• 한국환경과학회지
• /
• 제7권4호
• /
• pp.531-540
• /
• 1998

To examine water pollution status of agricultural water source of greenhouse area in Gyeongnam, the ground water quality was investigated six times at five areas in Gyeongnam from October in 1995 to March in 1996. pH of ground water were generally in the range of 5.9∼7.6. But a site in Changnyeong area was out of the range In 6.0∼8.5 which is water quality standard for agriculture. COD of ground water was below 2.8mg/l. NH4+-N contents in ground water was very low in all areas and the average of NO3'-N contents in Changnyeong and Chinju area was high with 13.2 and 11.5mg/l respectively. Hardness, SO42- and EC of ground water In Hmm were higher than any other area. Fe and Mn contents of ground water in Kimhae were higher than any other area with 7.17 and 0.95wt, respectively. Heavy metals such as Cu, Cd, Pb and Zn of ground waker were below water Quality standard far agriculture but some sites were over. Between COD and SS in ground water were not correlated with rInG.338,'but between COD and NH4+, -N were positively correlated. And EC was positively correlated with Ca2+, Mg2+ and SO42-. Ground water pollution status of agricultural water source of greenhouse area in Gyeongnam was genrrally high in order of Sacheon < Chinju < Hmn < Kimhae < Changnyeong.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.75-76
• /
• 2016

This paper proposes a power factor correction circuit with a high efficiency over a wide load range characteristics for a communication power supply. And the characteristic verification is applied to produce a design of prototype. Power factor correction circuit can reduce conduction losses by applying Bridgeless Boost Converter for efficiency. Over a wide load range to maintain the efficient, the control method of a PWM controller is divided by two sections according to the load area. In the low-load region, it was reduced switching losses by applying the critical conduction mode control method. On the other hand, in the heavy-load area, the hysteresis current control method is used to maintain the high efficiency over a wide load range by limiting the peak noise of the inductor.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.254-259
• /
• 2002

A variable air-gap type system is widely used for inductive precision position measurement systems. This type transducer has high sensitivity but lacks a linear measurement range due to structural nonlinearity. Furthermore, as measurement range increases, linearity error is also increased. The alternative is a variable overlap-area type system. The sensitivity of this type is determined by the initial air-gap dimension, keeps the original value and does not deteriorate linearity in spite of the variations of the measuring range.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.1903-1906
• /
• 2003

This paper proposes an adaptive regularized noise smoothing algorithm for range image using the area decreasing flow method, which can preserve meaningful edges during the smoothing process. Although the area decreasing flow method can easily smooth Gaussian noise, it has two problems; ⅰ) it is not easy to remove impulsive noise from observed range data, and ⅱ) it is also difficult to remove noise near edge when the adaptive regularization is used. In the paper, therefore, the second smoothness constraint is addtionally incorporated into the existing regularization algorithm, which minimizes the difference between the median filtered data and the estimated data. As a result, the Proposed algorithm can effectively remove the noise of dense range data with edge preserving.

• KIEAE Journal
• /
• 제10권6호
• /
• pp.3-10
• /
• 2010

The subject is to find green roofs' location as stepping stones in green-network in fine scale. The study site is Junggu, Seoul, which has core areas(Bukaksan and Namsan) and green areas(parks, etc.). Through literature review, the closer to core areas and green areas, target species reach green roof easier, and target species must be avifauna(flying species) and high class in food chain, because of possibility of reaching. So, Great Tits, inhabited in Namsan and urban bird, is target species. The location standard of green roofs, realized birds' reaching distance, consists of home range(horizontal range and vertical range) and roof-greening capable area. The green roofs' distribution of location was resulted through GIS analysis of feasible site finding, and classified with weight of score. In discussion, Namsan gives more effect to locate green roofs than Bukaksan does and selected buildings which are grouped in some parts need to be managed with group, green roof district.

• 한국환경보건학회지
• /
• 제8권1호
• /
• pp.13-23
• /
• 1982

This Study was designed to investigate Traffic condition, Traffic Noise level, Traffic Noise Index (TNI) and Response for dissatisfactions of residents as part of assesment of Noise by 12 Sites in Seoul from July 1st to the end of August 1981. As the resut of this Study, the following Conclusion were obtained 1. The mean traffic Volume of Seoul was 3076/hour ranging 1440/hour to 5772/hour. 2. The range of Road Traffic Noise Level in Residential area was from 73.0dB (A) to 80.2dB (A). The highest level was 80.2dB (A) on Heugseog-dong and the lowest level was 73.0dB (A) on Suyu-dong. 3. Comparision of Road traffic noise level in the day and evening, the range of traffic noise level in day was from 73.9dB (A) to 80.2dB (A), and evening was ranging 73.0 to 79.9dB (A). 4. The range of TNI in Residential area was from 77.5 to 100.0. The highest TNI was 100.0 on Suyu-dong including Heugseog-dong, the lowest TNI was 77.5 on Hyuikyung-dong. 5. Respose of Noise by 360 householders has been examined in Residential Area: Sourse of Noise Causing bothersome to residents was 52.5% of traffic, the types of road traffic Cousing annoyance to residents residents were 84.8% of passing cars and 81.1% of horns, and 71.7% of reading interfered and 68.1% appeal dissatisfactions due to the sleeping disturbance by road traffic noise.

