• Environmental Analysis Health and Toxicology
• /
• 제11권3_4호
• /
• pp.45-51
• /
• 1996

Histopathological changes of gills and caudal fins isolated from fishes, Cyprinus carpio, Carassius auratus, and Hernibarbus labeo, which were killed by oxygen deficiency or toxic chemicals, were studied. The toxic chemicals were HCl, NaOH, chloroform, benzene, heavy metals(Cu, Cr, Zn, Pb, Hg), and o-dichlorobenzene. The exposure level was enough to kill the fishes within 30 minutes. Oxygen deficient water was prepared by aeration of nitrogen gas and the oxygen concentration was less than l ppm. Cryocutting was used for the rapid preparation of tissue slides and the tissues were stained by hematoxylin/eosin. In the fishes killed by hazardous chemicals, congestion and/or hyperplasia of secondary lamella and erosion of fin were found as the major histopathological changes. Whereas, these characteristics were not observed in gills or caudal fins of fishes killed by oxygen deficiency. These different bioindications appeared in the fishes killed by toxic substances or natural causes, can be used for the rapid identification of the causes of fish kills.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.146-153
• /
• 2012

RP system which is widely used to reduce the time of product development is to resolve the problem of cutting work. It is a method using laminated thin films to produce many forms. The RP equipment used for this experiment is FDM system. This can produce 3D model with using 3D CAD designed file within a relatively short time. Not only this, this system also through 3D file preparation, 3D product manufacture, removal support these 3 step operating process can easily produce goods, but product can be different from original design. This research has been conducted to minimize this error. To apply to the circular product made a circular specimen and measured several times with 3D scanner and find out average 99.622% of accuracy. This result is applied to RP system, and with this changed design produced a specimen, and found out the accuracy is increased to 99.958%. If this is applied to circular products, we can produce more precise products with less process.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.57-63
• /
• 2004

various applications is presented. It is based on rapid-prototyping of transparent model for flow visualization and on the use of refractive index matching that enables efficient and clear visualization of the flow inside the model. The model is immersed in the index-matching fluid in a glass tank so that any displacement and rotation of the model in the tank have no influence on the optical setup for image acquisition to be made through a glass wall. This can facilitate greatly the camera calibration for stereo PIV and 3-D PTV. As the flow model is generated directly from 3-D surface data, no laborious preparation of the flow model is needed. This approach for seamless linking of model generation and PIV measurement is applicable to various flow measurements in automobile, ship building, fluid machinery, turbine, electrical appliances, heat exchanger, electronic cooling, bio-engineering and so on.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.117-121
• /
• 1998

The Rapid Expansion of supercritical fluid Solutions (RESS) process was applied to particles coating. Experiments were conducted in a fluidized bed with an internal nozzle in the center of the reaction tube. Microcapsules (mean particle size : 49$\mu\textrm{m}$) prepared by spray drying method were used as the core particles. Supercritical CO2 solutions of paraffin were expanded through the nozzle in to the bed that was fluidized by air. Surface morphology prepared particles was observed by SEM. For the inspection of particle size change, particle size distributions were measured before and after coating. The releasing behavior of Mg2+ ions inspected by AA.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.9-15
• /
• 2018

The Ministry of National Defense announced 'Defense Reform 2.0' that aims to strengthen the country's security for decrease of regional uncertainties, growing requirements for advanced technologies, and a need for more efficiency in the Republic of Korea(RoK) Armed Forces this year. It said RoK Armed Forces have to change efficiently in preparation for rapid decline in military service resources as demographic cliff turning into reality, and the rapid evolution of the "battlefield environment" caused by developments in military science and technologies. RoK Navy combat Management System(CMS) made by domestic proprietary technology since 2000s and development centered on Agency for Defense Development require design changes for added requirements. So in this paper, I propose method of design a low cost and high efficiency navy CMS architecture based on high performance server and virtualization technology. And I create a test environment for analysis performance and compare the performance of proposed navy CMS and existing navy CMS.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.5-14
• /
• 2002

