• Microbiology and Biotechnology Letters
• /
• v.39 no.1
• /
• pp.93-96
• /
• 2011

It has been shown that a nucleotide substitution at position 770 in Escherichia coli 16S rRNA, which is implicated in forming the evolutionary conserved B2c intersubunit bridge, has a detrimental effect on ribosome function. In order to isolate second-site revertants that complement ribosomes containing C770G, we performed a random mutagenesis of the 16S rRNA gene and selected clones that could produce more CAT protein translated by specialized ribosome. One of the clones contained two nucleotide substitutions at positions 569 and 904 (C569G and U904C) and these mutations partially complemented the loss of protein-synthesis ability caused by C770G. Further studies using the isolated revertant will provide information about which part of 16S rRNA is interacting with C770 and the consequence of the structure formed by these interactions in the process of protein synthesis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.261-261
• /
• 2016

플래시 메모리 (flash memory)는 DRAM(dynamic racdom access memory)이나 SRAM(static random access memory)에 비해 소자의 구조가 매우 단순하기 때문에 집적도가 높아서 기기의 소형화가 가능하다는 점과 제조비용이 낮다는 장점을 가지고 있다. 또한, 전원을 차단하면 정보가 사라지는 DRAM이나 SRAM과 달리 전원이 꺼지더라도 저장된 정보가 지워지지 않는다는 특징을 가지고 있어서 ROM(read only memory)과 정보의 입출력이 자유로운 RAM의 장점을 동시에 가지기 때문에 활용도가 크다. 또한, 속도가 빠르고 소비전력이 작아서 USB 드라이브, 디지털 TV, 디지털 캠코더, 디지털 카메라, 휴대전화, 개인용 휴대단말기, 게임기 및 MP3 플레이어 등에 널리 사용되고 있다. 특히, 낸드(NAND)형의 플래시 메모리는 고집적이 가능하며 하드디스크를 대체할 수 있어 고집적 음성이나 화상 등의 저장용으로 많이 쓰이며 일정량의 정보를 저장해두고 작업해야 하는 휴대형 기기에도 적합하며 가격도 노어(NOR)형에 비해 저렴하다는 장점을 가진다. 최근에는 smart watch, wearable device 등과 같은 차세대 디스플레이 소자에 대한 관심이 증가함에 따라 투명하고 유연한 메모리 소자에 대한 연구가 다양하게 진행되고 있으며 유리나 플라스틱과 같은 기판 위에서 투명한 플래시 메모리를 형성하는 기술에 대한 관심이 높아지고 있다. 전하트랩형 (charge trap type) 플래시 메모리는 플로팅 게이트형 플래시 메모리와는 다르게 정보를 절연막 층에 저장하므로 인접 셀간의 간섭이나 소자의 크기를 줄일 수 있기 때문에 투명하고 유연한 메모리 소자에 적용이 가능한 차세대 플래시 메모리로 기대되고 있다. 전하트랩형 플래시메모리는 정보를 저장하기 위하여 tunneling layer, trap layer, blocking layer의 3층으로 이루어진 게이트 절연막을 가진다. 전하트랩 플래시 메모리는 게이트 전압에 따라서 채널의 전자가 tunnel layer를 통해 trap layer에 주입되어 정보를 기억하게 되는데, trap layer에 주입된 전자가 다시 채널로 빠져나가는 charge loss 현상이 큰 문제점으로 지적된다. 따라서 tunnel layer의 막질향상을 위한 다양한 열처리 방법들이 제시되고 있으며, 기존의 CTA (conventional thermal annealing) 방식은 상대적으로 높은 온도와 긴 열처리 시간을 가지고, RTA (rapid thermal annealing) 방식은 매우 높은 열처리 온도를 필요로 하기 때문에 플라스틱, 유리와 같은 다양한 기판에 적용이 어렵다. 따라서 본 연구에서는 기존의 열처리 방식보다 에너지 전달 효율이 높고, 저온공정 및 열처리 시간을 단축시킬 수 있는 마이크로웨이브 열처리(microwave irradiation, MWI)를 도입하였다. Tunneling layer, trap layer, blocking layer를 가지는 MOS capacitor 구조의 전하트랩형 플래시 메모리를 제작하여 CTA, RTA, MWI 처리를 실시한 다음, 전기적 특성을 평가하였다. 그 결과, 마이크로웨이브 열처리를 실시한 메모리 소자는 CTA 처리한 소자와 거의 동등한 정도의 우수한 전기적인 특성을 나타내는 것을 확인하였다. 따라서, MWI를 이용하면 tunnel layer의 막질을 향상시킬 뿐만 아니라, thermal budget을 크게 줄일 수 있어 차세대 투명하고 유연한 메모리 소자 제작에 큰 기여를 할 것으로 예상한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.329-337
• /
• 2001

