• Journal of Biomedical Engineering Research
• /
• v.39 no.2
• /
• pp.87-93
• /
• 2018

The measurement of Heart Rate Variability (HRV) using electrocardiogram (ECG) signals has been used to predict fatigue and stress levels in a clinical environment, yet, owing to the complexity of such ECG systems, a domestic, nonclinical monitoring of HRV has not been a practical possibility. Recently though, Pulse Rate Variability (PRV) has been studied as an alternative to HRV. In this study, we investigated the reliability of measuring PRV by means of a smartwatch. The PRV results were compared to HRV results in similar test conditions, i.e. those obtained under rapid and deep-breathing scenarios. From the results obtained, it transpires that the Bland-Altman ratio and cross-correlation coefficients between several PRV and HRV parameters were highly correlated, thus suggesting that the results of measuring PRV using a smartwatch can be used to predict HRV in nonclinical environments.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.1
• /
• pp.49-58
• /
• 2014

Variability factors of transship cargo in the container transportation market analysis short term factors. In the past, studies on the factor of variability in container cargo volume have focused on long term volume forecast and increase in investment and competitiveness from strategic perspectives. Unlike previous studies, this paper analyzes factors of variability in transshipment volume rapidly varying in short term and seeks measures. Since it was identified that transshipment volume depends on vessel operation cost and port volume in long term but effectively on special strategies launched by port authorities in short term, the port authority experienced rapid drop in volume should continue to observe strategies of competition ports and to make use of strategies seeking appropriate countermeasures.

• Journal of Korean Traditional Oncology
• /
• v.26 no.1
• /
• pp.29-37
• /
• 2021

Objectives: The purpose of this study is to examine whether heart rate variability (HRV) and pulse wave of cancer patients can be used as indicators of their health status and prognosis. Methods: We retrospectively compared HRV, pulse wave and body mass index (BMI) of cancer patients and healthy individuals who visited W hospital from November of 2020 to October of 2021. Results: As a result of comparing HRV and pulse wave parameters between cancer patients and healthy subjects, among HRV indices, mean heart rate (MHR), standard deviation of normal to normal (SDNN) and total power (TP), very low frequency (VLF) showed significant differences between two groups. Cancer patients' pulse wave parameters showed more rapid and superficial than that of healthy subjects. Also, cancer patients weighed less and had lower BMI. Conclusion: For increased MHR, decreased SDNN, rapid and superficial pulse wave can be indicators of poor prognosis of cancer patients, keep monitoring HRV and pulse wave can help to manage patients efficiently.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.259-259
• /
• 1996

Circumstellar peculiarities of the young Herbig Ae/Be stars are analyzed using high-resolution CCD spectroscopic data, obtained in 1991-1996 at the ESO and the Crimean Astrophysical Observatory (about 450 spectrograms). The results of investigation of the rapid line variability in H$\alpha$, H$\beta$, HeI 5876 and DNaI lines are presented for AB Am, HD 163296, HD 36112, HD 100546, and HD 50138. We conclude that the behaviour of these lines can be explained in the framework of the model containing an equatorially concentrated and azimuthally inhomogeneous stellar wind, and an external cool shell that occasionally looses matter in form of infall onto the star.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.3
• /
• pp.177-183
• /
• 2016

Active galactic nuclei (AGN) are too compact to be resolved by any existing optical telescope facility, making it difficult to understand their structure and the emission processes responsible for their huge energy output. However, variability, one of their characteristic properties, provides a tool to probe the inner regions of AGN. Blazars are the best candidates for such a study, and hence a considerable amount of effort is being made to investigate variability in these sources across the electromagnetic spectrum. Here, using the Mt. Abu infrared observatory (MIRO) blazar monitoring program, we present intra-night, inter-night, and long term aspects of the variability in S5 0716+71, 3C66A, and OJ 287. These stars show significant variability on short (a few tens of mins, to a few hours, to a few days) to long term (months to years) timescales. Based on the light travel time argument, the shortest variability timescales (micro-variability) provide upper limits to the size of the emission region. While S5 0716 shows a very high duty cycle of variability (> 80 %), 3C66A shows a much lower intra day variability (IDV) duty cycle (< 20 %). All three show rapid variations within 2.5 to 3.5 hr, which, perhaps, are generated near the vicinity of black holes. Assuming this, estimates of the masses of the black holes are made at ~10⁹, 8×10⁸, and 2.7×10⁹ M_⨀ for S5 0716+71, 3C66A, and OJ 287, respectively. Multi-wavelength light-curves for the blazar PKS 1510-089 are discussed to infer the emission processes responsible for the recent flaring episodes in this source.

• Korean Management Science Review
• /
• v.13 no.1
• /
• pp.47-55
• /
• 1996

Rapid globalization of production and marketing functions makes choice of international transportation mode of great importance. In this paper, transportation mode is characterized by two factors, mean and variability of transportation lead time. We developed a simple mathematical model to estimate the relative impact of mean lead time, lead time variance and demand variance on the required average inventory level under specified service rates.

