• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.8
• /
• pp.710-718
• /
• 1991

In this pape, an analysis approach for the performance of serial search burst-format direct sequence spread-spectrum code acquisiion system using matched filter is presented. And an acquistion system using analog matched filter is analyzed by this approach. And special consideration is focused on the effect of the code autocorelation sideobes. The basic idea of thi approach is the constuction of state tansition digram at the time of random packet arrival and the calculation of the packet loss probability, which is deveoped in terms of the following parameters: the false alarm probability. the etection probability, and the probability of receiver blocking obtained from the blocked customers cleae queeing system model. The analysis results reveal that the performance of the acquisition system is degraded by the effet of the code autocorrelation sidelobes above a certain value of SN/chip.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.3
• /
• pp.224-236
• /
• 2002

In this paper, a comparative study on the performance of two-phase and three-phase randomized pulse position PWM scheme for mitigation of audible switching acoustic noise in motor drives is done. In the randomized Pulse Position PW, each of two-Phase or three-phase PWM Pulses is located randomly in each switching interval. Simulation and experimental efforts were executed to investigate the spread effects of Power spectra of inverter output voltage, waveforms of ripple current and audible switching acoustic noise. As results, two-phase RP% scheme is more effective from the viewpoint of switching loss and ease of implementation while the three-phase RPWM scheme is more effective from the viewpoint of the spread effects of power spectra. Also, from the view point of the audible switching acoustic noise in motor drives, two-phase and three-phase RPW schemes are nearly the same.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1372-1382
• /
• 1999

The major source of errors in high-speed networks such as Broadband ISDN(B-lSDN) is buffer overflow during congested conditions. These congestion errors are the dominant sources of errors in 1high-speed networks and result in cell losses. Conventional communication protocols use error detection and retransmission to deal with lost packets and transmission errors. However, these conventional ARQ(Automatic Repeat Request) methods are not suitable for the high-speed networks since the transmission delay due to retransmissions becomes significantly large. As an alternative, we have presented a method to recover consecutive cell losses using forward error correction(FEC) in ATM(Asynchronous Transfer Mode)networks to reduce the problem. The performance estimation based on the cell discard process model has showed our method can reduce the cell loss rate substantially. Also, the performance estimations in ATM networks by interleaving and IP multicast service are discussed.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.1
• /
• pp.1-10
• /
• 2010

This was conducted to investigate the dietary assessment, food preferences, snack intake, priority order in food purchase, and knowledge of diet of full-time housewives and working housewives through the use of a questionnaire. The participants (127 working housewives and 86 housewives) were selected at random from Seoul and its vicinity. The predominant job reported by working housewives was saleswomen and specialized job (20.7%). The average monthly income of both housewives and working housewives ranged from 3,000,000 to 5,000,000 won. Forty percent of housewives consumed more meat, fish, eggs, beans, and tofu, while 50.0% of housewives ate vegetables other than kimchi at every meal, 51.2% of housewives consumed one serving of fruit and one cup of fruit juice, 45.3% of housewives consumed three regular meals, and 60.5% of housewives consumed a balanced diet when compared with working housewives (p<0.05). Working housewives consumed beverages, ice cream, milk, and dairy products, while housewives consumed breads, sweet potato, potato, and fruit as snacks. The preference that most often led to food selection was flavor among working housewives (67.7%) and housewives (64.0%). Both working housewives and housewives always confirmed the day of food production. Generally, housewives were more interested in learning about food, creating a dietary plan, nutrient loss during cooking and reducing waste food when compared with working housewives. Housewives appeared to have better dietary assessment and knowledge than working housewives. Accordingly, it is advisable to prepare more systemic education programs for working housewives.

• Journal of Communications and Networks
• /
• v.8 no.4
• /
• pp.451-460
• /
• 2006

Since low earth orbit (LEO) satellite constellations have important advantages over geosynchronous earth orbit (GEO) systems such as low propagation delay, low power requirements, and more efficient spectrum allocation due to frequency reuse between satellites and spotbeams, they are considered to be used to complement the existing terrestrial fixed and wireless networks in the evolving global mobile network. However, one of the major problems with LEO satellites is their higher speed relative to the terrestrial mobile terminals, which move at lower speeds but at more random directions. Therefore, handover management in LEO satellite networks becomes a very challenging task for supporting global mobile communication. Efficient and accurate methods are needed for LEO satellite handovers between the moving footprints. In this paper, we propose a new seamless handover management scheme for LEO satellites (SeaHO-LEO), which utilizes the handover management schemes aiming at decreasing latency, data loss, and handover blocking probability. We also present another interesting handover management model called satellite mobility pattern based handover management in LEO satellites (PatHO-LEO) which takes mobility pattern of both satellites and mobile terminals into account to minimize the handover messaging traffic. This is achieved by the newly introduced billboard manager which is used for location updates of mobile users and satellites. The billboard manager makes the proposed handover model much more flexible and easier than the current solutions, since it is a central server and supports the management of the whole system. To show the performance of the proposed algorithms, we run an extensive set of simulations both for the proposed algorithms and well known handover management methods as a baseline model. The simulation results show that the proposed algorithms are very promising for seamless handover in LEO satellites.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.43-48
• /
• 2008

Power consumption during test can be much higher than that during normal operation since test vectors are determined independently. In order to reduce the power consumption during test process, a new BIST(Built-In Self Test) architecture is proposed. In the proposed architecture, test vectors generated by an LFSR(Linear Feedback Shift Resister) are transformed into the new patterns with low transitions using Bit Generator and Bit Dropper. Experiments performed on ISCAS'89 benchmark circuits show that transition reduction during scan testing can be achieved by 62% without loss of fault coverage. Therefore the new architecture is a viable solution for reducing both peak and average power consumption.

