• Journal of Navigation and Port Research
• /
• v.43 no.2
• /
• pp.134-141
• /
• 2019

The objective of this study was to establish whether global macroeconomic indicators affect the profitability of Korean shipping companies by using panel regression analysis. OROA (operating return on assets) and ROA (ratio of net profit to assets) were selected as proxy variables for profitability. OROA and ROA were used as dependent variables. The world GDP growth rate, interest rate, exchange rate, stock index, bunker price, freight, demand and supply of the world shipping market were set as independent variables. The size of the firm was added to the control variable. For small-sized firms, OROA was not affect by macroeconomic indicators. However, ROA was affected by variables such as interest rates, bunker prices, and size of firms. For medium-sized firms, OROA was affected by demand, supply, GDP, freight, and asset variables. However, macroeconomic indicators did not affect ROA. For large-sized firms, freight, GDP, and stock index (SCI; Shanghai Composite Index) have an effect on OROA. ROA was analyzed to be influenced by bunker price and SCI.

• Coupled systems mechanics
• /
• v.7 no.6
• /
• pp.669-690
• /
• 2018

This paper deals with numerical modeling of dynamic failure phenomena in rate-sensitive brittle and/or ductile materials. To this end, a two-dimensional continuum viscodamage-embedded discontinuity model, which is based on our previous work (see Do et al. 2017), is developed. More specifically, the pre-peak nonlinear and rate-sensitive hardening response of the material behavior, representing the fracture-process zone creation, is described by a rate-dependent continuum damage model. Meanwhile, an embedded displacement discontinuity model is used to formulate the post-peak response, involving the macro-crack creation accompanied by exponential softening. The numerical implementation in the context of the finite element method exploiting the second-order mid-point scheme is discussed in detail. In order to show the performance of the model several numerical examples are included.

• Coupled systems mechanics
• /
• v.13 no.2
• /
• pp.153-170
• /
• 2024

The problem considered in this theoretical paper is the delamination of a multilayered inhomogeneous beam structure that has viscoelastic behaviour under angle of twist, horizontal and vertical displacements which vary smoothly with time according to prescribed laws. The cross-section of the beam is a rectangle. The layers are made of different materials which are smoothly inhomogeneous along the length of the beam. The beam under consideration represents statically undetermined structure since it is clamped in its two ends. The problem of the strain energy release rate is solved. For this purpose, the strain energy stored in the beam structure is analyzed. In order to verify the solution obtained, the strain energy release rate is found also analyzing the time-dependent compliances of the beam under prescribed angle of twist and displacements. A parametric investigation is carried-out by applying the solution obtained. Special attention is paid to the effect of the parameters which control the variation of the angle of twist and the displacements with time on the strain energy release rate.

• Journal of Surface Science and Engineering
• /
• v.57 no.3
• /
• pp.155-164
• /
• 2024

Physical properties of carbon nanomaterials are dependent on their nanostructures and they are modified by diverse synthesis methods. Among them, thermal plasma method stands out for synthesizing carbon nanomaterials by controlling chemical and physical reactions through various design and operating conditions such as plasma torch type, plasma gas composition, power capacity, raw material injection rate, quenching rate, kinds of precursors, and so on. The method enables the production of carbon nanomaterials with various nanostructures and characteristics. The high-energy integration at high-temperature region thermal plasma to the precursor is possible to completely vaporize precursors, and the vaporized materials are rapidly condensed to the nanomaterials due to the rapid quenching rate by sharp temperature gradient. The synthesized nanomaterials are averagely in several nanometers to 100 nm scale. Especially, the thermal plasma was validated to synthesize low-dimensional carbon nanomaterials, carbon nanotubes and graphene, which hold immense promise for future applications.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.133-134
• /
• 2009

Cold temperature development (CTD) of electron beam (EB) patterned resists and subsequent dry etching were investigated for fabrication of nano-patterned Niobium (Nb). Bulky Nb fims on GaAs substrates were deposited with EB evaporation. Line patterns on Nb cathode were fabricated by EB patterning and reactive ion etching (RIE). Size deviations of nano-sized line patterns from CAD designed patterns are dependent on the EB total exposure, but it can be improved by CTD of EB-exposed resist. Line patterns of 10 to 300 nm widths of EB-exposed resist patterns were drawn under various exposure conditions of $0.2{\mu}s$/dot (total 240,000 dot) with a constant current (50 pA). Compared with room temperature development (RTD), the CTD improves pattern resolution due to the suppression of backscattering effect. RIE with $CF_4$ was performed for formation of several nano-sized line patterns on Nb. Each EB-resist patterned samples with RTDs and CTDs were etched with two different $CF_4$ gas pressures of 5 Pa. Nb etching rate increases while GaAs (or ZEP) etching rate decreases as the chamber pressure increases. This different dependent of the etching rate on the $CF_4$ pressure between Nb and GaAs (or ZEP) has a significant meaning because selective etching of nano-sized Nb line patterns is possible without etching of the underlying active layer.

