• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2664-2674
• /
• 1994

Drag, lift, and pitching moment measurements have been made on a range of slanted-base ogive cylinders, using the KANOMAX wind tunnel and balance system. Test Reynolds numbers(based on model maximum diameter) varied from $0.54{\times}10^{5}{\;}to{\;}1.56{\times}10^{5}$. Crossflow velocity maesurement was conducted by 5-hole pitot tube at $Re_{D}=1.46{\times}10^{5}$. For two base angle $({\theta}=30$ and 45 deg.), aerodynamic forces and moment were measured with increasing angle of attack(0~30 deg.). Two types of wake flow were observed, a quasisymetric turbulent closure or a longitudinal vortex flow. Aerodynamic characteristics differ dramatically between the two wake types. It was found that the drag, lift and pitching moment coefficients increased with increasing angle of attack.

• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.66-72
• /
• 2014

The local heat transfer and pressure drop of developed turbulent flows in the smooth convergent/divergent channels with rectangular and square cross-sectional areas along the axial distance have been investigated experimentally. The measurement was conducted within the range of Reynolds numbers from 15,000 to 89,000. The channel hydraulic diameter ratios of 0.67 and 1.49 in the rectangular channel with 2 inclined walls and the ratios 0.75 and 1.33 in the square channel with 4 inclined walls are considered. The comparison showed that among the four channels the square divergent channel has the highest thermal performance at the identical mass flow rate, at the identical pumping power, and at the static pressure drop.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.5
• /
• pp.509-522
• /
• 1998

An experimental investigation is reported on the heat transfer coefficient from a rotating flat plate in a round turbulent normally impinging water jet. Tests were conducted over a range of jet flow rates, rotational speeds, jet radial posetions with various combinations of three jet nozzle diameter. Dimensionless correlation of average Nusselt number for laminar and turbulent flow is given in terms of jet and rotational Reynolds numbers, dimensionless jet radial position. We suggested various effective promotion methods according to heat transfer characteristics and aspects. The data presented herein will serve as a first step toward providing the information necessary to optimize in rational manner the cooling requirement of impingement cooled rotating machine components.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.93-101
• /
• 2010

A true random number generator (TRNG) is widely used to generate secure random numbers for encryption, digital signatures, authentication, and so on in crypto-systems. Since TRNG is vulnerable to environmental changes, a deterministic function is normally used to reduce bias and improve the statistical properties of the TRNG output. In this paper, we propose a linear corrector for secure TRNG. The performance of a linear corrector is bounded by the minimum distance of the corresponding linear error correcting code. However, we show that it is possible to construct a linear corrector overcoming the minimum distance limitation. The proposed linear corrector shows better performance in terms of removing bias in that it can enlarge the acceptable bias range of the raw TRNG output. Moreover, it is possible to efficiently implement this linear corrector using only XOR gates, which must have a suitable hardware size for embedded security systems.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2460-2464
• /
• 2008

The present paper suggests new method to know the effects of molecular diffusion and the helicity of microchannel flows on mixing in passive micromixers, which are essential components of a microfluidic chip. In this study, 'Helix Index' is newly defined as the magnitude of chaotic advection. Relationship between Helix Index and Mixing Index is analyzed numerically such as the wide range of Peclet and Reynolds numbers in three dimensional serpentine microchannel when using soluble solutions (water/glycerol). As a result, a simple algebraic equation is derived by this relationship based on a regression analysis. The algebraic equation is found to be able to accurately predict the mixing performance without solving the coupled, complex momentum and mass transfer equations.

