• 전기학회논문지
• /
• 제67권3호
• /
• pp.433-439
• /
• 2018

In this paper, a SDINS(strapdown inertial navigation system) rapid initial alignment technique with adaptive time delay compensation is proposed. The proposed method consists of two steps. In first step, misalignment and data latency are estimated by conducting pre-transfer alignment. Then, hybrid alignment is designed to rapidly find the misalignment changes induced by pyro-shock. To improve the performance of hybrid alignment, adaptive time delay compensation method is suggested. We verify the performance improvement of the proposed alignment scheme comparing with the conventional transfer alignment method by van test. The test result shows that the proposed alignment technique improves alignment performance.

• 천문학회보
• /
• 제38권2호
• /
• pp.86.1-86.1
• /
• 2013

Observations of a filament showing an activated barb recorded from the at the Dutch Open Telescope (DOT) on 2010 August 20 are presented. The filament developed a barb in 10 minutes, which disappeared within the next 35 minutes. Such a rapid formation and disappearance of a filament barb is unusual, and has been seldom reported. Line-of-sight velocity maps were constructed from images in seven line positions along the H-alpha line. We observe flows in the filament spine towards the barb location prior to its formation, and flows in the barb towards the spine during its disappearance. Photospheric magnetograms from Helioseismic Magnetic Imager on board the Solar Dynamics Observatory were used to determine the changes in magnetic flux in the region surrounding the barb location. The variation of magnetic flux in this duration support the view that barbs are rooted in minor magnetic polarity.

• 소성∙가공
• /
• 제16권2호
• /
• pp.113-119
• /
• 2007

Rapid mold heating has been recent issue to enable the injection molding of thin-walled parts or micro/nano structures. Induction heating is an efficient way to heat material by means of an electric current that is caused to flow through the material or its container by electromagnetic induction. It has various applications such as heat treatment, brazing, welding, melting, and mold heating. The present study covers a finite element analysis of the induction heating process which can rapidly raise mold temperature. To simulate the induction heating process, the electromagnetic field analysis and transient heat transfer analysis are required collectively. In this study, a coupled analysis connecting electromagnetic analysis with heat transfer simulation is carried out. The estimated temperature changes are compared with experimental measurements for various heating conditions.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.89-96
• /
• 1998

LOM (Laminated Object Manufacturing) process is one of rapid prototyping processes, where shapes are formed by accumulating cross sections of laser-cut paper. The process expects wide popularity since it is simple and the material is familiar to conventional mockup makers. However the dimensional accuracy of LOM parts is not so good as that of traditional wooden mockups, since the stack of adhesive-spread papers causes significant dimensional error. Also it is unclear how the other unknown environmental effects cause the errors as well. In this work the dimensional errors of LOM parts are measured and analysed. Experiments with test parts were performed in order to see the effects of part shape, moist, and sealer on dimensional variations. The characteristic of the paper is also analysed. Re-heating LOM parts, which is shown to have the effect of recovering dimensional changes, is applied to an example part.

• Clinical and Experimental Pediatrics
• /
• 제54권10호
• /
• pp.395-400
• /
• 2011

During the adolescent period, they experience rapid physical, emotional, cognitive developments while they establish their lifestyle and habitual routines that strongly influence adult health and life. Recent rapid economic growth in Korea, and the earlier onset of physical, sexual, and psychological maturation of adolescents, has resulted in changes in the health status of adolescents from many years ago. Risk-taking behaviors such as drinking alcohol, smoking, and sexual experiences are critical issues that affect the health of, adolescents. Therefore, it is important for pediatricians to note the that risk-taking behaviors of adolescents in Korea that are caused by individual psychosocial factors. This review article illustrates the current health status of Korean adolescents and provides an overview of risk-taking behaviors, to inform pediatricians about some of the key issues.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.490-494
• /
• 2011

In this paper, using by rapid heating and cooling systems for injection molding and temperatures to changes. In the process of molding temperature and pressure inside the mold was found. In addition, the tensile strength of test specimens were molded, mechanical properties of injection molded parts were identified on mold temperature. Copper could withstand more tensile force than NAK. Therefore, it can be concluded that materials with high heat conductivity must be used in thin walled products.

• 아시안잔디학회지
• /
• 제3권1호
• /
• pp.34-38
• /
• 1989

This research was carried out to elucidate on standing crops , dry matter yields , the nutritive value and in vitro digestihility according to mowing frequency and period during the growing season in the 3cm moving plot in Korean Lawn , Zoysia japonica Sheud . The increasing tendency in the standing crops was showed yield from May to Septemher . In the dry matter yield , there was a tendency of rapid increase from May to August ( maximum level ). Afterwards there appeared a tendency of decrease slight ( Table 3). The nutritive value and in vitro digestihility ; The crude protein and crude fat in the 3cm moving plot showed a tendency of slight decrease as a moving period and frequency . On the other hand , Neutral detergeat fiber , Acid detergent fiber and cellulose showed a tendency of slight increase as mowing period and frequency . in vitro digestibility appeared a rapid decreasing rate as a mowing period and frequency was delayed (table 2.4).

• 한국재료학회지
• /
• 제13권5호
• /
• pp.285-291
• /
• 2003

The nanosized silver and gold particles are prepared by ERC method in which metal vapors with high temperature is rapidly quenched by coolants such as liquid nitrogen or liquid argon. In order to monitor the crystal structural changes on the internal and the surface of the nanosized noble metal particles, lattice parameter, internal strain and Debye-Waller factor are investigated, and the calculation of X-ray diffraction scattering intensity is performed. The lattice parameters of silver and gold particles agree with those of bulk materials, and crystal internal strain of the metal particles is not changed by rapid cooling. The Debye-Waller factor of gold particles is increased with decreasing particle size because of the surface softening phenomenon of nanosized particles, but the crystal structural change on the surface of the particles is not detected from the comparison the calculated X-ray diffraction profile with the experimental profile on gold particles with the particle size of 4 nm.

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.303-309
• /
• 2017

The flexible AC transmission system (FACTS) provides a new advanced technology solution to improve the flexibility, controllability, and stability of a power system. The unified power flow controller (UPFC) is outstanding for regulating power flow in the FACTS; it can control the real power, reactive power, and node voltage of distribution networks. This paper investigates the performance of the UPFC for power flow control with a series of step changes in rapid succession in a power system steady state and the response of the UPFC to distribution network faults and islanding mode. Simulation was carried out using the MATLAB's simulink sim power systems toolbox. The results, which were carried out on a 5-bus test system and a 4-bus multi-machine electric power system, show clearly the effectiveness and viability of UPFC in rapid response and independent control of the real and reactive power flows and oscillation damping [6].

• 경영정보학연구
• /
• 제3권2호
• /
• pp.277-288
• /
• 2001

Of critical importance to the success of any e-commerce site are the two factors: rapid application development and quick response time. A three-tier architecture composed of presentation layer, business layer, and data access layer emerges to allow rapid changes in user interface, business logic, and database structures. Too often, such a logical three-tier architecture is considered as requiring a three-tier physical architecture: Web server, application server, and database server running on separate computers. Contrary to the common belief, a Web stress test reveals that the three-tier logical architecture implemented on a two-tier physical platform guarantees a quicker response time due to the reduction in cross-machine communications. This would lead business firms to economize their spending on e-commerce: increasing the number of physical servers to expedite transaction is not necessarily the best solution. Before selecting a particular hardware configuration, a Web stress test needs to be conducted to compare the relative merits of alternative physical architectures. Together with capacity planning, Web stress test emerges as a powerful tool to build robust, yet economical e-commerce sites.