It has been known that the leakage current in the low field region consists of the dielectric relaxation current and intrinsic leakage current, which cause the charge loss in dynamic random access memory (DRAM) storage capacitor using (Ba,Sr)TiO$_{3}$ (BST) thin film. Especially, the dielectric relaxation current should be seriously considered since its magnitude is much larger than that of the intrinsic leakage current in giga-bit DRAM operation voltage (~IY). In this study, thermally stimulated current (TSC) measurement was at first applied to investigate the activation energy of traps and relative evaluation of the density of traps according to process change. And, through comparing TSC to early methods of I-V or I-t measurement and analyzing, we identify the origin of the dielectric relaxation current and investigate the reliability of TSC measurement. First, the polarization condition such as electric field, time, temperature and heating rate was investigated for reliable TSC measurement. From the TSC measurement, the energy level of traps in the BST thin film has been investigated and evaluated to be 0.20($\pm$0.01) eV and 0.45($\pm$0.02) eV. Based on the TSC measurement results before and after rapid thermal annealing (RTA) process, oxygen vacancy is concluded to be the origin of the traps. TSC characteristics with thermal annealing in the MIM BST capacitor have shown the same trends with the current-voltage (I-V) and current-time (I-t) characteristics. This means that the TSC measurement is one of the effective methods to characterize the traps in the BST thin film.

• Journal of Periodontal and Implant Science
• /
• v.47 no.5
• /
• pp.264-272
• /
• 2017

Purpose: This study evaluated trends in tooth extraction due to acute and chronic periodontal disease (PD) using data from the National Health Insurance Service-National Sample Cohort for 2002-2013. Methods: A random sample of 1,025,340 individuals was selected as a representative sample of the population, and a database (DB) of diagnostic and prescription codes was followed up for 12 years. We used multivariate logistic regression analysis to assess the incidence of total extraction (TE), extraction due to periodontal disease (EPD), and immediate extraction due to periodontal disease (IEPD) according to sociodemographic factors (sex, age, household income, health status, and area of residence). Results: The incidence of tooth extraction was found to be increasing, and at a higher rate for TE in PD patients. In 2002, 50.6% of cases of TE were caused by PD, and this increased to 70.8% in 2013, while the number of cases of IEPD increased from 42.8% to 54.9% over the same period. The incidence rates of extraction due to acute and chronic PD increased monotonically. We found that the incidence rates of TE, EPD, and IEPD were all 2-fold higher among patients with high income levels and those who were not beneficiaries of health insurance. Conclusions: The rates of TE, EPD, and IEPD have been steadily increasing despite dental healthcare policies to expand public health insurance coverage, increasing the accessibility of dental clinics. Moreover, the effects of these policies were found to vary with both income and education levels. Consistent patient follow-up is required to observe changes in trends regarding tooth extraction according to changes in dental healthcare policies, and meticulous studies of such changes will ensure optimal policy reviews and revisions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.7
• /
• pp.995-1002
• /
• 2013

The effect of conjugated linoleic acid (CLA) feeding on growth performance and fatty acid profiles in thigh meat of broiler chicken was investigated using meta-analysis with a total of 9 studies. Overall effects were calculated by standardized mean differences between treatment (CLA fed) and control using Hedges's adjusted g from fixed and random effect models. Meta-regression was conducted to evaluate the effect of CLA levels. Subgroups in the same study were designated according to used levels of CLA, CP levels or substituted oils in diets. The effects on final body weight, weight gain, feed intake and feed conversion ratio were investigated as growth parameters. Total saturated and unsaturated fatty acid concentrations and C16:0, C18:0, C18:2 and C18:3 concentrations in thigh meat of broiler chicken were used as fatty acid profile parameters. The overall effect of CLA feeding on final weight was negative and it was only significant in fixed effect model (p<0.01). Significantly lower weight gain, feed intake and higher feed conversion ratio compared to control were found (p<0.05). CLA feeding on the overall increased total saturated fatty acid concentration in broilers compared to the control diet (p<0.01). Total unsaturated fatty acid concentration was significantly decreased by CLA feeding (p<0.01). As for individual fatty acid profiles, C16:0, C18:0 and C18:3 were increased and C18:2 was significantly decreased by CLA feeding (p<0.01). In conclusion, CLA was proved not to be beneficial for improving growth performance, whereas it might be supposed that CLA is effective modulating n-6/n-3 fatty acids ratio in thigh meat. However, the economical compensation of the loss from suppressed growth performance and increased saturated fatty acids with the benefit from enhanced n-6/n-3 ratio should be investigated in further studies in order to propose an appropriate use of dietary CLA in the broiler industry.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1621-1621
• /
• 2001

