• 한국대기환경학회지
• /
• 제24권3호
• /
• pp.367-375
• /
• 2008

To characterize atmospheric particles in Cheonan area, 5 monitoring sites representing highway area, commercial area, residential area, and industrial areas were selected, and the mass concentrations of PM10 and PM2.5 were monitored for 14 days at each site during 2007. The daily average PM10 and PM2.5 concentrations were in the range from 18.5 to $140.9{\mu}g/m^3$ and 8.2 to $116.6{\mu}g/m^3$, respectively, showing the highest mean concentrations at the commercial area site and the lowest concentration at the residential area site. The daily average PM 10 concentrations at Shinan (Commercial area) and Bakseok (Industrial area) sites were exceeded the current National Standard for 1 and 2 days during the monitoring periods. The fractions of PM2.5 in PM10 were above 70% for all sites, indicating fine particles are the major constituent of atmospheric particles in Cheonan. The results indicate that PM10 concentrations in Cheonan are at the concerning level, and the control strategy for fine particles is necessary to address this issue.

• 자원환경지질
• /
• 제23권2호
• /
• pp.135-141
• /
• 1990

A number of alunite and pyrophyllite deposits occur around the Haenam area where Cretaceous volcanic and volcanogenic sediments are widely distributed. The K-Ar ages of alunite, sericite and whole rocks collected from alunite and pyrophyllite deposits and unaltered rocks representing various stratigraphic horizon of the area were determined and their formation stage was discussed. The ages of volcanic rocks range between $68.6{\pm}1.9$ and $94.1{\pm}2.0$ Ma corresponding to Cenomanian-Maastrichtian of upper Cretaceous. Andesitic rock gives $94.1{\pm}2.0$. Rhyolite and acidic tuffs give $79.47{\pm}1.7$ and $82.8{\pm}1.2$ Ma corresponding to Campanian. The later stage andesite gives $68.6{\pm}1.9$ Ma of Maastrichtian. The results suggest that volcanism of the area can be devided into three different stages. The ages of alunite and sericite range $71.8{\pm}2.8$ to $76.6{\pm}2.9$ Ma of late Campanian to early Maastrichtian which is rather earlier than the age of granite(67 Ma). It indicates that the alteration ages of these clay mineral deposits appeared to be related with its volcanism rather than the hydrothermal stage of granite of this area.

• Journal of Preventive Medicine and Public Health
• /
• 제41권5호
• /
• pp.300-306
• /
• 2008

Objectives : This study was performed to compare the standardized mortality ratios among different small areas and to explore the usefulness of standardized mortality ratios in South Korea. Methods : To calculate the standardized mortality ratio (SMR), we obtained the national deaths certificate data (2004-2006) and national registration population data (2003-2006), and these were provided by the National Statistical Office. The small areas (Eup.Myoun.Dong) were based on the subdivisions of counties. Among the 3,580 small areas classified by the National Statistical Office, 3,571 areas were included in this study. The basic statistics and decile distributions of the SMRs for all the regional levels were calculated, and the small area maps were also produced for some selected regions. To evaluate the precision of SMR, we calculated the 95% confidence intervals of the SMR in selected small areas. Results : The mean and the standard deviation of the SMRs among all small areas were 100.8 and 17.0, respectively. The range was 30.6-211.7 and the inter-quartile range was 20.7. Seoul metropolitan city displayed the lowest mean SMR among 16 regions in South Korea, and 34.6 percent of the small area SMRs belonged to the first decile(the lowest group). On the contrary, the mean SMR of Gyeongsangnam province was highest, and 26.1 percent of the small area SMRs belonged to the tenth decile(the highest group). In some areas, the precision of the SMR, which was calculated by the 95% confidence intervals, remained questionable, yet it was quite stable for almost areas. Conclusions : The standardized mortality ratios can be useful for allocating health resources at the small area level in Korea.

