• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.451-458
• /
• 2011

Adhesives derived from renewable resources allow wood panel producers to make lower cost alternatives to formaldehyde-based adhesive resins. Among them, adhesive components extracted from industrial by-products or wastes are the most important research fields in the efficient utilization of waste and cost reduction. In our study, the rapeseed flour, which is a by product from the production of biodiesel extracted from rapeseed, was introduced to develop alternative adhesives for the production of wood flooring. The rapeseed flour was hydrolyzed with 1% sodium hydroxide solution and PF prepolymers were prepared with 3-molar ratios, 1.8, 2.1 and 2.4. The linear fracture mechanics was introduced to evaluate the glue bond quality in wood flooring composed of fancy-veneered and plywood, and the formaldehyde emission and adhesive penetration were also investigated. The formaldehyde emissions of wood flooring met the requirement of the standard of $SE_0$ specified in the KS standard. The rapeseed flour adhesive penetrated sufficiently into the vessel elements and lumens in fancy veneer and plywood and gave strong bond quality to the wood flooring. The fracture mechanics was introduced to evaluate the adhesive joint between fancy veneer and plywood. The critical stress intensity factor ($K_{IC}$) of boliva overlayed wood flooring was increased with increasing molar ratio and this was the same tendency in oak overlayed wood flooring. From the results, the formulated adhesives were efficiently used to bond fancy veneer onto the plywood to make wood flooring and showed a potential to be used as a component of environmentally friendly adhesive resin systems for production of flooring.

• Korean Journal of Food Science and Technology
• /
• v.24 no.3
• /
• pp.279-283
• /
• 1992

This study was undertaken to investigate the effects of added phytate and pH on the solubility and in vitro digestibility of low-phytate rapeseed protein isolate. Phytate content of low-phytate rapeseed protein isolate was 1.5%, as a result of 66% removal from defatted rapeseed flour and the protein: phytate ratio was 58:1. Solubility of rapeseed protein isolate at pH 2.0 and pH 11.5 was much higher than near the isoelectric point, pH 5.0. It's solubility was lowered by adding an increased amount of phytate especially at pH 2.0. The inhibitory effect of phytate toward pepsin digestibility of rapeseed protein isolate decreased by the increasing amount of phytate added. It is suggested that the production of low-phytate rapeseed protein isolate is necessary to improve the functionality and nutritional value in order to utilize it as food material.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.177-185
• /
• 2012

The interest to develop adhesives from renewable resources is growing to substitute petroleum-based adhesive resins in the manufacture of wood based panels. In our study, rapeseed flour (RSF), which is the by-product of bio-diesel produced from rapeseed, were hydrolyzed with acid and alkali. As a crosslinking agents of the RSF hydrolyzates, phenol-formaldehyde prepolymers (PF) were prepared. The RSF hydrolyzates and PF were mixed to complete the formulation of RSF-based adhesive resins, and the resins were applied to make the medium density fiberboard (MDF). The physical and mechanical properties of the MDF were measured to examine whether RSF can be used as raw materials of adhesive resins for the manufacture of MDF or not. The average moisture content and density of the MDF made with RSF-based adhesive resins satisfied the minimum requirement of KS standard, but the thickness swelling was not. The bending strengths of the MDF made with RSF-based adhesive resins were lower than that of the MDF made with commercial UF resins, but the internal bonding strengths of tested MDF in some make-up conditions of RSF-based adhesive resins were higher than that of MDF made with commercial UF resins. These results showed the potential of RSF as a raw material of adhesives for the production of MDF. Future works on the optimal manufacturing process conditions of MDF made with RSF-based adhesive resins are required to improve the performance of MDF made with RSF-based resins.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.221-229
• /
• 2011

Due to the increase of oil price and the environmental issue such as the emission of volatile organic compounds, the necessity for developing alternative resins of petroleum-based adhesive resins, which have extensively been used for the manufacture of wood-based products, has been speculation since the early 1990. In our study, rapeseed flour (RSF), which is the by-product of bio-diesel produced from rapeseed, were hydrolyzed by enzymes. As a crosslinking agents of the RSF hydrolyzates, phenol-formaldehyde prepolymers (PF) were prepared. The RSF hydrolyzates and PF were mixed to complete the formulation of RSF-based adhesive resins, and the resins were applied to make the laminated veneer lumber (LVL). The physical and mechanical properties of the LVL were measured to examine whether RSF can be used as raw materials of adhesive resins for the fabrication of LVL or not. The average moisture content and soaking delamination rate of the LVL bonded with RSF-based adhesive resins exceeded the minimum requirement of KS standard. Moreover, thermal analysis of the RSF-based resins showed similar tendencies except for the RSF-based adhesive resins formulated with pectinase-hydrolyzed RSF. The bending strengths of the LVL were higher than that of the LVL made with commercial PF resins. These results showed the potential of RSF as a raw material of alternative adhesives for the production of LVL. Further works on the optimal conditions of RSF hydrolysis and spreading characteristics for RSF-based adhesive resins is required to improve the adhesive performance of RSF-based resins.

