• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.199-208
• /
• 2014

Code division multiple access (CDMA) is one of the promising medium access control (MAC) schemes for underwater acoustic sensor networks because of its robustness against frequency-selective fading and high frequency-reuse efficiency. As a way of performance evaluation, sea or lake experiment has been employed along with computer simulation.. In this study, we design the underwater CDMA forward-link transceiver and evaluate the feasibility aginst harsh underwater acoustic channel in water-tank first. Then, based on the water-tank experiment results, we improved the transceiver and showed the improvements in a lake experiment. A pseudo random noise code acquisition process is added for phase error correction before decoding the user data by means of a Walsh code in the receiver. Interleaving and convolutional channel coding scheme are also used for performance improvement. Experimental results show that the multiplexed data is recovered by means of demultiplexing at receivers with error-free in case of two users while with less than 15% bit error rate in case of three and four users.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.379-388
• /
• 2014

We noted that substituting hard disk with high-performance storage device on SAN did not immediately result in getting high performance. Investigating the reason behind this leaded us to propose optimization schemes for high-performance storage system. We first got rid of the latency in the I/O process which is unsuitable for the high-performance storage device, added parallelism on the storage server, and applied temporal merge to Superhigh speed network protocol for improving the performance with small random I/O. The proposed scheme was implemented on the SAN with high-performance storage device and we verified that there were about 30% reduction on the I/O delay latency and 200% improvement on the storage bandwidth.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.67-75
• /
• 2011

This paper presents a new test technique for evaluating performance of vehicle detectors with interval estimation, not the conventional point estimation, for presenting statistical confidence interval. The methodology is categorized into three parts; sampling plan, analysis on the characteristic of evaluation indices, and the expression of evaluation results. Even though many statistical sampling plans exist, stratified random sampling is regarded as the most appropriate one, considering the detector performance characteristics that varies with traffic, illumination, and meteorological conditions. No magic bullet exists for evaluation index for detector evaluation, hence the characteristics of evaluation indices were thoroughly analyzed and a reasonable process for choosing the best evaluation index is proposed. Finally, the methodology to express the result of detector evaluation for the entire evaluation period and individual analysis interval is represented, respectively. To overcome the existing drawbacks in point estimation, interval estimation by which statistical confidence interval can be represented is introduced for enhancing statistical reliability of traffic detector evaluation. This research can make vehicle detector scheme improve one step forward.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.115-122
• /
• 2016

OBJECTIVES : This study develops an evaluation method, which is useful to inspect pavement condition of specific boroughs. This is because pavement condition is broadly divided into five grades via visual inspection, which does not consider the types of deteriorations, and is decided by an investigator having a subjective viewpoint. This visual inspection method is not a satisfactory method for accurate maintenance when various deteriorations occur. METHODS : The performance model considers several factors such as crack, rutting, and IRI. This method is also modified from borough SPI based on SPI (Seoul Pavement Index). Considering limited budget of borough, PI (prediction index) is suggested, which is related to the grade of pavement condition evaluation and type of materials. Practical correlation review is also conducted with statistical verification by using the Monte Carlo simulation. RESULTS : The results of the study show that modified criteria are reasonable. First, the comparison between the visual inspection result and the SPI result indicates that the R-square value is sufficiently high. Second, through the common section, each evaluation method could be compared, and the result shows considerable similarity, which increases when the range is modified. Finally, PI for predicting remaining life and the random number SPI have common parts, which means that each indicator would be adequate to be used as an evaluation method. CONCLUSIONS : Comparison and analysis results show that the developed evaluation method is reasonable for specific boroughs where financial support is inadequate for the evaluation process by using the newer equipment. Moreover, for more accurate evaluation method, previous visual inspection data should be utilized, and the database of inspection equipment have to be collected.

• Journal of Broadcast Engineering
• /
• v.22 no.4
• /
• pp.473-483
• /
• 2017

Since the advent of 3D and UHD contents, demand for high-quality panoramic images has been increasing. The UWV(Ultra-Wide Viewing) service uses a wider viewing angle than conventional panoramas to provide a lively experience for users and enhance their understanding of the event. In this paper, we propose a spatial adjacency map generation method and an UWV file storage format technology to provide UWV service. The spatial adjacency map measures the similarity between images and generate the position information of the images based on similarity. And the stitching time of the image can be shortened through the generated position information. Through the spatial adjacency map, we generate the large screen content quickly. The UWV file format which is based on ISOBMFF process spatial adjacency map and videos and support random access. In this paper, we design the UWV player to verify the spatial adjacency map and UWV file format and show the result of experiments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.430.2-430.2
• /
• 2016

The front transparent conductive oxide (TCO) films in thin fill solar cell should exhibit high transparency, conductivity, good surface morphology and excellent light scattering properties. The light trapping phenomenon is limited due to random surface structure of TCO films. The proper control of surface structure and uniform cauliflower TCO films may be appropriate for efficient light trapping. We report light trapping scheme of ICP-RIE glass texturing by SF6/Ar plasma for high roughness and haze ratio of ITO films. It was observed that the variation of etching time, pattern size and Ar flow ratio during ICP-RIE process were important factors to improve the diffused transmittance and haze ratio of textured glass. The ICP-RIE textured glass showed low etching rates due to the presence of metal elements like Al, B, F and Na. The ITO films deposited on textured glass substrates showed the high RMS roughness and haze ratio in the visible wavelength region. The change in surface morphology showed negligible influence on electrical and structural properties of ITO films. The ITO films with high roughness and haze ratio can be used to improve the performance of thin film solar cells.

