• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.999-1004
• /
• 2014

In the present paper, the effects of initial crack location on spatial randomness of fatigue crack growth resistance (FCGR) in friction stir welded (FSWed) AA7075-T651 plates were studied. The objective of this study is to characterize the statistical properties of FCGR for three different types of initial crack location (ICL) specimens. In this work, the FCGR coefficients were treated as a spatial random process. It was found that the FCGR coefficients for all initial crack location specimens closely followed a two parameter Weibull distribution. The shape parameter of the Weibull distribution for BM-ICL specimens showed the largest value of 7.50, and that for the WM-ICL specimens showed the smallest value of 2.61. In addition, the autocorrelation functions for all the ICL specimens followed the exponential function.

• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.25-48
• /
• 1996

Mixed Model Assembly Lines (MMALs) are increasingly used to produce differentiated products on a single assembly line without work-in-process storage, Usually, a typical MMAL consists of a number of (1) stations doing exactly the same operation on every job, (2) stations involving operations with different choices, and (3) stations offering operations that are not performed on every job, or that are performed on every job but with many options. For stations of the first type there is no sequencing problem at all. However, for the second type a set-up cost is incurred each time the operation switches from one choice to another. At the third type of stations, different models, requring different amounts and choices of assembly work, creates an uneven flow of work along the line and variations in the work load at these stations. When a subsequence of jobs requires more work load than the station can handle, it is necessary to help the operations at the station or to complete the work elsewhere. Therefore, a schedule which minimize the sum of set-up cost and utility work cost is desired. So this study has developed Fixed Random Ordering Rule (FROR), Fixed Ascending Ordering Rule (FAOR), Fixed Descending Ordering Rule, and Extended NHR (ENHR). ENHR is to choose optimal color ordering of each batch with NHR, and to decide job sequence of the batch with it, too. As the result of experiments, ENHR was the best heuristic algorithm. NHR is a new heuristic rule in which only the minimum addition of violations from both partial sequence and unassigned sequence at every branch could be considered. And this is a heuristic sequencing rule for the third type of stations at MMAL. This study developed one more heuristic algorithm to test the performance of NHR, which is named as Practical Heuristic Rule (PHR).

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.6
• /
• pp.19-30
• /
• 2016

The projection of climate-related range shift is critical information for conservation planning of Korean fir (Abies koreana E. H. Wilson). We first modeled the distribution of Korean fir under current climate condition using five single-model species distribution models (SDMs) and the pre-evaluation weighted ensemble method and then predicted the distributions under future climate conditions projected with HadGEM2-AO under four $CO_2$ emission scenarios, the Representative Concentration Pathways (RCP) 2.6, 4.5, 6.0 and 8.5. We also investigated the predictive uncertainty stemming from five individual algorithms and four $CO_2$ emission scenarios for better interpretation of SDM projections. Five individual algorithms were Generalized linear model (GLM), Generalized additive model (GAM), Multivariate adaptive regression splines (MARS), Generalized boosted model (GBM) and Random forest (RF). The results showed high variations of model performances among individual SDMs and the wide range of diverging predictions of future distributions of Korean fir in response to RCPs. The ensemble model presented the highest predictive accuracy (TSS = 0.97, AUC = 0.99) and predicted that the climate habitat suitability of Korean fir would increase under climate changes. Accordingly, the fir distribution could expand under future climate conditions. Increasing precipitation may account for increases in the distribution of Korean fir. Increasing precipitation compensates the negative effects of increasing temperature. However, the future distribution of Korean fir is also affected by other ecological processes, such as interactions with co-existing species, adaptation and dispersal limitation, and other environmental factors, such as extreme weather events and land-use changes. Therefore, we need further ecological research and to develop mechanistic and process-based distribution models for improving the predictive accuracy.