The quality of sugarcane grown on the NE Australian tropical coast ($16^{\circ}$15'- $18^{\circ}$15' S Lat.) has declined markedly in the past seven years. This has been linked to dilution of mill-supply cane with increasing levels of non mature-stalk material consisting of leaves and sucker culms. The prime research objective was to examine the transition from the pre-harvest, in-field crop to harvested material sent for processing, in terms of quality and crop fraction proportions. A secondary objective was to quantify the effects of preharvest-season crop habit and culm condition on crop quality. Ten quadrat samples from each of 54 random crop sites (17 in 1999 and 37 in 2000), covering a wide range of variables (cultivar, crop class, and edaphic, topographic, climatic, and temporal factors) were collected immediately before harvest. Samples were partitioned into four fractions:- sound and unsound mature stalks (culms), sucker culms, and extraneous matter (leaves). Material harvested from each site was sampled and partitioned into four fractions:- sound and unsound billets (culm pieces), culm-spindle pieces, and leaf. In 2000, before harvest, 14 additional sites were sampled monthly, on three occasions, from March - June. Erect and non-erect culms were divided into sound and unsound classes. All samples were disintegrated and presented to a remote reflectance module of a scanning spectrophotometer using the BSES large cassette module. Near infra-red spectroscopic (NIS) analyses were developed for the rapid determination of quality components (Brix, commercial cane sugar (CCS), fibre, moisture, and polariscope reading). Calibrations for three material groups (culm (n = 639), non-culm (n = 496), and combined) were developed for all components using the 1999 data set. Two sub-sets (n = 178, and 190) of about 10% of the preharvest-season and harvest populations scanned in 2000 also were subjected to full routine laboratory analyses. The 1999 combined calibrations were excellent, but the culm calibrations produced consistently lower standard errors. Non-culm calibrations were marginally better than the combined for only CCS and pol. reading. Analysis of the 2000 culm data with calibrations using all 1999 and 2000 culm data resulted in better predictions relative to the 1999 culm calibrations. This also was true for the combined calibrations. Assessment of quality components in pre- and post-harvest sugarcane using NIS calibrations was more cost effective than using routine laboratory techniques. Outcomes from this NIS-facilitated research will have important economic consequences for the Australian sugarcane industry. Potential CCS present in mature culms is being discounted by dilution with leaves and sucker culms, threatening farm viability. The results question the efficacy of current harvesting technology. The CCS of harvested cane is improved only marginally over that of the in-field crop. Current harvesting technology requires either supplementary, innovative pre-mill processing or a design revolution to improve mill-supply cane quality, and therefore whole of industry economics. NIS-facilitated analyses, before the harvest season, highlighted the benefits of growing erect, sound crops. Loss of CCS then, can be minimized only by a combination of crop improvement and agronomic solutions, applied as part of sound on-farm management.

• Journal of Korean Public Health Nursing
• /
• v.5 no.2
• /
• pp.45-51
• /
• 1991

