• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.4
• /
• pp.551-560
• /
• 2014

Twenty-four male 1-year old swamp buffaloes (Bubalus bubalis) were randomly allocated to 4 groups. One group grazed on guinea grass (GG) and another on guinea grass and the legume Stylosanthes guianensis (GL). The other two groups were kept in pens and fed freshly cut guinea grass and concentrate at an amount of 1.5% (GC1.5) and 2.0% (GC2.0) of body weight, respectively. The effect of the different feeding intensities on carcass characteristics and meat quality were assessed. The mean body weight at slaughter was 398 (${\pm}16$) kg. Average daily gain was higher in concentrate-supplemented groups (570 and 540 g/d in GC1.5 and GC2.0, respectively) when compared to GG (316 g/d) and GL (354 g/d) (p<0.01). Likewise, the warm carcass weight was higher in GC1.5 and GC2.0 compared to GG and GL. Dressing percentage was 48.1% and 49.5% in GC1.5 and GC2.0 in comparison to 42.9% and 44.8% observed in GG and GL, respectively. Meat of Longissimus throracis from GC1.5 and GC2.0 was redder in color (p<0.01), while water holding capacity (drip and thawing loss) was improved in pasture-fed groups (p<0.05). Protein and fat content of Longissimus thoracis was higher in animals supplemented with concentrate (p<0.01), as was cholesterol content (p<0.05), whereas PUFA:SFA ratio was higher and n-6/n-3 ratio lower (p<0.01) in pasture-fed buffaloes. Results of the present study showed that the supplementation of pasture with concentrate enhances the growth and carcass characteristics of swamp buffaloes expressed in superior dressing percentage, better muscling, and redder meat with a higher content of protein and fat, whereas animals grazing only on pasture had a more favorable fatty acid profile and water holding capacity. In conclusion, the supplementation of concentrate at a rate of about 1.5% of body weight is recommended to improve the performance and carcass quality of buffaloes.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.112-117
• /
• 2017

Ion exchange fiber, PADD was synthesized by the reaction between PAN based acrylic fiber and DETA with $AlCl_3{\cdot}6H_2O$, and was analyzed by FT-IR and SEM to investigate its characteristics. The experimental results of Cr(VI) removal by PADD were better fitted with Langmuir adsorption isotherm, and the maximum uptake value ($Q_{max}$) was calculated to be 6.93 mmol/g. The kinetic data can be well described by Lagergen pseudo-second order rate model. The Cr(VI) adsorption capacity of PADD was 4.11 mmol/g at pH 2, which shows the effect of pH changes on the removal of Cr(VI). The adsorption selectivity of Cr(VI) was higher than phosphate and As(V). Total ion exchange capacity of PADD was 4.70 mmol/g, which was measured by acid-base back titration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.2
• /
• pp.187-202
• /
• 1976

Experiment were conducted to study the photosynthetic ability of several rice varieties and the influence of the drymatter production on the yield components of the rice plant, especially in ripening period. The photosynthetic ability at the ripening period, the varieties were classified into two groups as relatively high capacity and low capacity. With the earlier the transplanting date and the higher the N-content leaf blade, the greater the ratio of reserved assimilates befere heading time to the ear. This could be support the fact that the rate of full-ripened grains or grain yield of 'Tongil' variety may increased by the change of environment condition.condition.

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.241-250
• /
• 2007

In case of retrofitting a concrete structure subjected to blast load by using retrofit materials such as FRP (fiber-reinforced polymer), appropriate ductility as well as raising stiffness must be obtained. But the previous approximate and simplified models, which have been generally used in the design and analysis of structures subjected to blast load, cannot accurately consider effects on retrofit materials. Problems on the accuracy and reliability of analysis results have also been pointed out. In addition, as the response of concrete and reinforcement on dynamic load is different from that on static load, it is not appropriate to use material properties defined in the previous static or quasi-static conditions to in calculating the response on the blast load. In this study, therefore, an accurate HFPB (high fidelity physics based) finite element analysis technique, which includes material models considering strength increase, and strain rate effect on blast load with very fast loading velocity, has been suggested using LS-DYNA, an explicit analysis program. Through the suggested analysis technique, the behavior on the blast load of retrofitted concrete walls using CFRP (carbon fiber-reinforced polymer) and GFRP (glass fiber-reinforced polymer) have been analyzed, and the retrofit capacity analysis has also been carried out by comparing with the analysis results of a wall without retrofit. As a result of the analysis, the retrofit capacity showing an approximate $26{\sim}28%$ reduction of maximum deflection, according to the retrofit, was confirmed, and it is judged ate suggested analysis technique can be effectively applicable in evaluating effectiveness of retrofit materials and techniques.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.5
• /
• pp.382-390
• /
• 2018