Internet becomes very common tool far communication and data sharing. Virtual readily(VR) on web browser, and virtual prototyping and virtual manufacturing is widely used in many engineering fields. The reduction of overall development process and error minimization during data conversion becomes very crucial where sharing data via Internet and VR. This paper deals with the advantage and disadvantage of VRML format used in RP(Rapid Prototyping), and a software for RP data preparation is developed. If VRML format as an international standard for VR, is replaced with STL format, the weak points of STL formal can be overcome and the technique related to virtual prototyping and virtual manufacturing can be addressed more systematically by sharing the data. The system developed in this work shows a good window to get access to a mare realistic observation of an object for an RP system from a long remote sites in a more systematic way.

• 분석과학
• /
• 제10권2호
• /
• pp.146-152
• /
• 1997

미생물막 전극을 이용하여 신속하게 생화학적 산소요구량(BOD)을 측정할 수 있는 신속 BOD 측정장치를 개발하였다. 미생물의 배양과 미생물막의 제조방법, BOD 측정시 시료 용액의 흐름속도의 영향, 용액의 pH의 영향, 그리고 미생물막의 감응특성 등에 관하여 연구하였다. 본 연구에서 개발한 신속 BOD 측정장치는 개인용 컴퓨터에 연결되어 BOD 측정의 전 과정이 자동으로 진행되도록 제작되었으며, 시료 용액의 유속이 7.8mL/min일 때 시료 주입 5분 후의 측정시에 좋은 결과를 나타내었다.

• KSBB Journal
• /
• 제21권4호
• /
• pp.302-305
• /
• 2006

PCR증폭기술 및 무세포 단백질 발현 기술의 융합을 통하여, 여러 형태로 서열의 일부가 결손된 단백질들을 고속으로 발현할 수 있는 시스템을 구축하였다. Exonuclease 및 endonuclease에 대한 mRNA의 안정성 향상을 통하여, PCR 증폭을 통해 획득한 선형 DNA로부터의 안정적인 단백질 발현이 가능하였다. 동일한 플라스미드로부터 출발하여 수 시간 이내에 C-말단의 아미노산서열이 순차적으로 제거된 다양한 형태의 트랜스아미나제 Vf의 활성변화를 확인할 수 있었으며 이같은 기술은 각종 효소 단백질의 서열-활성 상호관계의 연구를 위한 유용한 기반을 제공할 것으로 기대된다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1048-1049
• /
• 2006

Rapidly solidified ribbon-consolidation processing was applied for preparation of high strength bulk Mg-Zn-Gd alloys. Mg alloys have been used in automotive and aerospace industries. Rapid solidification (RS) process is suitable for the development of high strength Mg alloys, because the process realizes grain-refinement, increase in homogeneity, and so on. Recently, several nanocrystalline Mg-Zn-Y alloys with high specific tensile strength and large elongation have been developed by rapidly solidified powder metallurgy (RS P/M) process. Mg-Zn-Y RS P/M alloys are characterized by long period ordered (LPO) structure and sub-micron fine grains. The both additions of rare earth elements and zinc remarkably improved the mechanical properties of RS Mg alloys. Mg-Zn-Gd alloy also forms LPO structure in -Mg matrix coherently, therefore, it is expected that the RS Mg-Zn-Gd alloys have excellent mechanical properties. In this study, we have developed high strength RS Mg-Zn-Gd alloys with LPO structure and nanometer-scale precipitates by RS ribbon-consolidation processing. $Mg_{97}Zn_1Gd_2$ and $Mg_{95.5}Zn_{1.5}Gd_3$ and $Mg_{94}Zn_2Gd_4$ bulk alloys exhibited high tensile yield strength (470 MPa and 525 MPa and 566 MPa) and large elongation (5.5% and 2.8% and 2.4%).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.453-456
• /
• 2000

This paper presents experimental results on selecting optimal process parameters for UV-Vaccum casting. The UV-Vacuum casting is a relatively new process that allows very rapid mold preparation and part duplication via UV curing. Effect of various process variables such as pressure and temperature on mold strength and part accuracy was evaluated by using Taguchi method.