• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2786-2800
• /
• 1997

In this paper, we investigate how well the channel memory (statistical dependence in the occurrence of transmission errors) can be used in the evaluation of widely used error control schemes. For this we assume a special case named as the simplest Markovian block-error pattern with two states, in which each block is classified into two classes of whether the block transmission is in error or not. We apply the derived pattern to the performance evaluation of the practical link-level procedures, LAPB/D/M with multi-reject options, and investigate both throughput and user-perceived response time behaviors on the discrete-time domain to determine how much the performance of error recovery action is improved under burst error condition. Through numerical examples, we show that the simplest Markovian block-error pattern tends to be superior in throughput and delay characteristics to the random error case. Also, instead of mean alone, we propose a new measure of the response time specified as mean plus two standard deviations 50 as to consider user-perceived worst cases, and show that it results in much greater sensitivity to parameter variations than does mean alone.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.408-417
• /
• 1996

In this paper, we quantiatively analyze the broadband CDMA systems with high chip rate, which virually eliminates the multipath fading effects by distinguishing each reflected paths in the process of despreading. We model the broadband multipath propagation channel with random time-variant impulse response as a linear filter of tapped delay line to evaluate the performance of broadband CDMA systems in multipath fading environment. This statistical model, based on extensive experimental data, was established to characterize the urban radio propagation medium in various environments. We perform computer simulation of the transmission and reception of broadband CDMA systems by applying it to abve channel model. From the simulation results, we confirm that the broadband CDMA systems inherenly reduce the effects of multipath fading phenomena which causes to degrade the performance of mobile communication systems, based on the results of eye-diagram and BER curve.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6B
• /
• pp.605-614
• /
• 2009

Existing Internet services were almost supported by the best effort service such as the data transmission service and were allowed the transmission delay and packet loss. However, recent Internet multimedia services such as Internet phone, Internet broadcasting are required a real-time processing and high bandwidth. Therefore, many studies for providing Internet QoS are performed at IETF (Internet Engineering Task Force). As the buffer management mechanism among IP QoS methods, active queue management method such as RED (Random Early Detection) algorithm has proposed. However, RED algorithm has a limitation of usage of an average buffer length and unfairness. So, many algorithms proposed as the modified algorithm of RED. But these modified algorithms also have difficulties to satisfy the requirements of various Internet user QoS. Therefore, in this paper we propose the QoS adaptive AQM (Active Queue Management) algorithm for the multimedia services that request various QoS requirements and present a performance evaluation by the simulations using the ns-2.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.1-8
• /
• 2006

Many researches on path planning and obstacle avoidance for the fundamentals of mobile robot have been done recently. Informations from various sensors can be used to find obstacles and plan feasible path. In spite of many solutions of finding optimal path, each can be applied in only a constrained condition. This means that it is difficult to find university good algorithm. An optimal path with a complicated computation generates a time delay which cannot avoid moving obstacles. In this paper, we propose an algorithm of path planning and obstacle avoidance for mobile robot. We call the proposed method Random Access Sequence(RAS) method. In the proposed method, a small region is set first and numbers are assigned to its neighbors, then the path is selected using these numbers and cumulative numbers. It has an advantage of fast planning time and completeness of path if one exists. This means that new path selection may be possible within short time and that helps a robot to avoid obstacle in dynamic environments. Using the information of the start and destination position, the RAS can be performed for collision-free navigation by reforming feasible paths repeatedly in dynamic environments.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.5
• /
• pp.443-450
• /
• 2000

Before some experiments were carried out with analog bandpass filter which used for filtering the noise included in sound source signal. And this filter was constituted by condenser, register and operational amplifier. Hut these elements made the phase characteristics to differentiate in each sensing channel and cause a little of measurement error. We made new measurement system that was substituted digital filter for the analog filter in order to develop the optimal system which could find the time delay between each sensors with high accuracy. This paper describes the new system's constitution and the function of each parts. Specially three digital filters were designed and applied to the digital signal processing Part. And a series of experiments were carried out with the source＇s distance 9.53meters and the random bearing interval within the limits of $0^{\circ}$ ~ $180^{\circ}$. As a result, we have recognized that the accuracy of measurements were differentiated by the methods what kind of digital filter were adopted. And we have confirmed the facts that IIR LPF was suitable for sound source's bearing measurement and FIR LPF reduced the range measurement error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.587-596
• /
• 2005

