• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.12-17
• /
• 2000

In this study a heavy duty diesel engine was modified into a 11-liter 6-cylinder SPI CNG dedicated engine, which was tested to investigate the performance and exhaust emission under the maximum load condition as the engine speed was increased in the range of 1,000∼2,200 rpm. The exhaust emission was also measured at D-13 mode as well as AVL-8 mode.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.139-140
• /
• 2008

We demonstrate a novel acousto-optic filter using a two-mode photonic crystal fiber. Thanks to endless two-mode operation of the fiber, single notch over a whole spectrum is obtained with tuning range of> 1000 nm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3209-3211
• /
• 1999

We propose a robust Dual-Mode blind equalization algorithm based on Quadrant-partitioned Constant Modulus Algorithm (QCMA) and Modified Constant Modulus Algorithm(MCMA) for QAM demodulation and its performance evaluated. The proposed algorithm show that the stability in setting 2d range and the faster convergence accomplished to conventional Dual-Mode algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.860-863
• /
• 2003

In this paper high power SMU(Source Measurement Unit) having 50V/1.5A source/measure range has been designed and implemented. The SMU has two operation mode, voltage mode and current mode. The SMU can be used as variable voltage source, variable current source, voltage meter, or current meter. Combining two different unit, output power can be doubled as 100V/1.5A. The developed SMU tan be used many semiconductor testing system and electronic device inspecting system.

• 센서학회지
• /
• 제27권3호
• /
• pp.160-164
• /
• 2018

In this paper, a wide dynamic range complementary metal-oxide-semiconductor (CMOS) image sensor with the adjustable sensitivity by using cascode metal-oxide-semiconductor field-effect transistor (MOSFET) and inverter is proposed. The characteristics of the CMOS image sensor were analyzed through experimental results. The proposed active pixel sensor consists of eight transistors operated under various light intensity conditions. The cascode MOSFET is operated as the constant current source. The current generated from the cascode MOSFET varies with the light intensity. The proposed CMOS image sensor has wide dynamic range under the high illumination owing to logarithmic response to the light intensity. In the proposed active pixel sensor, a CMOS inverter is added. The role of the CMOS inverter is to determine either the conventional mode or the wide dynamic range mode. The cascode MOSFET let the current flow the current if the CMOS inverter is turned on. The number of pixels is $140(H){\times}180(V)$ and the CMOS image sensor architecture is composed of a pixel array, multiplexer (MUX), shift registers, and biasing circuits. The sensor was fabricated using $0.35{\mu}m$ 2-poly 4-metal CMOS standard process.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.975-984
• /
• 2018

This work presents a high efficiency phase shifted full bridge (PSFB) DC-DC converter for use in the second stage of a battery charger for neighborhood electrical vehicle (EV) applications. In the design of the converter, Lithium-ion battery cells are preferred due to their high voltage and current rates, which provide a high power density. This requires wide range output voltage regulation for PSFB converter operation. In addition, the battery charger works with a light load when the battery charge voltage reaches its maximum value. The soft switching of the PSFB converter depends on the dead time optimization and load condition. As a result, the converter has to work with soft switching at a wide range output voltage and under light conditions to reach high efficiency. The operation principles of the PSFB converter for the continuous current mode (CCM) and the discontinuous current mode (DCM) are defined. The performance of the PSFB converter is analyzed in detail based on wide range output voltage and load conditions in terms of high efficiency. In order to validate performance analysis, a prototype is built with 42-54 V / 15 A output values at a 200 kHz switching frequency. The measured maximum efficiency values are obtained as 94.4% and 76.6% at full and at 2% load conditions, respectively.

• 한국소음진동공학회논문집
• /
• 제19권10호
• /
• pp.1028-1033
• /
• 2009

To detect faults and monitor thinning on a pipe, many people use ultra sonic sensors that are operated in high frequency range. Because there are many modes in high frequency range, it is difficult to find faults and monitor pipe thinning on a structure. If we deal with signals in a low frequency range which include only A0 wave and S0 wave, the information of monitoring and diagnosis can be easily obtained. In this paper, the technique for exciting low frequency range using ultra sonic sensors is proposed. The main idea of the proposed method comes from the beat phenomenon. The beat frequency is equal to the absolute value of the difference in frequency of the two waves. If the beat frequency is tuned by two ultra waves, we can excite A0 mode and S0 mode of structures. To verify the proposed method, we have performed a steel plate and pipe experiments. Experimental results show that two ultra sonic sensors can well excite low frequency range.

• 한국정보통신학회논문지
• /
• 제17권9호
• /
• pp.2174-2182
• /
• 2013

본 논문에서는 LED 기반 VLC 통신시스템의 기술동향 및 국제표준인 IEEE 802.15.7의 PHY 기술을 분석하였다. 또한, PHY I mode의 세부기술을 분석하고 RS 부호 및 블록 인터리버를 설계함으로써 시스템의 복잡도 분석 및 가시광 무선채널 환경에서의 수신 성능을 분석하였다. 결과에 의하면, Single mode로 운영되는 PHY I의 경우, 짧은 메시지 전송이라는 환경에 비해 시스템 설계의 복잡도가 크다는 것을 확인할 수 있었고, 다중경로 가시광 채널환경에서는 1.5dB의 수신 SNR이 추가적으로 요구됨을 확인할 수 있었다.

• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.1-4
• /
• 2006

Recently, with rapid development of digital media like semiconductor and large flat panel display, the manufacturing equipment is required to have high precision over large travel range. Moreover it should have high product throughput. To achieve high product throughput, a controller should perform fast point-to-point motion and high precision positioning after settling in spite of external disturbances or residual vibrations. We proposed a new mode switching control algorithm with an application to dual stage for long range and high precision positioning. The proposed algorithm uses a proximate time-optimal servomechanism for the fast settling and a time-delay controller for the high precision positioning. Experimental results show that the proposed method enables smooth mode switching and improves the settling time and the precision accuracy after settling by over than 33% and 45%, respectively.

• 한국광학회지
• /
• 제16권6호
• /
• pp.547-552
• /
• 2005

광간섭 단층촬영(OCT)용으로 원통형 압전소자(PZT)와 단일모드 광섬유를 이용한 광경로 지연기를 제작하여 그 특성을 분석하였다. 광경로 지연기에서 발생하는 편광모드 분산은 편광조절기로 조절하였고, 열요동을 2중 광경로 지연기를 구성하여 최소화하였다. 이중 광경로 지연기는 단일 광경로 지연기에 비해 2배의 측정 깊이와 속도를 구현하여 $18.6\pm0.5{\mu}m$의 해상도. 측정 깊이 1.68 mm, 측정 녹도 360.4 mm/s를 각각 얻었다.