• The Korean Journal of Mycology
• /
• v.21 no.3
• /
• pp.212-216
• /
• 1993

Agricultural and forest wastes were tested as substrate for the production of Flammulina velutipes. Among the meranti, pine tree, mixed sawdust, coffee waste and peanut hull tested, coffee waste was the best basal substrate for the production of basidiocarps. When various supplements, such as ricebran, brewer's grain, defatted corn flour, defatted soybean flour and defatted rapeseed flour were tested, defatted corn flour was chosen for the production of basidiocarps. Maximum yield of basidiocarps(129.38 g/bottle) was obtained from the mixed medium at 4 : 1 ratio of coffee waste and defatted corn flour.

• Korean Journal of Food Science and Technology
• /
• v.6 no.3
• /
• pp.138-146
• /
• 1974

The present study was undertaken to investigate the nutritive value of various defatted oil-seed flours in the diet by studying the effect of alternative diets on growing rats, to attention growth, food intake, weight of organs and the levels of total cholesterol, phospholipid and triglyceride in serum and liver tissue. Sixty male Albino rats (Splague Dowley) weighing 47-55 g were divided into five experimental groups and one control group of ten each, and were fed for 24 weeks with the respective diets. Each of five different diets was supplemented with defatted flours as dietary protein sources. Four of other diets were composed of 7.5 sesame seed, rapeseed, sunflower seed and cottonseed flour respectively, with the same amount of defatted soybean flour, while the fifth diet tested was prepared with 15% soybean flour. The results of this study were as follows. 1) It was noteworthy that the five defatted oilseed flour diets demonstrated much improvement of nutritive value. Sesame seed flour and sunflower seed flour, especially appeared to be worthwhile as human foods. 2) From the results of biochemical tests of the serum and liver lipid content of Albino rats, after feeding with the respective diets, it can be concluded that, from a nutritional point of view, the toxic effects of oilseed flours like rapeseed and cottonseed flour, which contain toxic substances, are reduced when they are mixed with soybean flour.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.475-489
• /
• 2013

This work was conducted to investigate the effect of the addition of binders, such as rapeseed flour, coffee waste, bark, pine cone and lignin powder, on the fuel characteristics of the pellets fabricated with larch and tulip tree sawdust. Moisture content, bulk density and higher heating value of most pellets fabricated with the binders exceeded the 1st-grade pellet standard designated by Korea Forest Research Institute, but ash content of the pellets fabricated with rapeseed flour or bark of 10 wt% on the dry weight basis of sawdust was satisfied with just the 2nd- or 3rd-grade standard. The durability of tulip tree-pellets was positively influenced by the addition of rapeseed flour, coffee waste or lignin powder and increased with increasing the amount of the binders. For larch-pellets, the increase of binders did not greatly affect the durability, and even the durability reduced with the increase of bark or pine cone. From the microscopic observation, the obvious feature of pellet surfaces was not identified by the type of binder but by the addition amount of the binder. In summary, the addition of binders contributed to the fuel characteristics of wood pellets, and particularly the characteristics of wood pellets fabricated with coffee waste improved greatly. Therefore, if the binders are secured sufficiently with a reasonable cost, it might be possible to commercialize wood/binder pellets, which have better fuel characteristics than conventional wood pellets.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.164-176
• /
• 2012

In the present study, rapeseed flour (RSF), which is a by-product from the production of edible oil and biodiesel extracted from rapeseed, was used to develop alternative adhesives for the production of plywood panels. To examine the effects of the enzyme on the adhesive properties and formaldehyde emission of the RSF-based adhesive resins, three enzymes, such as cellulase (CEL), pectinase (PEC) and protease (ALC), were used either separately or together. As a crosslinking agent, PF prepolymers, which were prepared with 1.5, 1.8 and 2.1 mole formaldehyde and 1 mol phenol (1.8-, 2.1- and 2.4-PF), were added into the RSF hydrolyzates. The adhesive resins formulated with CEL- or CEL-PEC-RSF hydrolyzates and 1.8-F/P PF prepolymers exhibited excellent adhesive strengths and formaldehyde emission. The tensile shear strength and formaldehyde emission of the plywood panels bonded with the formulate resins were satisfied with the minimum requirement of the KS standard for ordinary plywood panels (0.6 N/$mm^2$). In addition, formaldehyde emissions of the plywood panels approached to that of E0 specified in the KS standard (0.5 mg/${\ell}$), and even had much better than those of commercial UF glue mixes. Overall, the use of RSF-based adhesive resins for the production of plywood panels might provide durable adhesive properties and an environmentally friendly substitute for petroleum-based adhesive resins. However, further researches - the increase of solid content of RSF-based adhesives for reducing press time and the microscopic observation of plywood specimen for identifying the relationship between tensile shear strength and the penetration of adhesives into wood structure - are required to commercialize the RSF-based adhesives.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.323-332
• /
• 2010

