• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.570-577
• /
• 2014

Range-based real time localization systems require superior localization techniques as well as accurate ranging algorithms for better performance. To evaluate the ranging accuracy between two nodes in practical environments, this paper does not only present a qualitative analysis by computing a distance equation under SDS-TWR measurement model of no symmetry assumption, but also executes a quantitative evaluation by doing experiments after building up a test network employing the developed sensor node. Experimental results show that the ranging accuracy of the proposed implementation of IEEE 802.15.4a software stack is superior with smaller average error rate by 60% to one of the commercial Nanotron's reference development kit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.575-582
• /
• 2009

The localization algorithm(LAtu) using the IDentification Code($C_{ID}$) is suggested in RSS(Received Signal Strength) based Wireless Sensor Network(WSN), and the localization system using the suggested algorithm is designed and implemented in this paper. In addition to this, the performance of ranging correction quality and localization error of the localization system(System(LAtu)) that is developed using the LAtu is analyzed and compared with that of the localization system(System(LAieee)) using the channel model of IEEE 802.15.4 standard(LAieee) by the actual experimentation. From the experimentation, the ranging correction quality is analyzed that the LAtu is highly better than the channel model of LAieee about 34% under the distance between the moving module and the beacon module($D_{MM-BM}$) is 2m, and is also a few better than that of the LAieee about average 5% under the $D_{MM-BM}$ is above 5m. The localization error quality of the System(LAtu) is lower than that of the System(LAieee)) about 1cm under the lecture room and 4cm in the large lecture room.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.563-565
• /
• 2011

In this paper, the implementation consideration of communication system is suggested in IEEE 802.15.4a based wireless sensor network, and the practical issues for UWB ranging system design are investigated. First, design of UWB signals for ranging applications is considered, and selection of various signal parameters is studied. Then, link analysis is performed in order to determine UWB signal quality as a function of distance.

• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2019

This paper presents an air flow sensor (AFS) based on a polymer thin film. This AFS primarily consists of a polymer membrane attached to a metal-patterned glass substrate and a temperature-sensing element composed of NiCr. These two components were integrated on a single glass substrate. The AFS measures changes in capacitance caused by deformation of the polymer membrane based on the air flow and simultaneously detects the temperature of the surrounding environment. A readout integrated circuit (ROIC) was also fabricated for signal processing, and an ROIC chip, 1.8 mm by 1.9 mm in size, was packaged with an AFS in the form of a system-in-package module. The total size of the AFS is 1 by 1 cm, and the diameter and thickness of the circular-shaped polymer membrane are 4 mm and $15{\mu}m$, respectively. The rate of change of the capacitance is approximately 11.2% for air flows ranging between 0 and 40 m/s.

• ETRI Journal
• /
• v.45 no.4
• /
• pp.570-580
• /
• 2023

Sensor nodes are the most significant part of a wireless sensor network that offers a powerful combination of sensing, processing, and communication. One major challenge while designing a sensor node is power consumption, as sensor nodes are generally battery-operated. In this study, we proposed the design of a low-power, long range-based wireless sensor node with flexibility, a compact size, and energy efficiency. Furthermore, we improved power performance by adopting an efficient hardware design and proper component selection. The Nano Power Timer Integrated Circuit is used for power management, as it consumes nanoamps of current, resulting in improved battery life. The proposed design achieves an off-time current of 38.17309 nA, which is tiny compared with the design discussed in the existing literature. Battery life is estimated for spreading factors (SFs), ranging from SF7 to SF12. The achieved battery life is 2.54 years for SF12 and 3.94 years for SF7. We present the analysis of current consumption and battery life. Sensor data, received signal strength indicator, and signal-to-noise ratio are visualized using the ThingSpeak network.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.125-130
• /
• 2013

Compared to OWR (One-Way Ranging) method that requires precise network time synchronization, TWR (Two-Way Ranging) method has advantages in building an indoor WPAN (Wireless Personal Area Network) location system with lower cost. However, clock offsets of nodes in WPAN system should be eliminated or compensated to improve location accuracy of the TWR method. Because conventional clock offset elimination methods requires multiple TWR transactions to reduce clock offset, they produce network traffic burden instead. This paper presents a clock offset estimation method that can reduce clock offset error with a single TWR transaction. After relative clock offsets of sensor nodes are estimated, clock offsets of mobile tags are estimated using a single TWR communication. Simulation results show that location accuracy of the proposed method is almost similar to the conventional clock offset elimination method, while its network traffic is about a half of the conventional method.