• 한국환경복원기술학회지
• /
• 제13권4호
• /
• pp.65-74
• /
• 2010

This study is for Hanbuk Mountain Range within Gyeonggi province which is to propose the conservation plan by each damage pattern through site survey of the mountain range. The damage patterns are classified by siding, pointing and lining. The total damaged area is 103 areas: The siding pattern is damaged by developing farmland, mineral and quarry mining, dam, large scale development complex and cemetery park; The pointing pattern is including the development of road, transmission tower and way and mountaineering trail; The construction of electricity and communication facility, military facility, mobile communication station, heliport and shelter. The damages by developing road and large scale development complex are the most cause, and military facility, dam and reservoir, and residential area are the main causes, respectively. One of the compromised situation Hanbuk-Mountain Range usage as per section 7 section (18.45%), 12 section (18.45%) is the largest number of compromised has been surveyed, undermine the situation if you look at the usage by the road 25 locations (24.22%), military facilities and dam and reservoir to undermine this 11 established respectively (10.68%) were the most undermine. Therefore, this research propose the conservation plan as follow: first, need to understand, educate and publicize on Hanbuk-Mounatin Range; second, manage through the regulations and ordinance of Gyeonggi province; third build and expand the law for protecting Baekdu-Great Mountain Range.

• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.55-62
• /
• 2017

For evaluating a large caliber ammunition tests, indoor ballistic test range is required to reduce the noise and fragments occurring during the test. To ensure the reliability of the indoor ballistics test range design, we carried out the analysis of the indoor test range using the AUTODYNE hydrodynamic code before its construction. The 120 mm tank ammunition is adopted as a reference model and we analysed the characteristics of the pressure distribution at fire area, the structure design at impact area, the over-pressure applied to the tunnel, and the sabot stopper design. The results of the analysis were applied to the design of the indoor ballistic test range.

• Journal of Welding and Joining
• /
• 제23권5호
• /
• pp.43-48
• /
• 2005

Conventional non-destructive techniques for inspection of the weld in pipelines require significant test time and high cost. Ultrasonic guided waves have been widely studied and successfully applied to various non-destructive tests with advantage of the long-range inspection. In this paper, a study on the application of ultrasonic guided waves to the long-range inspection of the pipeline is presented using a long-range guided wave inspection system, Wavemaker SE16, GUL. The characteristics and setup of the long-range guided wave inspection system and experimental results in pipes of with various diameter are introduced. The experimental results in mock-up pipes with cluster type detects show that the minimum detectable wall thickness reduction with this guided wave system is $2\~3\%$ in the pipe cross section area. And the wall thickness reduction of $5\%$ in cross section area can be detected when actual detection level is used. Therefore, the applicability of the guided wave systeme to long-range inspection of wall thickness reduction in pipes is verified.

• 한국환경복원기술학회지
• /
• 제11권4호
• /
• pp.67-74
• /
• 2008

This study was carried out to select proper species for early stage replantation in cutting-slope area of the Baekdu Range roadside. In the cutting-slope area and upper forest area of the cutting-slope area, sample plots of 104 were selected and their vegetations and environmental factors were investigated. We found total 151 species in the 104 plots. The species of high frequency of Baekdu Range roadside were found in the order of Lespedeza bicolor, Festuca arundinacea, Eragrostis curvula, Pinus densiflora, Salix hulteni, Lespedeza cuneata, Erigeron annuus, Rubus crataegifolius, Spodiopogon sibiricus, etc. The dominancy of Festuca arundinacea, Eragrostis curvula, Lespedeza bicolor, Pinus densiflora, Salix hulteni, Spodiopogon sibiricus, Miscanthus sinensis, Lespedeza maximowiczii, Acer ginnala were 12.74%, 10.43%, 7.48%, 4.42%, 4.09%, 3.13%, 2.49%, 2.45%, 2.40% in the roadside cutting-slope, respectively. The importance value of Quercus mongolica, Lindera obtusiloba, Rhododendron mucronulatum, Lespedeza maximowiczii, Rhododendron schlippenbachii, Lespedeza bicolor, Quercus serrata, Rhus trichocarpa were 17.32%, 13.82%, 11.60%, 11.31%, 8.76%, 8.04%, 7.65%, 7.10% in shrub layer of the upper forest area, respectively. The species of Carex lanceolata, Spodiopogon sibiricus, Carex siderosticta, Miscanthus sinensis, Artemisia sp., Potentilla fragarioides var. major, Astilbe chinensis var. davidii, Chrysanthemum zawadskii var. latilobum, Aster scaber, Lysimachia clethroides, Patrinia villosa, Lindera obtusiloba, Rhododendron mucronulatum, Rhododendron schlippenbachii, Rhus trichocarpa, Stephanandra incisa, Zanthoxylum schinifolium, Lespedeza sp., Lespedeza cuneata, Amorpha fruticosa, Ligustrum obtusifolium, and Weigela subsessilis, may be more helpful in stabilizing of the cutting-slope area and making harmony with the surrounding forest area.