equation proposed in the study was well coincided with measured values. 5. The constitutive equation induced by a strain function could be dealed with a behavior of the pore water pressure increased with increment of elapsed time after primary consolidation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.5
• /
• pp.107-115
• /
• 2015

Residential building owners are turning toward renovating their existing buildings to improve old and inefficient HVAC systems. Due to the renovation, much of the added costs will inevitably be passed on to tenants by increasing rent rates. This increment often increases the vacancy rate in the buildings. To balance the interests of both owners and tenants, this paper suggested a method to determine an appropriate rental rate increment for the HVAC system renovation. A case study on residential buildings was conducted to determine a balanced point where the rental rate increment that offsets the amount tenants are willing to pay for the renovation. To calculate all costs incurred by the renovation, life-cycle cost analysis was carried out. Therefore, this paper ultimately provides a threshold value of rental rate increment such that building owners can make a reasonable decision on the HVAC system renovation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.349-352
• /
• 2006

The plastic deformation of polycrystalline materials is induced by changes of the microstructure when the loading is beyond the critical state of stress. Constitutive models for the crystal plasticity have the common objective which relates microscopic single crystals in the crystallographic texture to the macroscopic continuum point. In this paper, a new consistent tangent stiffness for the anisotropic elasto-viscoplastic analysis of polycrystalline deformation is developed, which can be used in the finite element analysis for the slip-dominated large deformation of polycrystalline materials. In order to calculate the consistent tangent stiffness, the state function is defined based on the consistency condition between the elastic and plastic stress. The rate of shearing increment($\Delta{\gamma}^{\alpha}$) is calculated with satisfying the consistency condition. The consistency condition becomes zero when the trial resolved shear stress($\tau^{{\alpha}^*}$) becomes resolved shear stress($\tau^{\alpha}$) at every step. Iterative method is utilized to calculate the rate of shearing increment based on the implicit backward Euler method. The consistent tangent stiffness can be formulated by differentiating the rate of shearing increment with total strain increment after the instant rate of shearing increment converges. The proposed tangent stiffness is applied to the ABAQUS/Standard by implementing in the ABAQUS/UMAT.

• Journal of Preventive Medicine and Public Health
• /
• v.44 no.3
• /
• pp.111-117
• /
• 2011

Objectives: This study measured the impact of shifts in maternal age and parity on the increase in the low birth weight (LBW) rate in Korea. Methods: We obtained raw data for all 6 397 945 live births registered at the Korea National Statistical Office between 1995 and 2005. We calculated the proportion of increment in the LBW rate due to changes in the distribution of maternal age and parity (AP-dis) and the proportion due to changes in the age- and parity-specific LBW rate (AP-spe). Results: The LBW rate increased from 3.02% in 1995 to 4.28% in 2005. The multiple birth rate increased from 1.32% to 2.19% during the same period. Of the 1.26% points increment in the LBW rate, 0.64% points occurred among singleton births and 0.62% points occurred among multiple births. Changes in the AP-dis accounted for 50% of the increase in the LBW rate among singleton births, but did not contribute to the increase in the LBW rate among multiple births. The remainder of the total increment in the LBW rate was explained by the increase in the AP-spe. Conclusions: This study demonstrated that shifts in maternal age and parity among singleton births and increased multiple births were important contributors to the increment in the LBW rate. This study also revealed that the increase in the AP-spe was an equally important contributor as the shifts in maternal age and parity to the increment in the LBW rate among singleton births and was a major contributor among multiple births.

• Journal of Environmental Science International
• /
• v.5 no.3
• /
• pp.337-346
• /
• 1996

The purpose of this study was to provide basic data of the growth characteristics of the landscape trees for better landscape planting design, construction and maintenance through the prediction of landscape change as time passes fly the analysis of survival rate, distribution patterns & increment percent of tree height, width, stem diameter (breast or surface) of widely used six tree species in Seongnam-si Eunhang-jugong apartment housing areas (8 years have passed after landsape alanting work). The main results can be summarized as followed. The tree survival rate of Pinus parviflora was the highest rate 89.2% than any other species, but Acer buergerianum showed the lowest survival rate at that of it 35.0%, & that of Picea abies 70.5 %, Metasequoia glyptostroboides 71.6%, Maknolia denudata 38.9%, Acer paimatum was 71.7%, As a whole, the tree survival rate of coniferous trees were relatively high. The tree height increment percent of the deciduous species wert relatively high. And that of Metasequoia glyptostroboides was the highest rate 11.61% than any other species, but that of Magnolia denudata was the lowest rate 5.59% than any other species. According to this results, the increment percent of trees in this apartment areas were comparatively lower than that of each related species planted in nursery area. And this results would be considered when landscape experts do landscape planting design, construction & maintenance. The distribution patterns of present tree size showed a Normal Distribution like any other biological features.

