• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.596-599
• /
• 2004

The robotic $CO_2$ welding is a manufacturing process to produce high quality joints for metal and it could provide a capability of full automation to enhance productivity. Despite the widespread use in the various manufacturing industries, the full automation of the robotic $CO_2$ welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this research, an attempt has been made to develop an intelligent algorithm to predict the weld geometry (top-bead width, top-bead height, back-bead width and back-bead height) as a function of key process parameters in the robotic $CO_2$welding. To achieve this above objective, Taguchi method was employed using five different process parameters (tip gap, gas flow rate, welding speed, arc current, welding voltage) as a guide for optimization of process parameters.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.14 no.1
• /
• pp.209-225
• /
• 2001

Recently many efforts were focused to understand the mechanical insights of melanogenesis to develop the agents for hyper-pigmentation and hypo-pigmentation. In the melanin biosynthetic pathway, tyrosinase is the rate limiting enzyme, and ${\alpha}$-melanocyte stimulating hormone(MSH) or cAMP-elevating agents stimulate melanogenesis and enhance the melanin synthesis and the tyrosinase activity. The author has analyzed the effects of Radix Trichosanthis on the basal melanogenic activities of B16/F10 mouse melanoma cells, and on the ${\alpha}$-MSH or forskolin-induced melanogenesis. Radix Trichosanthis alone markedly suppressed melanin content and tyrosinase activity in a dose-dependent manner. Pretreatment of the cells with Radix Trichosanthis also suppressed the increase of ${\alpha}$-MSH (10 nM) or forskolin (20${\mu}M$)-induced melanin content and tyrosinase activity. The decrease in the tyrosinase activity was paralled by a decrease in the abundance of tyrosinase protein and tyrosinase promoter activity. Pretreatment of the cells with Radix Trichosanthis also inhibited the increase of forskolin($20{\mu}M$) induced the amount of tyrosinase protein and tyrosinase promoter activity. The results of DOPA staining revealed that pretreatment of the cells with Radix Trichosanthis showed less intensity than B16 melanoma cells stimulated with ${\alpha}$- MSH or forskolin. These results suggest that Radix Trichosanthis inhibits melanogenesis and abrogates ${\alpha}-MSH and cAMP-induced melanogenesis in B16 melanoma cells.

• The Korean Journal of Zoology
• /
• v.27 no.3
• /
• pp.127-136
• /
• 1984

The specification of dorsal/ventral axis in the egg of Xenopus laevis was investigated as a series of oblique orientation to gravity by tilt and clinostat. The results are as follows. (1) If the eggs were oriented, in the early period after fertilization, to novel gravity by $15^\\circ, 30^\\circ, 45^\\circ$ and $60^\\circ$ tilt until gastrula stage, the site of involution was usually formed in the OpG side (the side opposing gravity). As the degree of tilt was raised from $15^\\circ to 60^\\circ$, the rate of relocation of the involution site was proportionally increased. (2) When UV-irradiated eggs were tilted period to first cleavage by $15^\\circ, 30^\\circ, 45^\\circ$ and $6\^\\circ$, the effect of UV syndrome was rescued, and the extent of rescue was propotional to the tilt degree. (3) The fertile eggs were loaded on the clinostats of several speeds. In the range of low speeds between $0.45 \\sim 9.0$ rph, the location of dorsal lip was dependent on the direction of rotation, and in $40 \\sim 360$ rph, lip was formed at a random position. In addition, some of the tadpoles experienced with clinostat showed the typical syndrome of "dorsal axis reduction". The above results were discussed regarding the mechanism of the establishment of dorsal/ventral palarity. palarity.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.4
• /
• pp.40-49
• /
• 1994

In this paper, we propose methods for improving the performance of word recognition system. The ray stratey of the first method is to apply the inertia to the feature vector sequences of speech signal to stabilize the transitions between VQ cdoes. The second method is generating the new observation probabilities using the transition matrix of VQ codes as weights at the observation probability of the output symbol, so as to take into account the time relation between neighboring frames in DHMM. By applying the inertia to the feature vector sequences, we can reduce the overlapping of probability distribution of the response paths for each word and stabilize state transitions in the HMM. By using the transition matrix of VQ codes as weights in conventional DHMM. we can divide the probability distribution of feature vectors more and more, and restrict the feature distribution to a suitable region so that the performance of recognition system can improve. To evaluate the performance of the proposed methods, we carried out experiments for 50 DDD area names. As a result, the proposed methods improved the recognition rate by $4.2\%$ in the speaker-dependent test and $12.45\%$ in the speaker-independent test, respectively, compared with the conventional DHMM.