• Health Policy and Management
• /
• v.16 no.2
• /
• pp.21-48
• /
• 2006

As prior studies indicate that chronic diseases are mainly attributed to health behavior, preventive health care rather than treatment for illness needs to improve health status. Since chronic conditions require long-term therapy, health care expenditures to treat chronic diseases have been substantial burden at national level. In this point of view, this study suggests that the health promotion program should be based on Knowledge Based System Using Data Mining Technique, we developed a predictive model for preventive healthcare management on diabetes mellitus. Generally, in the outbreak of diabetes mellitus there is a difference in lifestyle and the risk factors according to gender. So we developed a predictive model in accordance with gender difference and applied the Logistic Regression Model based on Data Mining process. The result of the study were as follow. The lift of the last predictive model was an average 2.23 times(male model : 2.13, female model 2.33) more improved than in the random model in upper 10% group. The health risk factors of diabetes mellitus are gender, age, a place of residence, blood pressure, glucose, smoking, drinking, exercise rate. On the basis of these factors, we suggest the program of the health promotion.

• Computers and Concrete
• /
• v.15 no.5
• /
• pp.771-794
• /
• 2015

This paper proposes an innovative method for selection of measurement sets in static parameter identification of concrete or steel bridges. This method is proved as a systematic tool to address the first steps of Structural System Identification procedures by observability techniques: the selection of adequate measurement sets. The observability trees show graphically how the unknown estimates are successively calculated throughout the recursive process of the observability analysis. The observability trees can be proved as an intuitive and powerful tool for measurement selection in beam bridges that can also be applied in complex structures, such as cable-stayed bridges. Nevertheless, in these structures, the strong link among structural parameters advises to assume a set of simplifications to increase the tree intuitiveness. In addition, a set of guidelines are provided to facilitate the representation of the observability trees in this kind of structures. These guidelines are applied in bridges of growing complexity to explain how the characteristics of the geometry of the structure (e.g. deck inclination, type of pylon-deck connection, or the existence of stay cables) affect the observability trees. The importance of the observability trees is justified by a statistical analysis of measurement sets randomly selected. This study shows that, in the analyzed structure, the probability of selecting an adequate measurement set with a minimum number of measurements at random is practically negligible. Furthermore, even bigger measurement sets might not provide adequate SSI of the unknown parameters. Finally, to show the potential of the observability trees, a large-scale concrete cable-stayed bridge is also analyzed. The comparison with the number of measurements required in the literature shows again the advantages of using the proposed method.

• Wind and Structures
• /
• v.19 no.3
• /
• pp.339-352
• /
• 2014

This paper discusses the appropriate duration for basic gust wind speeds in wind loading codes and standards, and in wind engineering generally. Although various proposed definitions are discussed, the 'moving average' gust duration has been widely accepted internationally. The commonly-specified gust duration of 3-seconds, however, is shown to have a significant effect on the high-frequency end of the spectrum of turbulence, and may not be ideally suited for wind engineering purposes. The effective gust durations measured by commonly-used anemometer types are discussed; these are typically considerably shorter than the 'standard' duration of 3 seconds. Using stationary random process theory, the paper gives expected peak factors, $g_u$, as a function of the non-dimensional parameter ($T/{\tau}$), where T is the sample, or reference, time, and ${\tau}$ is the gust duration, and a non-dimensional mean wind speed, $\bar{U}.T/L_u$, where $\bar{U}$ is a mean wind speed, and $L_u$ is the integral length scale of turbulence. The commonly-used Durst relationship, relating gusts of various durations, is shown to correspond to a particular value of turbulence intensity $I_u$, of 16.5%, and is therefore applicable to particular terrain and height situations, and hence should not be applied universally. The effective frontal areas associated with peak gusts of various durations are discussed; this indicates that a gust of 3 seconds has an equivalent frontal area equal to that of a tall building. Finally a generalized gust response factor format, accounting for fluctuating and resonant along-wind loading of structures, applicable to any code is presented.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.91-98
• /
• 2009

This paper presents a solution to error avalanche of deciphering where radio noise brings random bit errors in encrypted image data under ubiquitous environment. The image capturing module is to be made comprising data compression and encryption features to reduce data traffic volume and to protect privacy. Block cipher algorithms may experience error avalanche: multiple pixel defects due to single bit error in an encrypted message. The new fault tolerant scheme addresses error avalanche effect exploiting a three-dimensional data shuffling process, which disperses error bits on many frames resulting in sparsely isolated errors. Averaging or majority voting with neighboring pixels can tolerate prominent pixel defects without increase in data volume due to error correction. This scheme has 33% lower data traffic load with respect to the conventional Hamming code based approach.