In this paper, we propose an OFDMA/CDM-based cellular system, which accommodates multiple users in frequency-domain and multiplexes user data with frequency-domain spreading. The proposed system utilizes random codes to discriminate cells and adopts the pre-equalization to enhance the performance. For cellular applications, a number of pre-equalization techniques are compared and an efficient power allocation scheme is suggested with a transmit power constraint. Especially, the validity of OFDMA/CDM based cellular system is investigated, by comparing the performance for varying the number of multiplexed data symbols at different locations. Finally the pre/post-equalization is proposed to reduce the performance degradation caused by time delay.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.8
• /
• pp.442-450
• /
• 2000

Active noise control is an approach to noise reduction in which a secondary noise source that destructively interferes with the unwanted noise. In general, active noise control systems rely on multiple sensors to measure the unwanted noise field and the effect of the cancellation. This paper develops an approach that utilizes a single sensor. The noise field is modeled as a stochastic process, and a time-adaptive algorithm is used to adaptively estimate the parameters of the process. Based on these parameter estimates, a canceling signal is generated. Opppenheim model assumed that transfer function characteristics from the canceling source to the error sensor is only propagation delay. But this paper proposes a modified Oppenheim model by considering transfer characteristics of acoustic device and noise path. This transfer characteristics is adaptively cancelled by adaptive model. This is proved by computer simulation with artifically generated random noise and sine wave noise. The details of the proposed architecture, and theoretical simulation and experimental results of the noise cancellation system for three dimension enclosure are presented in the paper.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.12
• /
• pp.5191-5211
• /
• 2016

It is essential to satisfy class-specific QoS constraints to provide broadband services for new generation networks. The present study proposes a QoS-driven multicast scheme for wireless networks in which the transmission rate and end-to-end delay are assumed to be bounded during a multiple multicast session. A distributed algorithm was used to identify a cost-efficient sub-graph between the source and destination which can satisfy QoS constraints of a multicast session. The model was then modified as to be applied for wireless networks in which satisfying interference constraints is the main challenge. A discrete power control scheme was also applied for the QoS-aware multicast model to accommodate the effect of transmission power level based on link capacity requirements. We also proposed random power allocation (RPA) and gradient power allocation (GPA) algorithms to efficient resource distribution each of which has different time complexity and optimality levels. Experimental results confirm that the proposed power allocation techniques decrease the number of unavailable links between intermediate nodes in the sub-graph and considerably increase the chance of finding an optimal solution.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.119-126
• /
• 2009

In this paper propose a method to reduce data for collision resolution. It is to reduce a damage of the back off algorithm to apply in both wire and wireless networks. Double back off size can be work in the first and the last movement point service as a same time in IEEE 802.16. It propose of the algorithm to be suited to IEEE 802.16 for increasing network access percentage in increase a data treat, delay error range and random access over fuller condition. In the result of the computer simulation, the proposal algorism give a increasing speed more than under the this paper. From this computer simulation result, we can get the confirmation of the small loss in saturated and saturated could be a longer in last network.

• Journal of Advanced Marine Engineering and Technology
• /
• v.3 no.1
• /
• pp.19-31
• /
• 1979

Recently the adaptive control system, which keeps the control system always optimal by adjusting the control parameters automatically according to the variations of the plant parameters, have become very important in the field of control engineering. The adaptive control systems are usally composed of the plant identification, the decision of the optimal control parameters, and the adjustment of the control parameters. This paper deals with a method of the adaptive control system when PI or PID controller is used in the feed back control system. Its controlled object (the plant) is assumed to be described by the transfer function of $\frac{ke^{-LS}}{1+TS}$ where k, T and L are steady state gain, time constant and pure dead time respectively, and their values are variable in accordance with the change of environmental circumstance. It has been known that a pseudo-random binary signal is quite effective for the measurement of an impulse response of a plant. In adaptive control systems, however, the impulse response itself is not appropriate to determine the control parameters. In this paper, the authors propose a method to estimate directly the parameters of the plant k, T and L by means of the correlation technique using 3 level M-sequence signal as a test signal. The authors also propose a method to determine the optimal parameters of the PI or PID controller in the sense of minimizing the square integral of the control error in the feed back control system, and the values of the optimal parameters are computed numerically for various values of T and L, and the results are examined and compared with those of the conventional methods. Finally the above-mentioned two methods are combined and an algorithm to struct an adaptive control system is suggested. The experiments for the indicial responses by means of both the model of the temperature control system using SCR actuater and the analog simulations have shown good results as expected, and the effectiveness of the proposed method is verified. The M-sequence generator and the time delay circuit, which are manufactured for the experiments, are operated in quite a good condition.