• The Korean Journal of Ecology
• /
• v.15 no.2
• /
• pp.103-115
• /
• 1992

This dissertation, which has been prepared in the region of cheju(33o31'N, 126o32'E) from may,1987 to appril, 1989, is to elucidate the dominant characteristics of early stages in secondary succession, by examining the life history of erigeron annuus for the seeding depth of a seed was dependent upon the degree of shading. That is, on the area of ocm,the more tense the shading was, the more germination percentage was increased, while, in the case of 1.5cm, it was somewhat increased, when shading bwcame ess and less tense. The rosette of e. annuus, through its relative light intensity was decreased by shading, up to 5% of natural light, showed some strong shade tolerance, which had no difficulty in matter production. The species diversity of mixed-species community was the highest in the middle of April, the lowest in the last of may. The dominance index was the highest in the late may, the lowest in the middle of April. Toward the end of may, the occupation rate of dominance species was the highest. There was a neutral relationship between intraspecific and interspecific, owing to the differentiation of its niche, temporally and spatially. Productive structure of the community revealed a narrow leaf type which was concentratively distributed in the mid part of community height. The relative light intensity of community ground surface was 6.1%, the leaf inclination 60o,the extinction coefficient(k) 0.4, biomass of community 1,045.6 g.d.w./m2,T/Rratio 9.3, C/Frate 7.0 and sumgermanition, shade toarance and community characteristics on erigeron annuus l.in chejumed leaf area index 3.88. through the various life cycles o e.annuus, we can say that it decreases mortality of seeding caused by some stress and disturbance, for germination lasts for a long time at any opportunity available, and it promotes population growth. The strong shade tolerance of a rosette and the variableness of a life from differentiate the niche between intraspecific and interspecific within the community, and avoid the direct competition between them, thus poromoting community growth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4284-4293
• /
• 2012

At the early construction project stage, the most important task is to estimate planned construction costs analyzed with detailed information. Therefore, in this study, Apartment Housing Projects at the Early Stage of Civil Construction Cost of the reasonable and accurate predictions of the Regression analysis to 170 of actual Construction Cost, and dependent variable regression to Civil Construction Cost, location based national land area based on a combination of private land, union land, public land to the use of predictive models by various analyses of the ease and accuracy. As a result, Civil Construction Cost of Apartment Housing Projects by the regression formula for the error rate estimates in national land predictive model 15.59%, private land predictive model 17.53%, union land predictive model 21.86%, public land predictive model 13.08%.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.3
• /
• pp.173-184
• /
• 2005

A capillary action-induced tension develops in the tear layer between the contact lens and cornea, which leads to the restoring force due to difference in the layer thickness between either upper and lower or left and right side of the lens when it is displaced off the equilibrium position as a result of blinking. Suppose the lens was displaced a certain distance from the equilibrium position, lens starts to oscillate toward the equilibrium position with the decreasing amplitude due to the restoring force as well as the velocity dependent viscous damping force in the tear layer. A mathematical model which consists of the differential equations and their numerical solution was proposed to analyze the damped oscillations of lenses. The model predicts the time dependence of lenses after the blink varying the various parameters such as Be, diameters, masses and positions displaced from equilibrium. As the Be and mass of lens increases the rate of amplitude reduction decreases, which requires a more time for the lens to return to the equilibrium position. It seems that varying the lens' displacement and diameters affect the lens' motion very little.

• Journal of computational fluids engineering
• /
• v.17 no.4
• /
• pp.41-48
• /
• 2012

A numerical analysis of thermal stratification in the upper plenum of the MONJU fast breeder reactor was performed. Calculations were performed for a 1/6 simplified model of the MONJU reactor using the commercial code, CFX-13. To better resolve the geometrically complex upper core structure of the MONJU reactor, the porous media approach was adopted for the simulation. First, a steady state solution was obtained and the transient solutions were then obtained for the turbine trip test conducted in December 1995. The time dependent inlet conditions for the mass flow rate and temperature were provided by JAEA. Good agreement with the experimental data was observed for steady state solution. The numerical solution of the transient analysis shows the formation of thermal stratification within the upper plenum of the reactor vessel during the turbine trip test. The temporal variations of temperature were predicted accurately by the present method in the initial rapid coastdown period (~300 seconds). However, transient numerical solutions show a faster thermal mixing than that observed in the experiment after the initial coastdown period. A nearly homogenization of the temperature field in the upper plenum is predicted after about 900 seconds, which is a much shorter-term thermal stratification than the experimental data indicates. This discrepancy is due to the shortcoming of the turbulence models available in the CFX-13 code for a natural convection flow with thermal stratification.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1443-1453
• /
• 2010

We simulated the roughing train of the rod mill of SEAH BESTEEL Inc. using finite element method to inhibit surface cracks initiation on workpiece. We designed 2nd pass (square roll) and applied to this roll in the roughing train of the rod mill. Also, we proposed new pass schedule, which changed roll gap of 3rd and 4th groove by using finite element method. We used shear damage model, which is dependent on shear stress ratio and compared the number of damaged elements on workpiece. A damaged element means surface crack. Consequently, after 2nd pass (square roll) is changed, the error rate decreased by 1.43% when compare to that of the old groove. And the number of damaged elements in the new pass schedule decreased by 37.6%, which is less than present pass schedule.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.495-501
• /
• 2013

This paper describes a flexible wireless telemetering system using a mesoscale cantilever sensor, which is microfabricated with a patterned thin Ni-Cu foil on a resin substrate. The dynamic validation of the sensor has been conducted in a flow. The wireless telemetry is used to obtain data regarding the oscillating flows. It is shown that the sensor is nearly independent of the environmental temperature and is suitable for application to primary healthcare and diagnostic devices. It can be easily integrated with other modules for measuring physiological parameters, e.g., blood pressure, oxygen saturation, and heart rate, to increase the convenience and reliability of diagnosis. The precision and reliability of the sensor are also dependent on the design of the analog front-end and noise reduction techniques. It is shown that the present system's minimum interval between packet transmissions is ~16 ms.