• International Journal of Knowledge Content Development & Technology
• /
• v.5 no.1
• /
• pp.15-32
• /
• 2015

This article analyzes motivations behind social sciences blog posts citing journal articles in order to find out whether blog citations are good indicators for the societal impact or benefits of research. A random sample of 300 social sciences blog posts (out of 1,233 blog posts) from ResearchBlogging.org published between 01/01/2012 to 18/06/2014 were subjected to content analysis. The 300 blog posts had 472 references including 424 journal articles from 269 different journals. Sixty-one (22.68%) of all cited journals were from the social sciences and most of the journals with high frequency were highly cited general science journals such as PNAS and Science. Seventy-five percent of all journals were referenced only once. The average age of articles cited at the time of citation was 5.8 years. Discussion and criticism were the two main categories of motivations. Overall, the study shows the potential of blog citations as an altmetric measure and as a proxy for assessing the research impact. A considerable number of citation motivations in blogs such as disputing a belief, suggesting policies, providing a solution to a problem, reacting to media, criticism and the like seemed to support gaining societal benefits. Societal benefits are considered as helping stimulate new approaches to social issues, or informing public debate and policymaking. Lower self-citation (compared to some other altmetric measures such as tweets) and the fact that blogging involves generating content (i.e. an intellectual process) give them an advantage for altmetrics. However, limitations and contextual issues such as disciplinary differences and low uptake of altmetrics, in general, in scholarly communication should not be ignored when using blogs as a data source for altmetrics.

• Journal of Korea Water Resources Association
• /
• v.50 no.1
• /
• pp.17-28
• /
• 2017

A recent increase in extreme weather events and flash floods associated with the enhanced climate variability results in an increase in climate-related disasters. For these reasons, various studies based on a high resolution weather radar system have been carried out. The weather radar can provide estimates of precipitation in real-time over a wide area, while ground-based rain gauges only provides a point estimate in space. Weather radar is thus capable of identifying changes in rainfall structure as it moves through an ungauged basin. However, the advantage of the weather radar rainfall estimates has been limited by a variety of sources of uncertainty in the radar reflectivity process, including systematic and random errors. In this study, we developed an ensemble radar rainfall estimation scheme using the multivariate copula method. The results presented in this study confirmed that the proposed ensemble technique can effectively reproduce the rainfall statistics such as mean, variance and skewness (more importantly the extremes) as well as the spatio-temporal structure of rainfall fields.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.137-146
• /
• 2016

In recent years, business environment is faced with multi uncertainty that have not been suffered in the past. As supply chain is getting expanded and longer, the flow of information, material and production is also being complicated. It is well known that development service industry using application software has various uncertainty in random events such as supply and demand fluctuation of developer's capcity, project effective date after winning a contract, manpower cost (or revenue), subcontract cost (or purchase), and overrun due to developer's skill-level. This study intends to social contribution through attempts to optimize enterprise's goal by supply chain management platform to balance demand and supply and stochastic programming which is basically applied in order to solve uncertainty considering economical and operational risk at solution supplier. In Particular, this study emphasizes to determine allocation of internal and external manpower of developers using S&OP (Sales & Operations Planning) as monthly resource input has constraint on resource's capability that shared in industry or task. This study is to verify how Stochastic Programming such as Markowitz's MV (Mean Variance) model or 2-Stage Recourse Model is flexible and efficient than Deterministic Programming in software enterprise field by experiment with process and data from service industry which is manufacturing software and performing projects. In addition, this study is also to analysis how profit and labor input plan according to scope of uncertainty is changed based on Pareto Optimal, then lastly it is to enumerate limitation of the study extracted drawback which can be happened in real business environment and to contribute direction in future research considering another applicable methodology.

• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1376-1384
• /
• 2016

Computers require analytic and processing capability for all possibilities of human expression in order to process sentences like human beings. Linguistic information processing thus forms the initial basis. When analyzing a sentence syntactically, it is necessary to divide the sentence into components, find obligatory arguments focusing on predicates, identify the sentence core, and understand semantic relations between the arguments and predicates. In this study, the method applied a case frame dictionary based on The Korean Standard Dictionary of The National Institute of the Korean Language; in addition, we used a CRF Model that constructed subcategorization of predicates as featured in Korean Lexical Semantic Network (UWordMap) for semantic role labeling. Automatically tagged semantic roles based on the CRF model, which established the information of words, predicates, the case-frame dictionary and hypernyms of words as features, were used. This method demonstrated higher performance in comparison with the existing method, with accuracy rate of 83.13% as compared to 81.2%, respectively.