• Journal of Industrial Convergence
• /
• v.2 no.1
• /
• pp.187-216
• /
• 2004

After Asian financial crisis hit the Korea, Korean government and Korean firms need to restructure their system. Specially financial sector has to renew its system. One way renew its system was adjust company's labor system. The forms of labor adjustment are external numerical flexibility, externalization, internal numerical flexibility, functional flexibility and wage flexibility. These five forms based on two big categories which are wage flexibility and employment flexibility. This study only focus on th effect of employment flexibility in financial sector in Korea. Employment flexibilities can be practice as employment adjustment. Also we concentrate on separation and re-accessors to other financial institute after the separation. The result shows that Korean financial sector are in the range of 10.78% and the job destruction rates are about 11.26%. During the period from year 1998 to year 2002, the numbers of accession has down about 30%. The logit statistical analysis for separation shows that demographical variables and the reasons of separation affected separation and reemployment.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.16 no.2
• /
• pp.185-193
• /
• 1987

The heat transfer characteristics from a solid sphere in a fluctuating air flow is simulated numerically in the range of the Reynolds numbers, $1\;{\leqslant}\;Re\;{\leqslant}\;40.$ Such a situation may be encountered in forced convection from a heated spherical particle in a sound field or oscillat-ing flow. The amplitude and phase delay in the heat transfer response to the flow oscillation are computed for a small amplitude flow. The instantaneous response of heat transfer is simulated for the large amplitude oscillation and compared with the quasi-steady response. The effect of the oscillation on the time - mean value in the local and overall heat transfer rate is discussed along with the change in the flow .field.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3769-3772
• /
• 2013

Background: To investigate the impact of the lymph node ratio (LNR) on the prognosis of patients with locally advanced rectal cancer undergoing pre-operative chemoradiation. Methods: Clinicopathologic and follow up data of 128 patients with stage III rectal cancer who underwent curative resection from 1996 to 2007 were reviewed. The patients were divided into two groups according to the lymph node ratio: LNR ${\leq}$ 0.2 (n=28), and >0.2 (n=100). Kaplan-Meier and the Cox proportional hazard regression models were used to evaluate the prognostic effects according to LNR. Results: Median numbers of lymph nodes examined and lymph nodes involved by tumour were 10.3 (range 2-28) and 5.8 (range 1-25), respectively, and the median LNR was 0.5 (range, 0-1.6). The 5-year survival rate significantly differed by LNR (${\leq}$ 0.2, 69%; >0.2, 19%; Log-rank p value < 0.001). LNR was also a significant prognostic factor of survival adjusted for age, sex, post-operative chemotherapy, total number of examined lymph nodes, metastasis and local recurrence (${\leq}$ 0.2, HR=1; >0.2, HR=4.8, 95%CI=2.1-11.1) and a significant predictor of local recurrence and distant metastasis during follow-up independently of total number of examined lymph node. Conclusions: Total number of examined lymph nodes and LNR were significant prognostic factors for survival in patients with stage III rectal cancer undergoing pre-operative chemoradiotherapy.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.2
• /
• pp.78-87
• /
• 2008

Received signal strength indicator (RSSI) is used as one of the ranging techniques to locate dynamic sensor nodes in wireless sensor network. Before it can be used for position estimation, RSSI values must be converted to distances using path loss model. These distances among sensor nodes are combined using trilateration method to find position. This paper presents an idea which attempts to integrate both path loss model and trilateration as one algorithm without going through RSSI-distance conversion. This means it is not simply formulas combination but a whole new model was developed. Several advantages were found after integration: it is able to reduce processing load, and ensure that all values do not exceed the maximum range of 16-bit signed or unsigned numbers due to antilog operation in path loss model. The results also show that this method is able to reduce estimation error while inaccurate environmental parameters are used for RSSI-distance conversion.

• Tribology and Lubricants
• /
• v.19 no.5
• /
• pp.292-297
• /
• 2003

The fundamental fluid mechanics associated with the rotation of a smooth plane disk enclosed within a cylindrical chamber have been studied experimentally. In order to acquire systematic information pertinent to this problem torque and friction loss data were obtained over a wide range of disk Reynolds numbers for axial clearance-disk radius ratio H/R from 0.025 to 0.2 and radial tip gap-disk radius ratio s/R from 0.021 to 0.105. Loss analysis of hard disk drive (HDD) is presented to describe the contribution of windage loss of a rotating disk. The minimum loss form factor of HDD can be obtained from this analysis at each operation conditions.