• Transactions of Materials Processing
• /
• v.20 no.3
• /
• pp.257-264
• /
• 2011

Multilayer(clad) sheets, composed of two or more materials with different properties, are fabricated using the roll-bonding process. A good formability is an essential property for a multilayered sheet in order to manufacture parts by plastic deformation. In this study, the influences of temperature and strain rate on the plastic properties of stainless steel-aluminum-magnesium multilayered(STS-Al-Mg) sheets were investigated. Tensile tests were performed at various temperatures and strain rates on the multilayered sheet and on each separate layer. Fracture of the multilayered sheet was observed to be temperature-dependent. At the base temperature of $200^{\circ}C$, all materials fractured simultaneously. At lower temperatures, the Mg alloy sheet fractured earlier than the other materials. Conversely, the other materials fractured earlier than the Mg alloy sheet at higher temperatures. The uniform and total elongations of the multilayered sheet were observed to be higher than that of each material at a temperature of $250^{\circ}C$. Larger uniform elongations were obtained for higher strain rates at constant temperature. The same trend was observed for the Mg alloy sheet, which exhibited the lowest elongation among the three materials. The tensile strengths and elongations of the single layer sheets were compared to those of the multilayer material. The strength of the multilayered sheet was successfully calculated by the rule of mixture from the values of each single layer. However, no simple correlation between the elongation of each layer and that of the multilayer was obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3963-3970
• /
• 2009

This study proposes a method to evaluate the level of 'soft-hard' of color quantitatively by evaluating the shape with edge sharpness automatically and by evaluating color in the color image scale in a drawing in art therapy using a computer. The dependent variable is the rank for the color experts to rate the level of 'soft-hard'. The mean and standard deviation of Value(V), and Chroma(C), colors, main color, clusters, length of edge, and sharp line rate of edge are considered as the independent variable. The appropriate independent variables to explain the dependent variable are selected through the step wise regression analysis. The inter-rater reliability of two raters is checked and the validity of developed system is verified by the rank correlations coefficient between the ranks of rater's and system's. This system can be used to evaluate of the shape or color in a drawing objectively and quantitatively for art therapy assessment, and to give the useful information to the fashion, textile, interior industry as well as color psychology and art therapy.

• Geomechanics and Engineering
• /
• v.11 no.4
• /
• pp.531-552
• /
• 2016

The greenschist in the Jinping II Hydropower Station in southwest China exhibits continuous creep behaviour because of the geological conditions in the region. This phenomenon illustrates the time-dependent deformation and progressive damage that occurs after excavation. In this study, the responses of greenschist to stress over time were determined in a series of laboratory tests on samples collected from the access tunnel walls at the construction site. The results showed that the greenschist presented time-dependent behaviour under long-term loading. The samples generally experienced two stages: transient creep and steady creep, but no accelerating creep. The periods of transient creep and steady creep increased with increasing stress levels. The long-term strength of the greenschist was identified based on the variation of creep strain and creep rate. The ratio of long-term strength to conventional strength was around 80% and did not vary much with confining pressures. A quantitative method for predicting the failure period of greenschist, based on analysis of the stress-strain curve, is presented and implemented. At a confining pressure of 40 MPa, greenschist was predicted to fail in 5000 days under a stress of 290 MPa and to fail in 85 days under the stress of 320 MPa, indicating that the long-term strength identified by the creep rate and creep strain is a reliable estimate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.389-393
• /
• 1999

The exact model of impact ionization events in which has influence on device efficiency, is to be necessary element for device simulation. Recently, a modified Keldysh formula with two set of power exponent of 7.8 and 5.6 is used to simulate carrier transport. This model is, however, not suitable as impact ionization model in low energy range since this ignore direction dependent properties of impact ionization. The impact ionization rate is highly anisotropic at low energy, while it becomes isotropic at higher energy range. Note that impact ionization events frequently occur in high energy range. For calculating impart ionization rate, we use full energy band structure derived from Fermi's golden rule and empirical pseudopotential method. We compare with calculated and experimental value, and investigate direction dependent conduction energy band structure along the direction of <100>, <110> and <111>. We know that the threshold energy of impact ionization is anisotropic and impact ionization rate is very deviated from modified Keldish formula, in relatively low energy range.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.5
• /
• pp.410-414
• /
• 2004

To understand the postharvest characteristics of soybean sprouts, 5-day-old sprouts were harvested, packed in PE film, and stored at 4, 12, and $20^{\circ}C$ for up to 4 days. In addition, the sprout respiration rate was measured after storage at 4, 8, 12, 16, 20, and $24^{\circ}C$ for up to 20h. During the first day of storage at $20^{\circ}C$, the sprouts maintained temperature-dependent longitudinal growth, especially of hypocotyl length; hypocotyl and root grew 0.8cm and 0.2cm, respectively. The hypocotyl thickness decreased by 11, 13, and $18\%$ after 4 days of storage at 4, 12, and $20^{\circ}C$, respectively. No temperature-dependent differences in fresh weight, dry weight, or water content were found, despite decreases of $3\%$ over the 4 days of storage. A significant postharvest decrease of $50\%$ in vitamin C content was observed in the sprouts stored at $20^{\circ}C$ for 3days. Based on the $CO_2$ production rate, the soybean sprouts exhibited an increase in respiration in proportion to the storage temperature; sprouts stored at 8, 12, 16, 20 and $24^{\circ}C$ showed approximately 2, 5, 6, 11, and 17 times, respectively, than the respiration rate of sprouts stored at $4^{\circ}C$. These results indicate the importance of low temperature storage during market circulation for minimizing the postharvest morphological and nutritional degradation of soybean sprouts.