• Food Science of Animal Resources
• /
• v.40 no.3
• /
• pp.338-349
• /
• 2020

The effects of organic Zn-L-selenomethionine (Zn-L-SeMet) at 0.3 ppm on carcass composition, meat characteristics, fatty acid composition, glutathione peroxidase activity, and ribonucleotide content were compared against the commercial inorganic sodium selenite (Na-Se) and the combination of the two, in commercial broilers. A total of 540 one day-old chicks were assigned at random to 3 dietary treatments : i) commercial inorganic selenium as control or T1, ii) a 1:1 ratio of inorganic and organic selenium as T2, and iii) organic selenium as T3. Carcass composition, meat characteristics, cholesterol content, fatty acid composition, and ribonucleotide content were generally unaffected by treatments. However, discrepancy were significantly observed in glutathione peroxidase activity (GSH-Px) and water holding capacity, with organic selenium showing higher glutathione peroxidase activity (p<0.01) and lower shrinkage loss (p<0.05), respectively. These findings could be explained by the contribution of organic selenium in bioavailability of GSH-Px. However, having conducted in a commercial close house system with sufficient amount of nutritional supplementation, the present study demonstrated little or no effects of organic Zn-L-SeMet on meat characteristics, fatty acid composition, and ribonucleotide content (flavor characteristic) in broiler chickens.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.9
• /
• pp.4327-4333
• /
• 2016

Purpose: To systematically review efficacyand safety of robotic gastrectomy (RG) compared with conventional laparoscopic gastrectomy (LG) for gastric carcinoma. Materials and Methods: A systematic literature search was carried out using PubMed, Cochrane Library, CBM, CNKI, WanFang, VIP and other sources like relevant references to obtain comparative studies assessing the effectiveness and safety between RG and LG published between 2013 and 2016. Then the literature was screened and the data were extracted by 2 independent reviewers. The quality of the literature was assessed, and the data analyzed using Stata/SE 14 software. Fixed effects or random effects models wereapplied according to heterogeneity. Results: A total of 12 non-randomized observational clinical studies involving 3,580 patients were included, of which 1,096 had undergone RG and 2,484 had received LG. The results of the meta-analysis showed in terms of effectiveness, RG was associated with less blood loss, less time to first flatus and greater number of harvested lymph nodes, but there were no significant differences in proximal and distal resection margins, compared with LG. In terms of efficiency, RG was associated with shorter hospital stay, but longer operative time. In terms of safety, there were no statistically significant differences in complications, mortality and conversions between RG and LG. Conclusions: RG can achieve comparable or better short-term and radical effects than LG, with respect to effectiveness, efficiency and safety in treatment of gastric carcinoma. Future studies involving RG should focus on decreasing operative time and reducing cost. Moreover, there is a need for randomized controlled trials comparing the two techniques with long-term follow-up.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.272-275
• /
• 2014

An improved fuzzy Kalman filtering speed estimation scheme was proposed by means of measuring stator side voltage and current value based on vector control state equation of induction motor. The designed fuzzy adaptive controller conducted recursive online correction of measurement noise covariance matrix by monitoring the ratio of theory residuals and actual residuals to make it approach real noise level gradually, allowing the filter to perform optimal estimation to improve estimation accuracy of EKF. Meanwhile, co-simulation scheme based on MATLAB and Ansoft was proposed in order to improve simulation accuracy. Field-circuit coupling problems of induction motor under the action of vector control were solved and the parameter optimization accuracy was improved dramatically. The simulation and experimental results show that this algorithm has a strong ability to inhibit the random measurement noise. It is able to estimate motor speed accurately, and has superior static and dynamic characteristics.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.3
• /
• pp.158-165
• /
• 2018

Generally, container ships contain cargo holds with cell guides that serve to increase the container loading and unloading efficiency, minimize the space loss, and fix containers during the voyage. This paper describes a new quality management system for the cell guides of container ships (the so-called Trim Cell Guide system). The main functions of this system are the trimming of the point cloud obtained using a 3D scanner and an inspection simulation for cell guide quality. In other words, the raw point cloud of cell guides after construction is measured using a 3D scanner. Here, the raw point cloud contains a lot of noise and unnecessary information. Using the GUI interface supported by the system, the raw point cloud can be trimmed. The trimmed point cloud is used in a simulation for cell guide quality inspection. The RANSAC (Random Sample Consensus) algorithm is used for the transverse section representation of a cell guide at a certain height and applied for the calculation of the intervals between the cell guides and container. When the container hits the cell guides during the inspection simulation, the container is rotated horizontally and checked again for a possible collision. It focuses on a system that can be simulated with the same inspection process as in a shipyard. For a practicality review, we compared the precision data gained from an inspection simulation with the measured data. As a result, it was confirmed that these values were within approximately ${\pm}2mm$.