• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2010년도 추계학술발표대회
• /
• pp.829-832
• /
• 2010

Wireless Sensor Networks have been proposed for several location-dependent applications. For such systems, the cost and limitations of the hardware on sensing nodes prevent the use of range-based localization schemes that depend on absolute point to point distance estimates. Because coarse accuracy is sufficient for most sensor network applications, solutions in range-free localization are being pursued as a cost-effective alternative to more expensive range-based approaches. In this paper, we proposed a modified DV-Hop (range-free localization) algorithm which reduces node's location error and cumulated distance error by minimizing localization error. Simulation results have verified the high estimation accuracy with our approach which outperforms the classical DV-Hop.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2009년도 추계학술대회 논문집
• /
• pp.529-530
• /
• 2009

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2025-2035
• /
• 2014

The read range of UHF mobile readers can be extended by a booster for mobile RFID readers (BoMR). But in an environment where multiple BoMRs are installed, the read success rate may be decreased due to signal interference. This paper proposes three arbitration methods based on interference estimation with the purpose of enhancing the read success rate. A central arbitration server manages global information in centralized arbitration method (CAM) without broadcast/multicast communication facility. In fully distributed arbitration method (FDAM), all the arbitration messages are broadcasted from a BoMR to every BoMR, and each BoMR decides with broadcasted global information. Events in FDAM are serialized naturally with broadcasted messages. Cluster Distributed Arbitration Method (CDAM) forms clusters with multicasted BoMRs and a selected BoMR acts as an arbiter in the cluster. Such effects as lengthened read range, improved the read success rates of readers can be obtained by the proposed methods without any hardware modification. In order to evaluate the arbitration methods, the RFID system is modeled by using the DEVS formalism and simulated by using the DEVSim++.

• 한국통신학회논문지
• /
• 제37권8A호
• /
• pp.669-678
• /
• 2012

본 논문에서는 H.264/AVC 동영상 부호화 방식을 위한 국부 움직임 벡터 통계 특성을 활용한 정수 화소 단위의 고속 움직임 벡터 예측 기법에 대해 제안한다. 인접 블록들의 움직임 벡터에 의한 통계 특성을 정의하고, 이에 따라 현재 부호화 블록의 움직임 검색 영역의 모드를 결정하는 방식에 대해 기술한다. 더불어, 통계 기반의 움직임 영역 예측에 의한 문제점을 해결하기 위하여 현재 블록과 이전 부호화 블록들의 동일 움직임 검색 영역 모드에 대한 누적 통계를 기반으로 하는 움직임 영역 적응적으로 보정 기법에 대해 제안한다. 실험 결과를 통해 기존 방식과 비교하여 제안 방식의 연산량 절감의 우수성을 확인할 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.625-628
• /
• 2007

We present an efficient and robust technique to estimate the velocity of moving targets from a single SAR image. In SAR images, azimuth image shift is a well known phenomenon, which is observed in moving targets having slant-range velocity. Most methods estimated the velocity of moving targets from the distance difference between the road and moving targets or between ship and the ship wake. However, the methods could not be always applied to moving targets because it is difficult to find the road and the ship wake. We adopted a method estimating the velocity of moving targets from azimuth differentials of range-compressed image. This method is based on an assumption that Doppler center frequency shift of moving target causes a phase difference in azimuth differential values. The phase difference is linearly distorted by Doppler rate due to the geometry of SAR image. The linear distortion is eliminated from phase removal procedure, and the constant phase difference is estimated. Finally, range velocity estimates for moving targets are retrieved. This technique is tested using an ENVISAT ASAR image in which several unknown ships are presented. The theoretical accuracy of this technique is discussed by SAR simulation. The advantages and disadvantages of this method over the conventional method are also discussed.