• 한국환경과학회지
• /
• 제13권3호
• /
• pp.251-262
• /
• 2004

To identify the characteristics of wastewater flow generated in treatment basins of Seogwipo-city, we selected 3 stations representing the basin and performed 7 times of field survey including 5 times in dry periods and 2 times in wet periods from Feb. 25 to May 27, 2002 for the selected stations. From the analysis of flow data measured for more than 60 days in the interval of 5 minutes and concentration data obtained from laboratory analysis, we can draw several conclusions. First, in the analysis of diurnal variation of wastewater flow for land-use types, we could find the following results: in the residential area, it is observed that wastewater flow rates rise early in the morning for the office-going hour and fall gradually and rise again after the office-leaving hour, showing typical residential wastewater flow pattern, while for the residential and commercial area flow rates rise early in the morning at the office-going hour and move up and down repeatedly within wide range and last till the office-leaving hour, which can be resulted from wastewater that is generated by tourists activated after early in the afternoon, while for the touristy area flow rates rise early in the morning and fall gradually and rise again within wide range. Second, in the analysis of temporal variation of wastewater flow for monthly, it can be observed that in the residential area, in the residential and commercial areas the flow rate of May is higher than that of Feb., March, while for the touristy area flow rate is without monthly because it reflects the movement of population, Third, in wet periods concentration of water-quality item such as SS, BOD, and COD_{cr}$ is high in the beginning of rainfall by first flush, and falls down gradually to reach the steady state, which is the level of wastewater in dry periods after the cease of storm water due to diluting effect resulting from additional runoff water through storm sewers.

• 한국농촌건축학회논문집
• /
• 제20권1호
• /
• pp.61-68
• /
• 2018

This study aims to investigate the changes in area ratios by space through floor plans of national leasing houses constructed by the LH in Jangseong-gun, particularly focusing on the floor plans of public leasing housing complexes built during the 1970s-80s and those during the 2010s. The results are as follows: First, according to the composition ratio of floor plans by period, the type of Bedroom> Livingroom> Common Area> Kitchen+Dining> Multi-purpose room> Bathroom> or the type of Bedroom> Livingroom> Kitchen/Dining> Common Area> Bathroom> Multi-purpose room were found to be high during the 1970s. Whereas, the type of Common Area>Living room(Kitchen/Dining included)>Bedroom>Bathroom>Front Entrance was found to be high during the 2010. It can be concluded that the ratio of Bedroom and Living room was found to be high during the 1970s, but after 2010s, the spacial composition ratio of Common Space, Living room, and Bedroom is getting higher in the order. Second, in terms of the composition ratio of floor plans by the area of unit household, among the floor plan of C-1, B-2, B-3, C-2 which were used since 2010s, the spatial ratio of Bedroom was maintained in the range of 20%; while during the 1970s, the Bedroom space of A-1(46%), A-2(46%), and A-3(41%) was found to be higher than 40%. It can be concluded that the size of bedroom space has doubled over time. In terms of the changes in the spatial ratio of Living room, A-1(15%), A-2(22%), and A-3(23%) were found during the 1970s. Compared to the recent floor plans of C-1(28%), B-2(25%), B-3(33%), and C-2(34%) which are applied in Jangseong-gun, Jeollanam-do province, no big changes have been found, particularly in the small floor plans (20% range).

• 지역연구
• /
• 제33권2호
• /
• pp.47-59
• /
• 2017

도시열섬현상은 기 개발된 도시지역의 온도가 주변지역의 온도보다 높은 현상을 의미한다. 그러나 도시열섬 지역을 구분하기 위한 방법에 대한 기준은 명확하지 않으며, 각 연구에서 활용되는 자료 및 방법에 따라 차이가 있다. 본 연구의 목적은 도시열섬현상에 대한 다양한 정의를 고찰하고, 열섬지역 도출을 위한 각 방법론을 서울시에 적용함으로써 각 방법론에 대한 특징 및 차이를 분석하는 것이다. 열섬의 정의는 활용되는 온도자료에 따라 대기열섬과 지표열섬으로 구분된다. 열섬지역을 도출하는 방법론은 비교방법과 분석의 공간 범위에 따라 차이가 있다. 각 방법론을 서울시를 대상으로 분석한 결과, 온도자료에 따라 서울시의 열섬지역이 다르게 나타남을 확인하였다. 또한, 분석의 공간적 범위에 따라 서울시의 열섬지역 분포 범위가 다름을 확인하였다. 이는 동일한 공간, 동일한 시점을 대상으로 열섬지역을 분석하여도 각 방법론에 따라 열섬지역이 다르게 도출됨을 보여준다. 따라서 본 연구는 향후 도시열섬 문제를 해결하기 위한 기초연구로써 활용될 수 있다.

• 한국산림과학회지
• /
• 제96권3호
• /
• pp.245-250
• /
• 2007

본 연구는 충북 진천의 활엽수림 지역에서 임도의 개설이 소형 설치류에 대한 영향을 파악하기 위해 실시되었다. 임도의 개설로 인해 하층식생의 피도량 증가, 상층 임관의 감소, 소경목의 증가와 같은 서식지의 변화가 발생하였다. 소형 설치류에 대한 포획 결과 두 지역에서 모두 흰넓적다리붉은쥐와 등줄쥐가 포획되었다. 흰넓적다리붉은쥐는 개설지에 비해 미개설지에서 행동권의 크기가 컸으며 포획된 개체수가 적었다. 등줄쥐는 포획 개체수와 평균 체중이 미개설지에 비해 개설지에서 모두 높은 것으로 나타났다. 또한 개설지의 임도 주변에서 많은 개체수의 소형 설치류가 포획된 반면, 미개설지에서는 전 지역에 걸쳐 비교적 고른 분포를 보였다. 임도의 개설은 그 지역에 서식하고 있는 소형 설치류의 개체수, 종 구성 및 서식지 이용 유형에 큰 영향을 미치는 것으로 판단된다.