• Structural Engineering and Mechanics
• /
• v.38 no.1
• /
• pp.39-63
• /
• 2011

Referring to the formulation of physical stochastic optimal control of structures and the scheme of optimal polynomial control, a nonlinear stochastic optimal control strategy is developed for a class of structural systems with hysteretic behaviors in the present paper. This control strategy provides an amenable approach to the classical stochastic optimal control strategies, bypasses the dilemma involved in It$\hat{o}$-type stochastic differential equations and is applicable to the dynamical systems driven by practical non-stationary and non-white random excitations, such as earthquake ground motions, strong winds and sea waves. The newly developed generalized optimal control policy is integrated in the nonlinear stochastic optimal control scheme so as to logically distribute the controllers and design their parameters associated with control gains. For illustrative purposes, the stochastic optimal controls of two base-excited multi-degree-of-freedom structural systems with hysteretic behavior in Clough bilinear model and Bouc-Wen differential model, respectively, are investigated. Numerical results reveal that a linear control with the 1st-order controller suffices even for the hysteretic structural systems when a control criterion in exceedance probability performance function for designing the weighting matrices is employed. This is practically meaningful due to the nonlinear controllers which may be associated with dynamical instabilities being saved. It is also noted that using the generalized optimal control policy, the maximum control effectiveness with the few number of control devices can be achieved, allowing for a desirable structural performance. It is remarked, meanwhile, that the response process and energy-dissipation behavior of the hysteretic structures are controlled to a certain extent.

• Journal of Powder Materials
• /
• v.23 no.3
• /
• pp.235-239
• /
• 2016

This study is performed to fabricate a Ti porous body by freeze drying process using titanium hydride ($TiH_2$) powder and camphene. Then, the Ti porous body is employed to synthesize carbon nanotubes (CNTs) using thermal catalytic chemical vapor deposition (CCVD) with Fe catalyst and methane ($CH_4$) gas to increase the specific surface area. The synthesized Ti porous body has $100{\mu}M$-sized macropores and $10-30{\mu}m$-sized micropores. The synthesized CNTs have random directions and are entangled with adjacent CNTs. The CNTs have a bamboo-like structure, and their average diameter is about 50 nm. The Fe nano-particles observed at the tip of the CNTs indicate that the tip growth model is applicable. The specific surface area of the CNT-coated Ti porous body is about 20 times larger than that of the raw Ti porous body. These CNT-coated Ti porous bodies are expected to be used as filters or catalyst supports.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.7
• /
• pp.1053-1060
• /
• 2010

Cordyceps militaris, an entomopathogenic fungus belonging to the class Ascomycetes, has been reported to have beneficial biological activities such as hypoglycemic, anti-inflammatory, antitumor, antimetastatic, hypolipidemic, immunomodulatory, and antioxidant effects. In this study, the crude water-soluble polysaccharide CMP, which was obtained from the fruiting body of C. militaris by hot water extraction and ethanol precipitation, was fractionated by DEAE-cellulose and Sepharose CL-6B column chromatographies. This process resulted in three polysaccharide fractions, termed CMP Fr I, CMP Fr II, and CMP Fr III. Of these fractions, CMP Fr II, with an average molecular mass of 127 kDa, was able to upregulate effectively the phenotypic functions of macrophages such as NO production and cytokine expression. The chemical property of the stimulatory polysaccharide, CMP Fr II, was determined based on its monosaccharide composition, which consisted of glucose (56.4%), galactose (26.4%), and mannose (17.2%). Its structural characteristics were investigated by a combination of chemical and instrumental analyses, including methylation, reductive cleavage, acetylation, Fourier transform infrared spectroscopy (FTIR), and gas chromatography-mass spectrometry (GCMS). Results indicated that CMP Fr II consisted of the (1${\rightarrow}$4) or (1${\rightarrow}$2) linked glucopyranosyl or galactopyranosyl residue with a (1${\rightarrow}$2) or (1${\rightarrow}$6) linked mannopyranosyl, glucopyranosyl, or galactopyranosyl residue as a side chain. The configuration of the ${\beta}$-linkage and random coil conformation of CMP Fr II were confirmed using a Fungi-Fluor kit and Congo red reagent, respectively.