• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2686-2697
• /
• 1994

When a railway train enters a tunnel at high speed, a compression wave is formed in front of the train and propagates along the tunnel. The compression wave subsequently emerges from the exit of the tunnel, which causes an impulsive noise. In order to estimate the magnitudes of the noises and to effectively minimize them, the characteristics of the compression wave propagating in a tunnel must be understood. In the present paper, the experimental and analytical investigations on the attenuation and distortion of the propagating compression waves were carried out using a model tunnel. This facility is a kind of open-ended shock tube with a fast-opening gate valve instead of a general diaphragm. One-dimensional flow model employed in the present study could appropriately predict the strength of the compression wave, Mach number and flow velocity induced by the compression wave. The experimental results show that the strength of a compression wave decreases with the distance from the tunnel entrance. The decreasing rate of the wave strength and pressure gradient in the wave is strongly dependent on the strength of the initial compression wave at the tunnel entrance.

• Journal of Mechanical Science and Technology
• /
• v.14 no.7
• /
• pp.752-763
• /
• 2000

The stress field around the dynamically propagating interface crack tip under a remote mixed mode loading condition has been studied with the aid of dynamic photoelastic method. The variation of stress field around the dynamic interface crack tip is photographed by using the Cranz-Shardin type camera having $10^6$ fps rate. The dynamically propagating crack velocities and the shapes of isochromatic fringe loops are characterized for varying mixed load conditions in double cantilever beam (DCB) specimens. The dynamic interface crack tip complex stress intensity factors, $K_1\;and\;K_2$, determined by a hybrid-experimental method are found to increase as the load mixture ratio of y/x (vertical/horizontal) values. Furthermore, it is found that the dynamically propagating interface crack velocities are highly dependent upon the varying mixed mode loading conditions and that the velocities are significantly small compared to those under the mode I impact loading conditions obtained by Shukla (Singh & Shukla, 1996a, b) and Rosakis (Rosakis et al., 1998) in the USA.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.267-274
• /
• 2010

Recently, the magnetorheological (MR) polishing process has been examined as a new ultra-precision polishing technology for mirror surface generation in many applications, such as aspheric lenses, biochips, micro parts, etc. This method uses MR fluids which contains micro abrasives as a polishing media, and can. It is possible to obtain nano level surface roughness under suitable process conditions, however, required polishing time is highly dependent on the applied pre-polishing methods due to its very small material removal rate. Thus, in this study, a combined polishing method is presented to reduce total polishing time for SUS304. First, the electropolishing (EP) method was applied to obtain fine surface roughness, and the MR polishing was followed. Surface roughness variations were investigated according to the process conditions. As the results of this study, it was possible to reduce total polishing time for SUS304 using the proposed combined polishing method.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.1
• /
• pp.130-134
• /
• 2015

The automobile industry is ubiquitous and involved in the handling of metal, machines, electricity, electron, and chemistry including the products of many types of processes. In the process of installing engines as a part of the car assembly line, the measurement and correction of the position of the stud bolts consumes a great deal of time. Additionally, defective parts must be manually removed. In the process of engine installation, the speed of the operation, related to the economics of vehicle assembly, is dependent upon measuring the precise position of the stud bolt, reducing the length of correction time, and increasing the working rate. This paper deals with securing the economic feasibility of the manufacturing process, increasing the safety by removing risk factors in the working area, and improving and equalizing the quality by developing an automatic system for the process involving a stud bolt.

• Computers and Concrete
• /
• v.21 no.4
• /
• pp.399-406
• /
• 2018

The present study focuses on the performance of basalt fiber reinforced concrete (BFRC) lining in tunnel situated in sandstone rock when subjected to internal blast loading. The blast analysis of the lined tunnel is carried out using the three-dimensional (3-D) nonlinear finite element (FE) method. The stress-strain response of the sandstone rock is simulated using a crushable plasticity model which can simulate the brittle behavior of rock and that of BFRC lining is analyzed using a damaged plasticity model for concrete capturing damage response. The strain rate dependent material properties of BFRC are collected from the literature and that of rock are taken from the authors' previous work using split Hopkinson pressure bar (SHPB). The constitutive model performance is validated through the FE simulation of SHPB test and the comparison of simulation results with the experimental data. Further, blast loading in the tunnel is simulated for 10 kg and 50 kg Trinitrotoluene (TNT) charge weights using the equivalent pressure-time curves obtained through hydrocode simulations. The analysis results are studied for the stress and displacement response of rock and tunnel lining. Blast performance of BFRC lining is compared with that of plain concrete (PC) and steel fiber reinforced concrete (SFRC) lining materials. It is observed that the BFRC lining exhibits almost 65% lesser displacement as compared to PC and 30% lesser displacement as compared to SFRC tunnel linings.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.171-178
• /
• 2006