Background: The plant Aster koraiensis has long been used as an ingredient in folk medicine. It has been reported that Aster koraiensis extract (AKE) prevents the progression of diabetes-induced retinopathy and nephropathy. However, although these beneficial effects of AKE on diabetes complications have been identified, the antidiabetic effects of AKE have not yet been completely investigated and quantified. In the present study, the glucose-lowering and antioxidant effects of aqueous and ethanolic AKEs were evaluated. Methods and Results: The glucose-lowering effects of aqueous and ethanolic (30%-, 50%-, and 80%-ethanol) AKEs were investigated via ${\alpha}$-glucosidase inhibitory assays. The mode of inhibition by AKEs on ${\alpha}$-glucosidase was identified through kinetic analysis. The total antioxidant capacity of each of the 4 AKEs was evaluated by assessing their conversion rate of $Cu^{2+}$ to $Cu^+$. The content of chlorogenic acid and 3,5-di-O-caffeoylquinic acid, the bioactive compounds in AKE, in each extract were analyzed by high performance liquid chromatography (HPLC). The AKEs showed potent ${\alpha}$-glucosidase inhibitory activity with mixed inhibition mode, and significant antioxidant capacity. Conclusions: These results of this study suggested that the AKEs tested had ${\alpha}$-glucosidase inhibitory and antioxidant effects. Among the extracts, the 80% ethanol extract showed the most significant ${\alpha}$-glucosidase inhibitory activity, with a half maximal inhibitory concentration ($IC_{50}$ value) of $1.65{\pm}0.36mg/m{\ell}$ and a half maximal effective concentration ($EC_{50}$ value) for its antioxidant activity of $0.42{\pm}0.10mg/m{\ell}$. It can therefore be used as a source of therapeutic agents to treat diabetes patients.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.718-724
• /
• 2018

In this study, the $Ni_{0.9}Co_{0.05}Ti_{0.05}(OH)_2$ precursor was prepared by the concentration gradient co-precipitation method. In order to overcome the structural change due to oxygen desorption in the cathode active material with high nickel content, the physical and electrochemical analysis of the cathode active material according to the calcination temperature were investigated. Physical properties of $Li_{1.05}Ni_{0.9}Co_{0.05}Ti_{0.05}O_2$ were analyzed by FE-SEM, XRD and TGA. The electrochemical performance of the coin cell using a cathode active material and $LiPF_6$(EC:EMC=1:2 vol%) electrolyte was evaluated by the initial charge/discharge efficiency, cycle retention, and rate capabilities. As a result, the initial capacity and initial efficiency of cathode materials were excellent with 244.5~247.9 mAh/g and 84.2~85.8% at the calcination temperature range of $750{\sim}760^{\circ}C$. Also, the capacity retention exhibited high stability of 97.8~99.1% after 50cycles.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.285-291
• /
• 2015

Exposure to cold sea water can be life-threatening to the drowned individual. Although appropriate life jacket can be usually be provided for the buoyance at the drowning accident, heat loss can make the drowned individual experience the hypothermia. Inflatable life jackets filled with inflatable air pocket can increase the thermal protection as well as the buoyancy force. Because it is important to know how the human body behaves unde the different life jacket, present study compares the thermal insulation capacity of solid type life jacket with that of inflatable life jacket. In order to represent the insulation capacity of life jacket, thermal resistance is estimated based on the assumption of steady-state. Also, a transient three-dimensional thermal distribution of the thigh is analyzed by using finite element method implementing the Pennes bioheat equation. The finite element model is a segmental, multi-layered representation of the body section which considers the heat conduction within tissue, bone, fat and local blood flow rate.

