• 제목/요약/키워드: random shock model

검색결과 23건 처리시간 0.026초

한국형 위성 발사체 성능 검증위성의 진동환경에 관한 연구 (A Study on the Vibrational Environment Test of KSLV-1 Demonstration Satellite)

  • 서현석;김홍배;우성현;채장수;오태식
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.966-970
    • /
    • 2005
  • On the basis of the development of KSLV-1, KoDSat was designed and manufactured to demonstrate the performance of KSLV-1. KoDSat is exposed to a severe vibrational environment at launch. The structural reliability of KoDSat has to be verified using vibrational test. The structural compatibility and verification of components between analysis and test can be proved using environmental vibration test. In this paper, we review the structural characteristic of thruster control unit for a space launch vehicle and design TCU housing using mathematical model. In order to verify the structural compatibility and reliability, half-sine shock, random and sing sweep vibration test was performed. Especially, sing sweep vibration test result is compared with analysis result and mathematical model is verified.

  • PDF

형상기억합금 메쉬 와셔를 이용한 우주용 냉각기 진동절연기의 발사 진동 및 충격 저감 성능검증 (Verification of Launch Vibration and Shock Isolation Performance for Spaceborne Compressor Vibration Isolator with SMA Mesh Washer)

  • 이명재;한제헌;오현웅
    • 한국소음진동공학회논문집
    • /
    • 제24권7호
    • /
    • pp.517-524
    • /
    • 2014
  • Micro-vibration induced by on-board equipments such as fly-wheel and cryogenic cooler with mechanical moving parts affects the image quality of high-resolution observation satellite. Micro-vibration isolation system has been widely used for enhancing the pointing performance of observation satellites. In general, the micro-vibration isolation system requires a launch locking mechanism additionally to guarantee the structural safety of mission payloads supported by the isolation system with low stiffness under launch environment. In this study, we propose a passive launch and on-orbit vibration isolation system using shape memory alloy mesh washers for the micro-vibration isolation of spaceborne compressor, which does not require the additional launch locking mechanism. The basic characteristics of the isolator were measured in static and free vibration tests of the isolator, and a simple equivalent model of the isolator was proposed. The effectiveness of the isolator design in a launch environment was demonstrated through sine vibration, random vibration and shock tests.

Comparison of Extracorporeal Shock Wave Therapy Versus Injection Therapy for Shoulder Disorders: A Systematic Review and Meta-Analysis of Randomized Controlled Trials

  • Dajeong Kim;Hyunjoong Kim
    • Physical Therapy Rehabilitation Science
    • /
    • 제12권1호
    • /
    • pp.48-55
    • /
    • 2023
  • Objective: The purpose of this study is to compare the effects of extracorporeal shock wave therapy (ESWT) and injection therapy through qualitative and quantitative analysis by synthesizing randomized controlled trials (RCTs) conducted on patients with various shoulder diseases. Design: A systematic review and meta-analysis of randomized controlled trials Methods: This review conducted a literature search through international electronic databases in January 2023 to compare the effects of ESWT and injection therapy. Qualitative analysis was performed as a risk of bias tool, and quantitative analysis was synthesized with a random effect model to show the effect size as a standardized mean difference (SMD). Results: Five RCTs involving 298 individuals with shoulder disorders were included in this systematic review and meta-analysis. ESWT showed a moderate effect on pain (SMD=-0.44; 95% CI, -0.95 to 0.06) and a large effect on shoulder function (SMD =-0.81; 95% CI, -1.70 to 0.07) than injection therapy. A significant difference was found in the shoulder range of motion, showing a large effect size (SMD=1.50; 95% CI, 0.58 to 2.43). Conclusions: When considering treatment options for the management of patients complaining of shoulder disorders, it is appropriate to recommend ESWT first rather than injection therapy to increase the range of motion of the joint. In addition, ESWT is safe for pain control and shoulder function improvement, and a positive prognosis could be expected.

주택매매가격 영향요인의 비선형적 효과 분석 (An Analysis of Non-linear Effects of Impact Factors on Housing Price)