• Electrical & Electronic Materials
• /
• v.9 no.2
• /
• pp.188-195
• /
• 1996

The AlSi etching process using the MERIE type reactor carried out with different process parameters such as C1$_{2}$ and N$_{2}$ gas flow rate, RF power and chamber pressure. The etching characteristics were evaluated in terms of etch rate, selectivity, uniformity and etched profile. As the N2 gas flow rate is increased, the AlSi etch rate is decreased and uniformity has remained constant within .+-.5%. The etch rate is increased and uniformity is decreased, according to increment of the C1$_{2}$ gas flow rate, RF power and chamber pressure. Selective etching of TEOS with respect to AlSi is decreased as the RF power is increased while it is increased by increment of the C1$_{2}$ gas flow rate and chamber pressure, on the other hand, selective etching of photoresist with respect to AlSi is increased by increment of the C1$_{2}$ gas flow rate and chamber pressure, it is decreased as the N$_{2}$ gas flow rate is increased.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.1
• /
• pp.51-59
• /
• 2013

This study, through the domestic literature research and the success stories of restaurant business, derived the success factors, the impact of these factors on the management performance was carried out through a survey for the establishment of Foodservice Business empirical research. First, according to the result that analyze effect that founder special quality factor gets in management result, was expose that a social technology causes effect that keep in mind in net profit growth rate and customer rate of increment and result that establishment readiness keeps in mind in net profit growth rate, customer rate of increment and seat turnover rate was confirmed. Second, in operation management factor accessibility in customer rate of increment and seat turnover rate, facilities in seat turnover rate, service capacity in net profit growth rate and customer rate of increment and seat turnover rate, promotion activity was confirmed that keep in mind each in customer rate of increment. Third, the effect that quality directivity gets in management result in occasion of establishment restaurant business in goods factor was confirmed that do not keep in mind statistically. Therefore, this study, by presenting the factors for establishment of restaurant business, may contribute to the success strategy establishment of the establishment restaurant business preparator and existing restaurant businessmen.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.329-344
• /
• 1987

This paper described the behavior under repeated loading in triaxial compression test on clay. The experiment was conducted to investigate the influence of controlled various over-consolidation ratio and compaction energy, on the stress-strain behavior of clays. 1. The difference of deviator stress during repeated loading was greatly appeared at large strain. And pore water pressure was decreased at initial of unloading, but it was increased again before long. 2. The recoverable elastic strain (${{\Delta}{\varepsilon}e}$) and the slope of un-reloading were decreased with the increment of over-consolidation ratio (OCR). 3. The recoverable elastic strain (${{\Delta}{\varepsilon}e}$) was increased with the increment of strain rate but it was decreased with the increment of strain in strain rate tests. The slope of un-reloading (Eur) tends to increase with the increment of strain rate and it was decreased with the increment of strain. 4. The recoverable elastic strain was greatly increased with the increment of compaction energy and it slightly tends to decrease with the increment of strain on various compaction energy. The slope of un-reloading was not appeared markedly with increment of compaction energy but it tends to decrease with the increment of strain generally.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.2
• /
• pp.237-253
• /
• 2005

In Korea, the volume of insurance industry has been increased rapidly with helping the economic growth, the increment of GNP and derive of public welfare policy. But the other side of the volume increment, the life insurers have some problems, such as the high rate of turnover, lapses and surrenders, in processing of acquiring more insurance contracts. The object of this paper is the analysis of the causes and properties of the high rate of turnover, lapses and surrenders using statistical survival model. Also we hope that the insurers will use the results of analysis to reduce the rates.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.84-95
• /
• 1990

The objective of this study is to understand the effect of measurement-related investment. That is, this study aims at verifying the correlation between the measurement-related investment and inferiority rate of products by statistical analysis. The samples of this study are 376 industrial companies in Korea, and the research data was analysed on inferiority state of industrial companies with a measurement standard laboratory. The analysis was made by the elementary statistics, the correlation analysis and the regression analysis. The results are summarized as follows : First, the inferioriy rate of the industrial companies with a measurement standard laboratory was relatively lower than that of the other companies without the laboratory by statistical significance. Second, the increment on measurement-related investment had a negative correlation with the increment of inferiority rate, and the increase of measurement-related investment showed decrease of the inferiority rate by regression analysis.