• 한국의류산업학회지
• /
• 제8권2호
• /
• pp.203-208
• /
• 2006

The purpose of this study is to examine the ergonomic working uniform. Developing a prototype uniform will be the first stage in aiming to create a working uniform in the construction field. This study was conducted using a questionnaire in the construction field of Daegu city, and the data was gathered from 121 questionnaires. Some of the questions that were asked, were about the case of putting on and removing the uniform and if any areas of uniform caused discomfort. The areas of the uniform that caused problems were the waist, knee, shoulder, arm and neck regions. The free range of movement of these regions were restricted and caused the person to feel cramped. The results of the questionnaire called for improvements to the knee, waist, shoulder and crotch area. The prototype that was developed offered more range of movement in the knee and crotch area, while not causing the uniform to be cramped too much during motion. The prototype also improved comfort by raising the waist line of back part, and by having the ability of the uniform to be tightened or loosened with zipper according to the persons preference. The upper area of the uniform was improved by dropping the shoulder seam line which enhanced comfort and also allowed a better fit for the elbow and wrist. The prototypes additional feature included a slit zipper in the sides of the trousers and a gusset in the under arm area to improve breathability and sweat elimination.

• 대한원격탐사학회지
• /
• 제17권2호
• /
• pp.165-181
• /
• 2001

Using a field spectrometer having a spectral range of 0.4$\mu\textrm{m}$~2.5$\mu\textrm{m}$ with a spectral resolution of 1nm, the researchers measured the reflectance of granite, andesitic rocks, sedimentary rocks, and pyrophyllite ore in the Ungsang area, Kyungsang Basin, South Korea. Spectral characteristics of the geological media were investigated from the analysis. The in-situ measured sites were selected in well exposed rock outcrops. In case of unfavorable weather conditions, rocks were sampled and remeasured under natural solar condition. The reflectance of field data was measurd at three sistes for granite, six sites for andesitic rock three sites for sedimentary rocks, and two sites for pyrophyllite ore. The vibrational absorption bands for pyrophyllite are detected in the spectral range of 2.0$\mu\textrm{m}$~2.5$\mu\textrm{m}$. The absorption band for granites in study area is not distinctive. The reflectance measured under normal field conditions showed strong absorption at wavelengths of 1.4$\mu\textrm{m}$ and 1.9$\mu\textrm{m}$ due to the effect of moisture in the atmosphere. After the bands of 1.4$\mu\textrm{m}$ and 1.9$\mu\textrm{m}$ were removed, Hull Quotient method was applied to characterize absorption bands. The reflectances of field data were calculated to estimate the band ratio corresponding to the Landsat TM and EOS Terra ASTER. The researchers suggest here that the TM band2, band3, band4, and band7 or ASTER band2, band3, band4, and band9 are the best combination for discriminating outcrops. The researchers tested and demonstrated using a Landsat TM image in the study area. For geologic applications, decorrelation stretch is also an effective tool to enhance the exposed rock mass in images.

• 제어로봇시스템학회논문지
• /
• 제19권7호
• /
• pp.633-639
• /
• 2013

Several estimation methods used in the range measurement based wireless localization area have individual problems. These problems may not occur according to certain application areas. However, these problems may give rise to serious problems in particular applications. In this paper, three methods, ILS (Iterative Least Squares), DS (Direct Solution), and DSRM (Difference of Squared Range Measurements) methods are considered. Problems that can occur in these methods are defined and a simple hybrid solution is presented to solve them. The ILS method is the most frequently used method in wireless localization and has local minimum problems and a large computational burden compared with closed-form solutions. The DS method requires less processing time than the ILS method. However, a solution for this method may include a complex number caused by the relations between the location of reference nodes and range measurement errors. In the near-field region of the complex solution, large estimation errors occur. In the DSRM method, large measurement errors occur when the mobile node is far from the reference nodes due to the combination of range measurement error and range data. This creates the problem of large localization errors. In this paper, these problems are defined and a hybrid localization method is presented to avoid them by integrating the DS and DSRM methods. The defined problems are confirmed and the performance of the presented method is verified by a Monte-Carlo simulation.