  • 장영재
    • Journal of the Korean Data Analysis Society
    • /
    • 제20권6호
    • /
    • pp.2953-2966
    • /
    • 2018
  • 주택가격은 거시경제상황을 나타내는 다양한 변수들과 밀접한 관계를 지니고 있다. 다수의 선행연구에서는 경제상황 변화 하에서의 주택가격 행태나 여러 변수들과의 관계성에 초점을 맞추고 있다. 본 논문에서는 선행연구를 참고하되 데이터에 근거한 새로운 시각의 실증분석을 실시하고자 하였다. 주택가격에 미치는 잠재적 영향요인들 중 정책금리에 초점을 맞추고 금리충격에 대한 여타 주요 변수들의 비선형적 반응 행태를 분석하였다. 데이터마이닝 기법 중 하나인 랜덤 포레스트 알고리즘을 이용하여 선행연구에서 제시되었던 거시경제변수들의 변수 중요도 점수를 산출하였다. 이 과정을 통해 변수를 선택한 뒤, 비선형성을 포착할 수 있는 모형을 사용하여 충격반응을 산출하였다. 동 모형에 따르면 주택가격의 경우에 있어서 금리 인상 시에만 충격반응이 유의미하게 나타났다. 특히 기존 전통적 VAR(vector autoregression) 방법론에서 포착하지 못한 비선형적 특징에 기인하여 금리 인상 충격의 크기가 커질 경우 그 효과가 정률적으로만 증가하는 것이 아니라 그 이상 증폭될 수 있다는 분석 결과를 얻었다. 이러한 파급효과의 비선형성, 비대칭성은 정책 수단으로서의 금리를 보다 신중한 시각에서 접근해야 함을 의미한다고 하겠다.

Thermal and Dynamical Evolution of a Gaseous Medium and Star Formation in Disk Galaxies

  • 김창구;김웅태
    • 천문학회보
    • /
    • 제36권1호
    • /
    • pp.54.1-54.1
    • /
    • 2011
  • Formation of self-gravitating gas clouds and hence stars in galaxies is a consequence of both thermal and dynamical evolution of a gaseous medium. Using hydrodynamics simulations including cooling and heating explicitly, we follow simultaneously thermal and dynamical evolution of galactic gas disks to study dynamics and structures of galactic spiral shocks with thermal instability and regulation of the star formation rates (SFRs). We first perform one-dimensional simulations in direction perpendicular to spiral arms. The multiphase gas flows across the arm soon achieve a quasi-steady state characterized by transitions from warm to cold phases at the shock and from cold to warm phases in the postshock expansion zone, producing a substantial fraction of intermediate-temperature gas. Next, we allow a vertical degree of freedom to model vertically stratified disks. The shock front experiences unsteady flapping motions, driving a significant amount of random gas motions, and self-gravity promotes formation of bound clouds inside spiral arms. Finally, we include the star formation feedback in both mechanical (due to supernova explosion) and radiative (due to FUV heating by young stars) forms in the absence of spiral arms. At saturation, gravitationally bound clouds form via thermal and gravitational instabilities, which are compensated by disruption via supernova explosions. We find that the FUV heating regulates the SFRs when gas surface density is low, confirming the prediction of the thermal and dynamical equilibrium model of Ostriker et al. (2010) for star formation regulation.

  • PDF

헬기 탑재용 전자장비의 동특성 분석 절차 (Dynamic Characteristic Analysis Procedure of Helicopter-mounted Electronic Equipment)

  • 이종학;권병현;박노철;박영필
    • 한국소음진동공학회논문집
    • /
    • 제23권8호
    • /
    • pp.759-769
    • /
    • 2013
  • 기동중인 헬리콥터는 공기역학적인 현상에 의하여 발생하는 불규칙 진동과 회전날개의 작동으로 인한 정현파 진동이 합성되어 발생하는 진동, 작업 및 착륙 시 발생하는 충격, 그리고 갑작스런 기동 시 발생하는 가속도와 같은 동적 하중에 노출 된다. 이때 발생하는 진동과 같은 동적 하중은 기체내부로 전달되어 헬리콥터운용에 필요한 전자장비를 가진 한다. 과거에 이러한 현상을 최소화하기 위하여 진동크기 감쇠시키기 위한 완충기를 전자장비의 장착대에 적용하여 왔다. 그러나 헬리콥터의 경우, 저주파에서 정현파 가진이 발생하므로 완충기 적용은 오히려 장착 플레이트 및 전자장비 부품의 파손을 발생시킬 수 있다. 이 연구에서는 완충기를 제거한 장착대를 동적 하중에 강건하며 전자장비에 전달되는 진동크기를 최소화 하도록 설계하였다. 완충기를 제거한 장착 대를 적용 시, 무게와 부피를 획기적으로 줄일 수 있으며 전자장비를 기체에 체결하는 나사 수가 적어짐에 따라 체결작업에 필요한 시간이 감소되는 장점을 갖는다. 최적화 해석에 적용되는 동적 하중을 선정하기 위하여 진동, 충격, 가속도하중을 비교 분석하여 가장 결정적인 동적 하중인 진동에 의한 하중을 선정하였다. 전체모델 유한요소 해석을 통하여 전자장비의 동적 거동을 분석하고 최적화 해석에 필요한 단순화 모델을 구축하였으며, 모달 테스트를 통해서 동특성을 검증하였다. 위상 최적화를 적용하여 강성대비 체적비가 큰 장착대의 형상을 도출한 후 고유진동수, 응력을 제약조건으로 무게가 최소화 되도록 하는 파라미터 최적화를 수행하여 장착대의 최종 형상 및 치수를 결정하였다. 개선모델은 체적 및 질량이 약 13 % 감소하였으며 사용시간은 규격대비 9.2배 증가하였다. 마지막으로 최적화된 장착대를 운용중인 실제 장비에 적용하여 진동환경에 대한 안정성을 평가하였다.

