• Nutritional Sciences
• /
• v.9 no.1
• /
• pp.9-13
• /
• 2006

The differential effects of various fatty acids such as n-3 and n-6 types or degrees of unsaturation on the CYP2E1 induction and the production of lipid peroxidation (LPO) were investigated. The CYP2E1-transduced human hepatoma HepG2 cells (E47) were cultured in RPMI 1640 media containing different concentrations of various fatty acids up to 48 h incubation compared to 04 cells and CYP2E1-null cells. Treated fatty acids were linoleic acid (LA:n-6, C18:2), arachidonic acid (AA:n-6, C20:4) and docosahexaenoic acid (DHA:n-3, C22:6). The cell survival rate was decreased corresponding to the degree of unsaturation (LA>AA $\cong$DHA) and to LPO production in E47 and 04 cells. The four or five unsaturation degree of fatty acids, AA and DHA, caused time- and dose-dependent cell death in E47 cells but not as much as in C34 (without CYP2E1), suggesting an important role of CYP2E1 in the DHA mediated damage. In the levels of lipid peroxides (LPO), AA also elevated LPO by 3- and 5- fold compared to DHA or LA treated E47 cells. However, AA did not increase LPO until 48 h incubation in C34 cells. In conclusion, the polyunsaturated fatty acids induced CYP2E1 induction might be changed by the elevated levels of lipid peroxide (LPO) and oxidative stress through the connection of CYP2E1 and degrees of unsaturated fatty acids.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.50-57
• /
• 1989

Tapered etching of polysilicon films has been achieved by implanting phosphorus ions into the polysilicon film and using plasma etch in either $CF_4-O_2\;or\;SF_6$. A two-step plasma etching method is also proposed to control the taper angle of the etched edge without changing the implantion conditions. The taper angle is determined by the ratio of the etch rate of the undamaged region to that of the damaged top region of the polysilicon layer. The ratio is found to be dependent on the implantion dose, the implantion energy and the anisotropy of etching. The minimum angle in our experiments is about $10^{\circ}$. When the two-step etching method is employed, the taper angles can be controlled from the minimum angle up to about $55^{\circ}$.

• International Journal of Oral Biology
• /
• v.33 no.3
• /
• pp.97-103
• /
• 2008

The present study investigated the role of peripheral group I, II, and III metabotropic glutamate receptors (mGluRs) in mustard oil (MO)-induced nociceptive response in the masseter muscles of lightly anesthetized rats. Experiments were carried out on male Sprague-Dawley rats weighing 300-350 gm. After initial anesthesia with sodium pentobarbital (40 mg/kg, i.p.), one femoral vein was cannulated and connected to an infusion pump for intravenous infusion of sodium pentobarbital. The rate of infusion was adjusted to provide a constant level of anesthesia. MO (30 ${\mu}L$) was injected into the mid-region of the left masseter muscle via a 30-gauge needle over 10 seconds. After 30 mL injection of 5, 10, 15, or 20% MO into the masseter muscle, total number of hindpaw-shaking behavior was monitored. Intramuscular administration of MO significantly produced hindpawshaking behavior in a dose-dependent manner, as compared with the vehicle (mineral oil)-treated group. Intramuscular pretreatment with 10 or 100 ng DHPG, a group I mGluRs agonist, enhanced MO-induced hindpaw-shaking behavior, while APDC (20 or 200 ${\mu}g$), a group II mGluRs agonist, or L-AP4 (2 ${\mu}g$), a group III mGluRs agonist, significantly reduced MO-induced nociceptive behavior. The antinociception, produced by group II or III mGluRs agonists, was abolished by pretreatment with LY341495, a group II mGluRs antagonist, or CPPG, a group III mGluRs antagonist, res-pectively. Based on these observations, peripheral mGluRs differentially modulated MO-induced nociceptive behavior response in the craniofacial muscle pain and peripheral group II and III mGluRs agonists could be used in treatment of craniofacial muscle nociception.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.2
• /
• pp.395-400
• /
• 2015

Both Japan and Korea provide population-based screening programs. However, screening rates are much higher in Korea than in Japan. To clarify the possible factors explaining the differences between these two countries, we analyzed the current status of the cancer screening and background healthcare systems. Population-based cancer screening in Korea is coordinated well with social health insurance under a unified insurer system. In Japan, there are over 3,000 insurers and coordinating a comprehensive strategy for cancer screening promotion has been very difficult. The public healthcare system also has influence over cancer screening. In Korea, public healthcare does not cover a wide range of services. Almost free cancer screening and subsidization for medical cost for cancers detected in population-screening provides high incentive to participation. In Japan, on the other hand, a larger coverage of medical services, low co-payment, and a lenient medical audit enables people to have cancer screening under public health insurance as well as the broad range of cancer screening. The implementation of evidence-based cancer screening programs may be largely dependent on the background healthcare system. It is important to understand the impacts of each healthcare system as a whole and to match the characteristics of a particular health system when designing an efficient cancer screening system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.48-59
• /
• 2017