The purpose of this study is to investigate the stress and coping level as a result of dysmenorrhea which was experienced by girls. For the collection of data, the girls from the 1st to the 3rd grade in middle school in Seoul were selected through a random sampling technique. The survey was conducted from the 1st. to the 14th of June, 1991 by the use of questionnaires made after a pilot study. The final subjects for analysis were restricted to only those who had experienced me~arche, the number of which totaled 1,131. The stress, coping level, and other variables, were tested and analysed by descriptive statistics (eg, frequency, percentage, mean and standard deviation), t-test, ANOVA and Pearson's correlation coefficients. The obtained results are summarized as follows. 1. The chronological start for menarche was at a mean age of 13.1 The respondents who had experienced menarche numbered $70.9\%$ of the 1st grades and $96.2\%$ of the 2nd grades in middle school, otherwise the starting age for menarche was in the 4th grade in primary school. 2. Their menstrual cycle and period were longer than adult's one. The number of students studied who had experienced dysmenorrhea during their menstrual cycle were 860, and 650 of those revealed that their mothers or sisters had experienced similar problems. 3. The subjects who were late or head left early rather than being absent from school every menstruation cycle were more stressful. The results are thought to show that the girl's perception of dysmenorrhea seems to be more sensitive than adult's one. 4, A significant negative correlation was found between the perception of menstrual flow and strees level. It means that an increase in the stress of dysmenorrhea was associated with decreased menstrual bleeding. The degree of hypochondrical concern assessed by the girls was significantly correlated to stress and coping level. When the girls perceived high stress as a result of dysmenorrhea, they worried about their physical health more. The above results lead us to the suggestion that the starting point of early education with a school program is appropriate for the 4th grade in primary school. Especially if the girls in middle school should be required to give the information about correct knowledge and sufficient self -care management of menstruation monthly, if this could be implemented the loss in school days among the students due to dysmenorrhea would be minimized with more ease.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.427-434
• /
• 2020

This study was conducted to investigate the effects of dietary supplementation with condensed molasses soluble (CMS), which has economically benefitted as an alternative ingredient of molasses, on growth performance and meat quality in growing-finishing pigs. A total of 160 cross-bred growing pigs (LY×D) having body weight 27.3±1.78 kg, were allotted to 1 of the 4 treatment groups with 4 replications each, in a completely random block design. The experimental diet consisted of a basal diet (CON), with supplementation of molasses 3% (MOL 3.0), CMS 1.5% (CMS 1.5), and CMS 3% (CMS 3.0) to basal diet. Feed and water were provided ad libitum for 70 days. We observed higher feed intake in the MOL 1.5, CMS 1.5, and CMS 3.0 groups than CON group. The final body weight and weight gain were significantly improved in the CMS 3.0 group (p<0.05), as compared to CON group. Evaluation of the meat quality revealed no significant difference in water holding capacity, heating loss, and pH, among all experiment groups. This study indicates that feeding CMS results in improved growth performance in growing-finishing pigs without deterioration in meat quality, and has the potential to be used as an alternative ingredient of molasses in swine feed.

• The Journal of Engineering Geology
• /
• v.26 no.4
• /
• pp.485-495
• /
• 2016

To reinforce and improve the soft ground under a breakwater while using materials efficiently, the replacement ratio and leaving periods of surcharge load are optimized probabilistically. The results of Bayesian updating of the random variables using prior information decrease uncertainty by up to 39.8%, and using prior information with more samples results in a sharp decrease in uncertainty. Replacement ratios of 15%-40% are analyzed using First Order Reliability Method and Monte Carlo simulation to optimize the replacement ratio. The results show that replacement ratios of 20% and 25% are acceptable at the column jet grouting area and the granular compaction pile area, respectively. Life cycle costs are also compared to optimize the replacement ratios within allowable ranges. The results show that a range of 20%-30% is the most economical during the total life cycle. This means that initial construction cost, maintenance cost and failure loss cost are minimized during total life cycle. Probabilistic analysis for leaving periods of shows that three months acceptable. Design optimization with respect to life cycle cost is important to minimize maintenance costs and retain the performance of the structures for the required period. Therefore, more case studies that consider the maintenance costs of soil structures are necessary to establish relevant design codes.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.421-426
• /
• 2010

Due to the ease of deployment and the extended coverage, wireless mesh networks (WMNs) are gaining popularity and research focus. For example, the routing protocols that enhance the throughput on the WMNs and the link quality measurement schemes are among the popular research topics. However, most of these works assume that the locations of the mesh routers are predetermined. Since the operators in an Indoor mesh network can determine the locations of the mesh routers by themselves, it is essential to the WMN performance for the mesh routers to be initially placed by considering the performance issues. In this paper, we propose a mesh router placement scheme based on genetic algorithms by considering the characteristics of WMNs such as interference and topology. There have been many related works that solve similar problems such as base station placement in cellular networks and gateway node selection in WMNs. However, none of them actually considers the interference to the mesh clients from non-associated mesh routers in determining the locations of the mesh routers. By simulations, we show that the proposed scheme improves the performance by 30-40% compared to the random selection scheme.