• 수산경영론집
• /
• 제35권1호
• /
• pp.117-132
• /
• 2004

This study attempts to suggest a new approach of the estimation of range and degree of fisheries damages caused by a large scale of reclamation undertaken in coastal area using the central limit theorem(CLT) in statistics. The key result of the study is the introduction of the new concept of critical variation of environmental factor($d_{c}$). The study defines $d_{c}$ as a standard deviation of the sample mean($\bar{X}$) of environmental factor(X), in other words, $\frac{\sigma}{ \sqrt{n}}$. The inner bound of $d_{c}$ could be the area of fisheries damages caused by public coastal undertaking. The study also defines the decreasing rate of fisheries production$\delta_{\varepsilon}$, in other words, degree of fisheries damages, as the rate of change in the distribution of sample mean(($\bar{X}$), caused by the continuous and constant variation of environmental factor. Therefore $\delta_{\varepsilon}$ can be easily calculated by the use of table of the standardized normal distribution.

• 한국물환경학회지
• /
• 제23권2호
• /
• pp.251-259
• /
• 2007

In this study three log-transformed linear regression models are compared with the focus of bias correction problem. The models are the traditional simple linear regression estimator (SL), the quasi maximum likelihood estimator (QMLE) and the minimum variance unbiased estimator (MVUE). Using such models, suspended solid loads can be estimated using the discharge - suspended solid data set that has been measured by NIER Nakdong River Water Environment Laboratory. As a result, SL shows negative bias for most values of the measured discharge range. QMLE is nearly unbiased for moderate values of the measured discharge range, but shows increasingly positive bias for either large or small value of the measured discharge range. MVUE is unbiased. It is also analyzed how the estimated regression coefficient and exponent are distributed along Nakdong river main stream.

• 센서학회지
• /
• 제26권6호
• /
• pp.371-378
• /
• 2017

An accurate and robust estimation of center of rotation (CoR) using optical marker trajectory is crucial in human biomechanics. In this regard, the performances of the two prevailing least-squares methods, the Gamage and Lasenby (GL) method, and the Chang and Pollard (CP) method, are verified in this paper. While both methods are sphere-fitting approaches in closed form and require no tuning parameters, they have not been thoroughly verified by comparison of their estimation accuracies. Furthermore, while for both methods, results for stationary CoR locations are presented, cases for perturbed CoR locations have not been investigated for any of them. In this paper, the estimation performances of the GL method and CP method are investigated by varying the range of motion (RoM) and noise amount, for both stationary and perturbed CoR locations. The difference in the estimation performance according to the variation in the amount of noise and RoM was clearly shown for both methods. However, the CP method outperformed the GL method, as seen in results from both the simulated and the experimental data. Particularly, when the RoM is small, the GL method failed to estimate the appropriate CoR while the CP method reasonably maintained the accuracy. In addition, the CP method showed a considerably better predictability in CoR estimation for the perturbed CoR location data than the GL method. Accordingly, it may be concluded that the CP method is more suitable than the GL method for CoR estimation when RoM is limited and CoR location is perturbed.

• Journal of Information Processing Systems
• /
• 제8권4호
• /
• pp.621-652
• /
• 2012

Software Estimations provide an inclusive set of directives for software project developers, project managers, and the management in order to produce more realistic estimates based on deficient, uncertain, and noisy data. A range of estimation models are being explored in the industry, as well as in academia, for research purposes but choosing the best model is quite intricate. Estimation by Analogy (EbA) is a form of case based reasoning, which uses fuzzy logic, grey system theory or machine-learning techniques, etc. for optimization. This research compares the estimation accuracy of some conventional data mining models with a hybrid model. Different data mining models are under consideration, including linear regression models like the ordinary least square and ridge regression, and nonlinear models like neural networks, support vector machines, and multivariate adaptive regression splines, etc. A precise and comprehensible predictive model based on the integration of GRA and regression has been introduced and compared. Empirical results have shown that regression when used with GRA gives outstanding results; indicating that the methodology has great potential and can be used as a candidate approach for software effort estimation.

• Journal of the Korean Data and Information Science Society
• /
• 제25권1호
• /
• pp.255-261
• /
• 2014

Many studies have estimated a mixture of binomial distributions. This paper considers an extension, a mixture of shifted binomial distributions, and the estimation of the distribution. The range of each component binomial distribution is rst evaluated and then for each possible value of shifted parameters, the EM algorithm is employed to estimate those parameters. From a set of possible value of shifted parameters and corresponding estimated parameters of the distribution, the likelihood of given data is determined. The simulation results verify the performance of the proposed method.