In this study, an analysis of the thermo-fluid dynamic and missile-motion performance was carried out through a numerical simulation inside the missile canister. Calculation was made in an analytical volume using dynamic grid and evaporated water was used as a coolant. To analyze the interaction among the hot gas, coolant, and mixture flow, Realizable $k-{\varepsilon}$ turbulence and VOF (Volume Of Fluid) model were chosen and a parametric study was performed with the change of coolant flow rate. As a result of the analysis, pressure of the canister showed a large difference depending on the presence or absence of the coolant, and also showed a dependancy on the amount of coolant. Velocity and acceleration were dependent on the canister pressure.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.2
• /
• pp.27-36
• /
• 2010

It is well known that the shear strength of an RC column subjected to a lateral force decreases with the increase of the displacement ductility of column. This decreasing rate of shear strength is quite dependent on the initial shear strength. Therefore, the evaluation of the initial shear strength is important to predict the shear strength with reasonable accuracy. The shear behavior is complex because many parameters, such as the sectional shape, aspect ratio, axial force, longitudinal bars and ductility, are mutually interactive. In this study, the initial shear strength has been investigated by experiments varying parameters such as the aspect ratios, void ratios, ratio of longitudinal bars and sectional types. A new empirical equation for the initial shear strength, considering the ratio of the longitudinal bars, has been proposed and its validity has been assessed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.28-33
• /
• 2009

In the research of speech recognition, locating the beginning and end of a speech utterance in a background of noise is of great importance. The conventional methods for speech endpoint detection are based on two simple time-domain measurements-short-time energy, and short-time zero-crossing rate, which couldn't guarantee the precise results if in the low signal-to-noise ratio environments. This paper proposes a novel approach that finds the Lyapunov exponent of time-domain waveform. This proposed method has no use for obtaining the frequency-domain parameters for endpoint detection process, e.g. Mel-Scale Features, which have been introduced in other paper. Accordingly, this algorithm is low complexity and suitable for Digital Isolated Word Recognition System.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.21-25
• /
• 2008

In this study, to maximize RF performance of MOSFETs, $f_T$ and $f_{max}$ dependent data on $W_u$ are measured and newly analyzed by extracting small-signal model parameters. From the physical analysis results, it is found that a peak value of $f_T$ is generated by $W_u$-independent parasitic gate-bulk capacitance at narrow $W_u$ and the wide width effect of reducing the increasing rate of transconductance at wide $W_u$. In addition, it is revealed that a maximum value of $f_{max}$ is caused by the non-quasi-static effect that the gate resistance is greatly reduced at narrow $W_u$ and becomes constant at wide $W_u$.

• Advances in Traditional Medicine
• /
• v.4 no.3
• /
• pp.171-178
• /
• 2004

Ginseng radix, the root of Panax ginseng C. A. Meyer (Araliaceae), is a medicinal plant used world-widely and has been reported to have various biological effects. To investigate the effects of Ginseng radix on HL-60 cell apoptosis, MTT assay, DNA fragmentation assay and flow cytometry were performed on HL-60 cells. Cells were treated with Ginseng radix at different concentrations $(10^{-4},\;10^{-3}\;and\;10^{-2};\;dilution\;rate)$. Ginseng radix significantly induced cells apoptosis with a time- and dose-dependent manner. To determine whether Ginseng radix-induced apoptosis is due to increase of tumor necrosis factor $(TNF-{\alpha})$ secretion, enzyme-linked immunosorbent assay was performed on HL-60 cells. Unexpectedly, Ginseng radix $(96\;{\pm}\;5\;pg/ml)$ significantly decreased the $TNF-{\alpha}$ secretion compared with control $(174\;{\pm}\;14\;pg/ml)$. Furthermore, Ginseng radix with $rIFN-{\gamma}$ synergistically increased nitric oxide production in mouse peritoneal macrophages. Taken together, our data indicate that Ginseng radix induce apoptosis on HL-60 cells without increase of $TNF-{\alpha}$ secretion and could be used for a supplementary remedy of cancer.

• Journal of Hydrogen and New Energy
• /
• v.7 no.1
• /
• pp.11-18
• /
• 1996

The Laves phase alloy hydrides have some promising properties as electrode materials in reversible metal hydride batteries. In this work, the hydrogen storage performance, crystallographic parameters, surface morphology, surface area and electrochemical characteristics of the non-stoichiometric $ZrMn_{0.3}V_{0.7}Ni_{1.4+{\alpha}}$, $ZrMn_{0.5}V_{0.5}Ni_{1.4+{\alpha}}$($\alpha$ =0.0, 0.2, 0.4, 0.6) alloys were examined. These as-cast alloys were found to have mainly a cubic C15-type Laves phase structure by X -ray diffraction analysis. The equilibrium pressure of the alloy were increased as $\alpha$ increased in both two types alloy. In case of $ZrMn_{0.5}V_{0.5}Ni_{1.4+{\alpha}}$ alloys, discharge efficiency and the rate capability of the alloy were decreased as $\alpha$ increased but, these values were increased in case of $ZrMn_{0.3}V_{0.7}Ni_{1.4+{\alpha}}$ alloys. The differences of these electrode properties observed were dependent on the reaction surface area and the catalytic activity of unit area of the each electrode.