열충격이 작용하는 세라믹구조의 신뢰성 평가 (Reliability Evaluation of Ceramic Structures Under Thermal Shocks)

  • 김종태;심확섭;장건익;이치우;이환우
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.954-958
    • /
    • 1996
  • An analysis method for the reliability of ceramic structures subjected to thermal shocks is presented, Flaws with the size of given probability distribution function are assumed to be distributed at random with a certain density per unit volume in the structures. Criterions for crack instability are derived for brittle solids under general thermal stresses. A probabilistic failure model is presented to study the probability of crack instability for blittle solids containing cracks with uncertain crack size. The reliabilities of brittle structures are evaluated based on the weakest-link hypothesis, which states that a structure fails when the cracks in any differential volume become unstable. A numerical example is given to demonstrate the application of the proposed method.

  • PDF

Do Roads Enhance Regional Trade? Evidence Based on China's Provincial Data

  • RAHMAN, Imran Ur;SHARMA, Buddhi Prasad;FETUU, Enitilina;YOUSAF, Muhammad
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제7권12호
    • /
    • pp.657-664
    • /
    • 2020
  • We investigate the impact of roads and highways within the provinces on the regional trade of China using the augmented Gravity Model and theory of modeling trade. We take a panel data covering 31 provinces of China over 20 years period (1998-2017) for the estimations. We apply ARMA-OLS model, fixed and random effects, and robust findings by Hausman test. The results imply that road and highway lengths within the provinces have a significantly positive impact on the value of the province-wise exports. The positive impact is due to the fact the increased coverage of roads and highways increase accessibility to resources and mobility of goods and services within the regions. Moreover, employment in the transportation sector, per capita GDP and population of the provinces also illustrate positive and significant influence on regional exports and trade. The impact of China's WTO accession on regional exports has been positive, while the financial crisis has had a negative impact. The year dummies show that, in the years following the financial crisis, China was able to regress from the external shock as trade within the provinces increased. The increase in exports after financial crisis is mainly due to the government policies and support to every province.

초소형위성 HAUSAT-1의 기계시스템 설계 및 개발 (Mechanical System Design and Development of the HAUSAT-1 Picosatellite)

  • 황기룡;민명일;문병영;장영근
    • 한국항공우주학회지
    • /
    • 제32권9호
    • /
    • pp.103-113
    • /
    • 2004
  • 위성은 조립 및 시험 완료 후 운반 및 발사 순간부터 임무 궤도로 진입할 때까지 발사체에 의한 정하중, 동하중 및 충격하중을 겪게 되며, 임무궤도에서 열진공, 복사 및 미세중력 환경하에 놓이게 되어 위성의 설계, 제작, 조립 및 시험 시 이들 발사환경과 우주환경을 고려하여 개발을 수행하여야 한다. 본 논문에서는 HAUSAT-1 피코위성의 구조 열해석과 설계 결과를 논의하고, 발사 과정과 우주에서 겪게 되는 환경을 모사한 발사환경 및 우주환경시험의 결과를 논의한다. HAUSAT-1 위성의 기계시스템은 인증 수준의 진동시험과 열진공시험 후에도 안정하다는 것을 확인하였다.

기총 폭발 하중에 대한 모델 수립과 구조 해석에 관한 연구 (A Study on Model Establishment and Structural Analysis for Gun Blast Load)

  • 김대관;한재흥;장재호
    • 한국항공우주학회지
    • /
    • 제33권7호
    • /
    • pp.33-39
    • /
    • 2005
  • 총구로부터 방출되는 폭발파에 대한 수학적 모델(GUNBLAST)을 수립하였으며, 폭발 하중에 대한 구조 응답 해석을 수행하였다. 폭발파는 자유영역 폭발파와 반사 폭발파로 구분되어질 수 있다. 본 연구에서는 스케일 기법을 이용하여 자유영역 폭발파 모델을 수립하였으며, 경사 충격파 이론과 전산유체역학(Computational Fluid Dynamics) 계산을 통하여 반사 충격파를 계산하였다. GUNBLAST는 두 가지의 구조 모델에 적용되었으며 구조 표면으로부터의 총구거리 변화에 따른 폭발파 특성을 파악하기 위하여 평판에 대한 적용을 통하여 균일하중조건과의 비교를 수행하였다. 또한 MSC/NASTRAN을 이용하여 12.7mm 기총을 장착한 비행기 날개 모델의 과도 응답 해석을 수행하였다. 결과적으로 이러한 폭발파는 랜덤진동과 항공기에 탑재된 장비에 고주파의 손상을 일으킬 수 있음을 확인하였다.