• 대한족부족관절학회지
• /
• 제8권2호
• /
• pp.191-194
• /
• 2004

Purpose: Anatomic configuration of the ankle joint is useful information during various ankle procedures. This study was prospectively designed to investigate the sagittal inclination pattern of the ankle joint. Materials and Methods: Lateral standing ankle radiographs from one-hundred people (age: $17{\sim}68$, M:F=45:55) and magnetic resonance (MR) sagittal ankle images from twenty-four people (age: $16{\sim}65$, M:F=14:10) were studied. Post-traumatic, arthritic, or grossly deformed ankles at any reason were excluded. The posterior inclination angle (PIA) of the distal tibia was measured and compared between the lateral and the medial segment. Results: On plain radiographic data, the average PIA of the distal tibia was $6.14^{\circ}{\pm}3.56^{\circ}$ (range $0^{\circ}$ to $14^{\circ}$) in the lateral segment and $13.16^{\circ}{\pm}3.05^{\circ}$ (range $6^{\circ}$ to $22^{\circ}$) in the medial segment. On MR imaging data, the average PIA of the distal tibia was $5.08^{\circ}{\pm}4.26^{\circ}$ (range $1^{\circ}$ to $10^{\circ})$ in the lateral segment and $10.16^{\circ}{\pm}4.87^{\circ}$(range $5^{\circ}$ to $17^{\circ}$) in the medial segment. The PIA between two segments was significantly different. Conclusion: The sagittal configuration of the medial area ankle joint and the lateral area ankle joint has difference in the degree of posterior inclination and shape of curvature.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2000년도 정기총회 및 특별심포지움
• /
• pp.158-172
• /
• 2000

강원도 삼척시 도계읍 늑구리 남풍갱 부근의 채굴 공동에 의한 지반침하 지역에서 지하구조를 영상화하고자 3차원 탄성파 탐사를 실시하였다. 자료획득에는 Full range 3D 배열을 적용하였고, 자료처리 시 속도분석은 상속도 중하단면을 이용하였으며 정보정은 공통 발파점 및 공통 수진점에 따라 중합한 결과를 토대로 발파점 및 수진점 보정량을 추출, 적용하였다. 남풍갱 지역의 지반침하 양상을 가장 특성있게 표현하는 측선을 선정, 중합단면을 검토한 결과 침하에 의한 전반적인 지반붕괴의 양상을 확인하였다. 데이터의 질이 불량하여 공동의 경계, 크기 등 공동의 기하학적인 정보를 추출하기 위해서 전처리 및 보다 정밀한 속도 분석 및 정보정이 필요할 것으로 사료된다.

• 한국군사과학기술학회지
• /
• 제12권1호
• /
• pp.123-132
• /
• 2009

Civil petitions and law suits against the military rifle shooting noise have been increased because many military shooting ranges are located near civilian residential area. In order to solve the noise problems, military have devised various methods. In this study, propagation properties of rifle shot through atmosphere were investigated. The military rifle shooting noise level at 5m from muzzle was between $l14{\sim}120dB$ in all directions. The noise level loom both backward and sideward away from system firing range consisting lines of 8 shooting locations were 90dB, when shots were all fired within 10 seconds. At present some of military bases established sound barriers, muzzle enclosures, silencers, and indoor shooting ranges to reduce noises and these prevention methods can reduce noise by $5{\sim}20dB,\;5{\sim}9dB,\;5{\sim}13dB,\;40{\sim}50dB$, respectively. Even though indoor shooting range has the best performance, it requires very expensive construction cost and has short length between target and shooter. In comparison, muzzle enclosure is cheap, but because it is installed in fixed position it can only be used in one shooting position. Therefore a commander should select appropriate methods to reduce military rifle shooting noise considering distance from residential area to the range, mission of military training, budget, etc.

• 한국수자원학회논문집
• /
• 제41권10호
• /
• pp.1009-1021
• /
• 2008

본 연구에서는 댐이 하류하천에 미치는 영향권을 산정하기 위하여 수리 수문적, 지형적, 환경 생태적, 사회적 영향의 4개 지표와 38개 항목을 선정하고, 계층분석법을 적용하여 댐의 영향권 산정 지표와 항목의 중요도를 평가하였다. 댐 영향권 산정 지표의 평가결과는 수리 수문적 영향권이 1순위, 환경 생태적 영향권이 2순위, 지형적 영향권 및 사회적 영향권이 각각 3순위와 4순위 이었으며, 항목의 평가결과는 댐설계방류량이 1순위, 하천의 기본 및 계획홍수량이 2순위, 계획홍수량비가 3순위, 유역면적비가 4순위, 하류댐 배수위가 5순위로 평가되었다. 대청댐의 영향권을 산정한 결과, 댐설계방류량 지표는 47.21 km, 하천계획홍수량 지표는 45.71 km, 유역면적비 지표는 13.94 km로 산정되었다.