• ETRI Journal
• /
• v.40 no.4
• /
• pp.522-530
• /
• 2018

In this study, we developed a robotic walker that actively controls its speed and direction of movement according to the user's gait intention. Sensor fusion between a low-cost light detection and ranging (LiDAR) sensor and inertia measurement units (IMUs) helps determine the user's gait intention. The LiDAR determines the walking direction by detecting both knees, and the IMUs attached on each foot obtain the angular rate of the gait. The user's gait intention is given as the directional angle and the speed of movement. The two motors in the robotic walker are controlled with these two variables, which represent the user's gait intention. The estimated direction angle is verified by comparison with a Kinect sensor that detects the centroid trajectory of both the user's feet. We validated the robotic walker with an experiment by controlling it using the estimated gait intention.

• Journal of Sensor Science and Technology
• /
• v.17 no.2
• /
• pp.106-113
• /
• 2008

Perceiving a 3D moving target is important for automated machines including robots in a factory. Although stereovision or ultrasonic ranging is often employed for the purpose, the former requires high-cost systems, and the latter suffers from low-resolution. In this paper, we propose a PSD sensor array to acquire the 3D profile of an object conveyed by a belt. Rectangular parallelepiped target objects at random positions and orientations are assumed. Nine PSD sensors are configured in a $3{\times}3$ array above the belt, and fired in a sequence so that cross-talk can be avoided. Time gaps among sensor readings are compensated to get a result that is obtainable when sensors' measurements are made simultaneously along a sensing line. The system designed is tested with various objects in experiments.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.244-245
• /
• 2009

일반적으로 LiDAR(Light Detection And Ranging)의 자료로부터 3차원 위치정보와 속성 정보를 취득하여 활용 하는 연구가 많이 진행되고 있다. 본 연구에서는 Grid($100m{\times}100m$) 기반인 2차원적 Grid Point를 통해 Sensor Field를 정하고 LiDAR의 3차원적 좌표정보를 이용하여 최적 센서 위치를 선정하고 중간에 장애물(Obstacle)이 존재하는 경우 또한 알고리즘을 통해 최적위치인 Grid point를 선정하였다. 알고리즘은 3가지 측면을 고려하여 분류하였다. 첫째 장애물이 없는(Non Obstacle) 2차원적인 경우, 둘째 장애물이 존재(Obstacle)하는 2차원적인 경우, 셋째 장애물이 존재(Obstacle)하며 3차원적인 알고리즘을 고려하였다. 향후 연구에서는 LiDAR를 직접 적용하여 최적 선정 지역을 도출하여 알고리즘을 적용할 것이다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.78-83
• /
• 2007

Robot collects surrounding information to recognize tile unknown environment by using various sensors such as visual, infrared ray and ultra sonic sensors. Although visual sensor is the most popular one, it has some difficulties in collecting data in dark or too bright environment due to sensitivity of the light. It also requests significant amount of calculation on collecting data from certain images with marked, straight and curved ones. As an alternative, ultra sonic sensor can simply overcome this visual sensing system's flaw and easily be used. It is easier than visual system, especially in case of collecting data on object and distance in dark environment. Ultra sonic sensor can replace the expensive visual sensing system not only in avoiding obstacles but also in reaching to the target area smoothly. The purpose of this paper is to develop the algorithm to optimize the environmental recognition, path planning and free-ranging by minimizing errors caused by inaccurate information and by considering characteristics of the ultra sonic rays such as refraction and diffusion. This paper also realizes the system that can recognize the environment and make the appropriate path planning by applying the algorithm on this moving robot.