Value prediction of instruction issue width in superscalar processor is a technique to obtain performance gains by supplying earlier source values of its data dependent instructions using predicted value of a instruction. In this paper, the mean performance improvement by predictor as well as prediction accuracy and prediction rate are moaned and assessed by comparison and analysis of value predictor that instruction issue width(4,8,16) in parallel and run by predicting value, which is for performance improvements of ILP[4]. The experiment result show the superiority hight performance of 8-issue.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.329-340
• /
• 2020

This study investigates the effect of capital structure on the financial performance of pharmaceutical enterprises which are listing on Vietnam's stock market. The study builds the regression using ROE as dependent variable and four independent variables, including self-financing, financial leverage, long-term asset and debt to assets ratios. In addition, we use other variables as controlling ones, such as firm size, fixed asset rate and growth. We collect data for the period from 2015 to 2019 of all 30 pharmaceutical enterprises which are currently listing on Vietnam's stock market. The least square regression (OLS) is used to test the effect of capital structure to the firms' financial performance. The analysis results show that the financial leverage ratio (LR), long-term asset ratio (LAR) and debt-to-assets ratio (DR) have positive relationship with firm performance, meanwhile the self-financing (E/C) affects negatively to the return on equity (ROE). Upon the findings we suggest that the Vietnamese government should focus on stabilizing macro environment to create favorable environment for enterprises. And the pharmaceutical enterprises should build more reasonable capital structure with higher debt proportion than equity, diversifying loan mobilization channels such as issuing long-term bonds. Additionally, the firms should expand the scale appropriately to maintain development and ability to pay debts.

• Journal of Nutrition and Health
• /
• v.32 no.4
• /
• pp.376-383
• /
• 1999

The effects of $\beta$-carotene substitutionl for vitamin A and the chronic consumption of ethanol of ethanol on hepatic folate metabolism were studied it rats. The substitution of $\beta$-carotene for vitamin A depressed hepatic 10-formyl-tetreahydrofolate dehydrogenase(10-formyl-tetrahydrofolate : NADP oxidoreductase, E.C. 1.5. 1.6)activity to 65% of controls(p<0.001) and enhanced hepatic 5, 10-methy-lenetetrahydrofolate reductase(E. C. 6.3.3.2)activity by 56% with respect to control levels(p<0.001). Hepatic activity of 10-formyltertrahydrofolate dehydrogenase was depressed to about half that of control levels by ethanol administration to rats(36% ethanol diet, p<0.001). The activity of 5, 10-methyleneterahydrofolate reductase was not changed by ethanol consumption. The increased activity of 5, 10-methyleneterahydrofolate reductase and the decreased activity of 10-formyltetrahydrofolate dehydrogenase appeared to decrease the level of nonmethyl folate conezyme and the rate of one-carbon metabolism. Plasma homocysteine concentrations were significantly higher in rats fed ethanol(p<0.01) o $\beta$-carotene(p<0.001) than in controls, which suggests that increased activity of 5, 10-methylenetetrahydrofolate reductase can depress homocysteine metabolism. We concluded that dietary substitution of $\beta$-carotene for vitamin A or chronic administration of ethanol resulted in changes in the activity of hepatic folate-dependent enzymes, which could affect the distribution of folate derivatives, plasma homocysteine levels and one-carbon metabolism.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.97-103
• /
• 2001

The speaker recognition method using DTW algorithm has the problem that is reducing the performance of the speaker recognition system as the time variation. So there are many proposed algorithms to solve these problems. This paper proposes the new method If make the reference pattern that is acceptable to intra-speaker variation by reference pattern normalization. And to avoid reducing performance of speaker recognition system, we use the modified reference pattern to recognize the system user. The used methods in this paper are VQ and DTW. As the result of simulation we can obtain the $97.5\%$ of recognition accuracy rate.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.45-50
• /
• 2000

This paper proposes a delta energy method based on Parameter Filtering(PF), which is a speech segmentation algorithm for text dependent speaker verification system over telephone line. Our parametric filter bank adopts a variable bandwidth along with a fixed center frequency. Comparing with other methods, the proposed method turns out very robust to channel noise and background noise. Using this method, we segment an utterance into consecutive subword units, and make models using each subword nit. In terms of EER, the speaker verification system based on whole word model represents 6.1%, whereas the speaker verification system based on subword model represents 4.0%, improving about 2% in EER.