• Journal of Ecology and Environment
• /
• 제48권2호
• /
• pp.152-162
• /
• 2024

Background: Plant species of the alpine treeline ecotone are highly sensitive to climate change and may adjust their population dynamics, and functional traits in response to changing climate. This study examined regeneration patterns and leaf traits variations in an important treeline ecotone element Rhododendron campanulatum along the elevation gradient in western Nepal to assess its potential adaptive responses to climate change. The distribution range of R. campanulatum (3,400-3,800 m above sea level [a.s.l.]) was divided into five horizontal bands, each with a 100 m elevational range. Eight plots (10 m × 10 m) were sampled in each band, resulting into a total of 40 plots. In each plot, all R. campanulatum individuals and co-occurring tree species were counted. From each elevation, R. campanulatum leaf samples were collected to determine leaf dimensions, leaf density, specific leaf area (SLA), and stomatal density (SD). Results: The density-diameter curve indicated that R. campanulatum was regenerating well, with enhanced regeneration at higher elevation (3,800 m a.s.l.) than at lower. Tree canopy cover appeared to be the major determinant of R. campanulatum regeneration, as indicated by a higher number of seedlings in treeless stands. With increasing elevation, the leaf length, width, SLA, and stomata length decreased but leaf thickness and SD increased. Conclusions: Overall, a higher regeneration and lower SLA with the high SD in the leaves at the upper limit of the species distribution suggested that R. campanulatum is well adapted at its upper distribution range with the possibility of upslope range shift as temperature increases.

• Journal of Radiation Protection and Research
• /
• 제5권1호
• /
• pp.1-6
• /
• 1980

A portable count-ratemeter and a thermoluminescent detector ($CaSO_4:Dy$) have been used to obtain total gamma dose rates at approximately 50 locations during the course of several survey trips in the southeastern Korea. The purposes of these measurement were to provide a future reference data and to establish the approximate range of population exposure to the natural environmental radiation. The natural levels encountered ranged from a low of 14.6 microroentgen per hour to a high of 18.9 microroentgen per hour with a mean of $16.3{\pm}1.0$ microroentgen per hour. Among these results are the relatively high natural dose rate levels in the Masan area and Yangsan-Tongdosa area with the relatively low natural dose rate levels in the Gyeongsan-Cheongdo area and the Samrangjin-Jinyeong-Gimhae area.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.92-100
• /
• 2003

Using a quarter car model, an analytic method for performance estimation of a vehicle suspension system with respect to frequency response, RMS response and performance index is presented. From frequency response function, compromization of response performance to the whole frequency range is verified and from RMS response and performance index, sensitivity of ride md handling characteristics are examined. Using a full car model, sweet area(stable ride area) are determined and performance sensitivity is estimated according to the change of feedback gains. In order to esimate the output sensitivity, response we is displayed using a 3-dimensional contour plot. Design data n suggested for optimal design parameter esimation, which maximize the performance of the given suspension system.

• International Journal of Concrete Structures and Materials
• /
• 제10권2호
• /
• pp.143-147
• /
• 2016

In recent years, some modifications were introduced in the stress-strain relationship of the steel in order to develop a more efficient shear model for reinforced concrete members. The last contribution in this sense corresponding to the Refined Compression Field Theory (RCFT, 2009); this theory proposed a steel constitutive model that has account the tension stiffening area prescribed by technical codes, what simplifies all the design process. However, under certain design conditions supported by such codes, the RCFT model does not provide a real (non-complex) solution for the steel yield strain when the prescribed tension stiffening area is considered; then the load-strain response cannot be computed. In this technical note, the tension stiffening area is fixed in order to guarantee the application of the embedded steel constitutive model for all the standard design range.

• 한국실내디자인학회논문집
• /
• 제19호
• /
• pp.105-113
• /
• 1999

This study investigates the prayer House facilities in Korean Churches and improves them to the positive way in order to revive the church itself. The prayer houses in Korea manages the various facilities and special programs. Theses facilities are used in christian seminars, educations, belief-training for the more non-christian's resort and training center when they could meet the god naturally. The purpose of this paper suggests the condition of the current prayer house facilities and the main organizers. this leads the fundamental data for the patterns of the unit facilities. Methods of study and range are 20 places among Seoul, Kyunggi - do area and analyse document survey, phone interview, drawing analysis, direct visit including the prayer house type, building area, site area, total floor area, location condition as searching items.

• 한국대기환경학회지
• /
• 제17권4호
• /
• pp.299-312
• /
• 2001

The analysis of vent -emitted Hg concentrations and relevant environmental parameters was made from the inlet of 42 ventpipes in Nan-Ji-Do area of Seoul during September/october of 2000. Using these data, the fluxes of Hg from the ventpipes were also derived. The mean concentration of Hg, computed using the data sets collected from 42 ventpipes, was 420$\pm$619ng m$^{-3}$ with the range of 3.45~2,952ng m$^{-3}$ . Because of large differences in concentration levels between two sectors 1 and 2 and between plain and slope areas. evaluation of the data was made by dividing them into four different categories such as plain areas of sectors 1 and 2 (and/or slope areas of sectors 1 and 2). When this classification was applied, the computed fluxes were highly different among each group with the generally enhanced fluxes in plain area relative to slope area. The computed fluxes were then used to make comparative analysis of different source processes in the study area.