• Korean Journal of Veterinary Research
• /
• v.37 no.1
• /
• pp.213-220
• /
• 1997

A simple and rapid method known as matrix solid phase dispersion(MSPD) for simultaneous determination of 11 pesticide(2,4,5,6-tetrachlor m-xylene, ${\alpha}$-BHC, ${\gamma}$-BHC, ${\delta}$-BHC, aldrin, chlorfulazuron, heptachloroepoxide, dieldrine, endrin, endosulfan sulfate, and tetradifon) in beef fat was estabilished. Beef fat(0.5g) was fortified by adding the 11 pesticides and dibutylchlorendate as internal standard, and blended with 2g bulk $C_{18}$ in pestle and motar. Pesticides were eluted from an extraction column composed of $C_{18}$/ fat matrix blend and 2g activated Florisil by addition of 8ml acetonitrile. Then $2{\mu}l$ portion of the acetonitrile elute was directly analyzed by gaschromatography with electron capture detection. Unfortified blank control were treated similarly. Recovery rate were ranged from $83{\pm}5.4%$ to $94.2{\pm}7.6%$, intra-assay variability and inter-assay variability were ranged from 2.3% to 7.4%(n=5 for each insecticides) and from $6{\pm}1%$ to $12{\pm}3%$(n=10 for each insecticides), respectively. These results indicated that the MSPD methodology is aceptable for the extraction, determination and screening of residues 11 chroniated pesticides in beef fat.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.868-877
• /
• 2013

To understand the effects of marine environmental and meteorological parameters on laver Porphyra yezoensis production at Nakdong River Estuary, we analyzed marine environmental (water temperature, salinity, nutrients, etc.) and meteorological properties (air temperature, wind speed, precipitation, sunshine hours) with yearly and monthly variations in laver production over 10 years (2003-2013). Air and water temperature, wind speed, sunshine hours and precipitation were major factors affecting yearly variability in laver production at the Nakdong River Estuary. Lower air and water temperatures together with higher levels of nutrients and sunshine and stronger wind speeds resulted in higher laver harvests. Salinity and nitrogen did not show clear correlations with laver production, mainly due to the plentiful supply of nitrogen from river discharge and the low frequency of environmental measurements, which resulted in low statistical confidence. However, environmental factors affecting monthly laver production were related to the life cycle (culturing stage) of Porphyra yezoensis and were somewhat different from factors affecting annual laver production. In November, a young laver needs lower water temperatures for rapid growth, while a mature laver needs much stronger winds and more sunshine, as well as lower temperatures for massive production and effective photosynthesis, mostly in December and January. However, in spring (March), more stable environments with fewer fluctuations in air temperature are needed to sustain the production of newly deployed culture-nets ($2^{nd}$ time culture). These results indicate that rapid changes in weather and marine environments caused by global climate change will negatively affect laver production and, thus, to sustain the yield of and predict future variability in laver production at the Nakdong River estuary, environmental variation around laver culturing farms needs to be monitored with high resolution in space and time.

• The korean journal of orthodontics
• /
• v.44 no.2
• /
• pp.69-76
• /
• 2014

Objective: This study aimed to evaluate the accuracy and precision of polyurethane (PUT) dental arch models fabricated using a three-dimensional (3D) subtractive rapid prototyping (RP) method with an intraoral scanning technique by comparing linear measurements obtained from PUT models and conventional plaster models. Methods: Ten plaster models were duplicated using a selected standard master model and conventional impression, and 10 PUT models were duplicated using the 3D subtractive RP technique with an oral scanner. Six linear measurements were evaluated in terms of x, y, and z-axes using a non-contact white light scanner. Accuracy was assessed using mean differences between two measurements, and precision was examined using four quantitative methods and the Bland-Altman graphical method. Repeatability was evaluated in terms of intra-examiner variability, and reproducibility was assessed in terms of interexaminer and inter-method variability. Results: The mean difference between plaster models and PUT models ranged from 0.07 mm to 0.33 mm. Relative measurement errors ranged from 2.2% to 7.6% and intraclass correlation coefficients ranged from 0.93 to 0.96, when comparing plaster models and PUT models. The Bland-Altman plot showed good agreement. Conclusions: The accuracy and precision of PUT dental models for evaluating the performance of oral scanner and subtractive RP technology was acceptable. Because of the recent improvements in block material and computerized numeric control milling machines, the subtractive RP method may be a good choice for dental arch models.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1307-1313
• /
• 2019

Recent analysis results with realistic assumptions provide the variability of operator allowable time for the initiation of aggressive cooldown under small break loss of coolant accident or steam generator tube rupture with total failure of high pressure safety injection. We investigated how plant risk may vary depending on the variability of operators' failure probability of timely initiation of aggressive cooldown. Using a probabilistic safety assessment model of a nuclear power plant, we showed that plant risks had a linear relation with the failure probability of aggressive cooldown and could be reduced by up to 10% as aggressive cooldown is more reliably performed. For individual accident management, we found that core damage potential could be gradually reduced by up to 40.49% and 63.84% after a small break loss of coolant accident or a steam generator tube rupture, respectively. Based on the importance of timely initiation of aggressive cooldown by main control room operators within the success criteria, implications for improvement of emergency operating procedures are discussed. We recommend conducting further detailed analyses of aggressive cooldown, commensurate with its importance in reducing risks in nuclear power plants.