• Journal of Energy Engineering
• /
• v.25 no.2
• /
• pp.94-100
• /
• 2016

ESS(Energy Storage System) is an important source that keeps power supply stable and utilizes electricity efficiently. For example, ESS contributes to resolve power supply imbalance, stabilize new renewable energy output and regulate frequency. ESS is predicted to be expanded to 55.9GWh of installed capacity by 2023, which is 30 times more than that of 2014. To raise competitiveness of domestic ESS industry in this increasing world market, we have disseminated load-shift ESS for continuous power supply imbalance with FR ESS, and also necessity to secure domestic track record is required. However in case of FR ESS, utility of installing thermal power plant is generally generated within 5% range of rated capacity, so that scalability of domestic market is low without dramatic increase of thermal power plant. Necessity of load-shift ESS dissemination is also decreasing effected by surplus backup power securement policy, raising demand for new dissemination model. New dissemination model is promising for $CO_2$ reduction effect in spite of intermittent output. By stabilizing new renewable energy output in connection with new renewable energy, and regulating system input timing of new renewable energy generation rate, it is prospected model for 'post-2020' regime and energy industry. This research presents a policy alternatives of REC multiplier calculation method to induce investment after outlining PV-connected ESS charge/discharge mode to reduce GHG emission, This alternative is projected to utilize GHG emission reduction methodology for 'Post-2020' regime, big issue of new energy policy.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.169-178
• /
• 1996

Target parameters such as water solubility index (WSI), intrinsic viscosity (IV), water holding capacity (WHC), oil holding capacity (OHC), soluble dietary fiber (SDF) and microstructure were investigated on three different screw configurations during twin-screw extrusion of wheat bran. WSI of raw wheat bran (RWB) was 13.7%, while that of extrudates ranged $16.3{\sim}23.2%$ when extruded using screw configurations with 5 reverse screw elements (RSE). It was found that the moisture content of RWB greatly affected WSI of extrudates. IV of wheat bran extrudates increased from 10.6 ml/g of RWB to $37.86{\sim}44.37\;ml/g$ of extrudates extruded using 3, 4 and 5 RSE, whose trend was highly related to the moisture content of RWB and the extrusion pressure. Multiplication of IV and soluble solid (SS) content exhibited good correlation $(R^2=0.85)$ with specific mechanical energy (SME). The results suggested that SS and molecular size are an important factor governed by the SME in solubilization of wheat bran. WHC increased with increasing feed rate and moisture content, while OHC decreased. SDF increased from 2.68% of RWB to $4.32{\sim}6.48%$ of extruded wheat bran, indicating the significant breakdown of cell wall components. Microstructure of the extrudates showed the distinct patterns of degradation and solubilization of cell wall structure, depending on the moisture content of RWB.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.5
• /
• pp.1-9
• /
• 2024

With the emergence of various next-generation wireless networks, the traditional store and forward(SF) method at network nodes has faced limitations in efficiently utilizing network capacity. To overcome these limitations, various network coding techniques based on the decode and forward(DF) method have been proposed. However, these techniques have primarily focused on traffic environments with asymmetric packet lengths between relay nodes, limiting their applicability when different modulation and coding schemes(MCS) are applied to relay nodes. This paper proposes a relay network coding scheme that supports high frequency efficiency while simultaneously enabling bidirectional relaying using DF, considering asymmetric MCS traffic that reflects different transmission data and wireless channel conditions between individual nodes for efficient utilization of wireless network capacity. Additionally, this paper demonstrates the possibility of cooperative communication at the relay and examines the effect of increased communication distance. Subsequently, computer simulations are conducted to verify the performance gains of the proposed technique in terms of network coding for each source node with asymmetric information lengths. This proposed technique shows additional bit error rate(BER) performance gains by adopting an incremental redundancy(IR) scheme that follows network coding, even in mobile node environments where direct link transmission between source nodes is possible.