Petroleum-based adhesive resins have extensively been used for the production of wood panels. However, it is necessary to develop environmentally friendly adhesive resins due to the increase of manufacturing cost and the environmental issue, such as the emission of volatile organic compounds, of the pertroleum-based adhesive resins. This study was conducted to formulate environmentally friendly adhesive resins using by rapeseed flour (RSF), which is the by-product of bio-diesel produced from rapeseed, for replacing petroleum-based adhesives with them. To formulate RSF-based adhesive resins, RSF was hydrolyzed in de-ionized water, 1% and 3% sodium hydroxide solutions. As a crosslinking agent, PF prepolymers were prepared with 1.8, 2.1 and 2.4 mol formaldehyde and 1 mol phenol (1.8-, 2.1- and 2.4-PF), and then mixed with RSF hydrolyzates to complete the formulation of RSF-based adhesive resins. The RSF-based adhesive resins were applied to fabricate 3-ply plywood panels. The solid content of RSF-based adhesive resins were ranged from 26.08% to 36.12% depending on the hydrolysis condition of RSF and PF prepolymer type with a high viscosity. The tensile shear strength and wood failure of plywood fabricated with RSF-based adhesive resins exceeded a minimum requirement of KS standard for ordinary plywood regardless of the hydrolysis condition of RSF and PF prepolymer type. Formaldehyde emissions of the plywood panels fabricated with 1.8-PF and RSF hydrolyzates were lower than that of E0 specified in the KS standard. Based on the results, RSF might be used as a raw material of environmentally friendly adhesives for the production of plywood panels, but further researches - the increase of solid content of RSF-based adhesives for reducing press time and the microscopic observation of plywood specimen for identifying the relationship between tensile shear strength and the penetration of adhesives into wood structure - are required to commercialize the RSF-based adhesives.

• Applied Biological Chemistry
• /
• v.29 no.2
• /
• pp.212-218
• /
• 1986

Proteins in Korean rapeseeds, as in many other plantseeds, are usually bound to phytate molecules. These phytate-bound proteins are of little value as foodstuffs because of their poor solubility in digestive systems. Therefore it is necessary to remove phytates from proteins in order to convert these proteins io a useful foodstuff. In the work, an efficient procedure for removal of phytates from defatted Korean rapeseed was found. The influence of pH on the solubility of protein and phytate of rapeseed flour showed that the former was the lowest at pH 5.0 and began to increase as pH further raised. Meanwhile, the latter was the highest at pH 6.0, however, it was decreased abruptly at alkaline pH, especially to content of 1.3% at pH 11.5. The solubility cf protein was relatively high in NaCl aqueous solution at $pH\;6.0{\sim}8.0$, and did not male any noticeable difference depending on NaCl concentration. On the other hand, the solubility of phytate was high at pH of below 6.0 showing an abrupt decrease at pH of above 6.0. The solubility of protein in $CaCl_2$ aqueous solution was highest at $pH\;6.0{\sim}8.0$, however, there was no significant change at the whole range of tested pH of the solution. A maximum solubility of phytate was shown at $pH\;3.0{\sim}4.0$. And it was decreased abruptly at a higher pH of the above range and also decreased at a lower pH with higher $CaCl_2$ concentration. The solubility of phytate in $Na_2SO_3$ aqueous solution was highest at $pH\;5.0{\sim}8.0$. As the concentration goes up the maximum value of solubility was found to move to higher pHs. Depending on the concentration of $Na_2SO_3$, the decreasing pattern was changed in an alkaline solution. The solubility of phytate in the solution containing low concentration of $Ca^{2+}$ ion was low in all treatments at pH of above 7.0 and showed the maximum value at low pH as $Ca^{2+}$ ion concentration increases. The solubility of protein at pH 11.5 showed the highest value in $1mM\;Ca^{2+}$ ion solution.