• 한국세라믹학회지
• /
• 제49권1호
• /
• pp.84-89
• /
• 2012

Attempts were made to develop a stable gray pigment at reducing atmosphere, substituting Ti in $ZrTiO_4$ with Mn, Fe, Co and Cu The pigment synthesized at $1300~1500^{\circ}C$ by solid state method with the composition of $ZrTi_{1-x-y}A_xB_yO_4$ (x = y = 0.005, 0.015, 0.035, 0.055, 0.075, 0.095, 0.115, 0.135, 0.155, 0.175 and 0.195 mole, A = Mn(III), Fe(III), Co(II, III) and Cu(II) (chromophores), B = Sb (counterion). The pigments were fired at $1400^{\circ}C$ for 3 h with substitute amount changes of Mn, Fe, Co and Cu to $ZrTiO_4$ crystals, and analyzed by Raman spectroscopy to figure out substitute limits. Results indicated 0.035 mole for Mn, 0.115 mole for Fe, 0.015 mole for Co and 0.015 mole for Cu as substitute limits, respectively. Figs. 1, 2, 3, and 4 represent each substitute pigments of Mn, Fe, Co and Cu. Synthesized pigment was applied to a lime and a lime-magnesia glaze at 7 wt% each, and fired at reducing atmosphere of $1240^{\circ}C$, soaking time 1h. Gray color was obtained with CIE-$L^*a^*b^*$ values at 44.55, -0.65, 1.19(Mn), 40.36, -0.90, 0.30(Fe), 42.63, -0.03, -1.49(Cu) and -40.79, -0.28, -0.91(Co), respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1446-1449
• /
• 1996

Thin films of diamond-like carbon(DLC) have been deposited using a magnetron plasma-enhanced chemical vapor deposition(PECVD) method with an rf(13.56 MHz) plasma of $C_{3}H_{8}$. From the Langmuir probe I-V characteristics, it can be observed that increasing the magnetic field yields an increase of the temperature($T_e$) and density($N_e$) of electron. At a magnetic field of 82 Gauss, the estimated values of $T_e$ and $N_e$ are approximately $1.5\;{\times}\;10^5$ K(13.5 eV) and $1.3\;{\times}\;10^{11}\;cm^{-3}$, respectively. Such a highly dense plasma can be attributed to the enhanced ionization caused by the cyclotron motion of electrons in the presence of a magnetic field. On the other hand, the negative dc self-bias voltage($-V_{sb}$) decreases with an increasing magnetic field, which is irrespective of gas pressure in the range of $1{\sim}7$ mTorr. This result is well explained by a theoretical model considering the variation of $T_e$. Deposition rates of DLC films increases with a magnetic field. This may be due to the increased mean free path of electrons in the magnetron plasma. Structures of DLC films are examined by using various techniques such as FTIR and Raman spectroscopy. Most of hydrocarbon bonds in DLC films prepared consist of $sp^3$ tetrahedral bonds. Increasing the rf power leads to an enhancement of cross-linking of carbon atoms in DLC films. At approximately 140 W, the maximum film density obtained is about 2.4 $g/cm^3$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.97-98
• /
• 2009

Here, we describe a versatile strategy for precise control of the optoelectrical properties of the single walled carbon nanotube (SWNT)/silane binder hybrid films by noncovalent hybridization. Stable SWNT/silane binder solutions were prepared by direct mixing of high concentration CNT solutions and silane sol solutions. The critical binder content was determined by varying the amount of binder in the SWNT/binder solutions. A binder content of 50 wt% was used to prepare the other SWNT/binder solutions. This study demonstrates how the intermolecular interactions between the SWNTs and the silanes can affect the conductivity of the CNT/binder network films by characterizing the optoelectrical and Raman spectroscopic properties of the SWNT/silane films containing silane binders with various functional groups. The use of the PTMS binder with phenyl groups was found to be most effective in the fabrication of transparent and conductive films on glass substrates. Such a precise control of the optoelectrical properties of SWNT/binder films can be useful to fabricate the high performance conductive thin films, with ramifications for understanding the fundamental intermolecular interaction in carbon materials science.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권12호
• /
• pp.1557-1565
• /
• 2010

Methyl paraben (MP), which is used as a preservative in pharmaceutical and cosmetic (shampoo) products, foods and beverages, enters into the aquatic environment and can pose a potential fish health hazard. In this experiment, effects of MP were evaluated in adult male common carp (Cyprinus carpio) by exposing them to fractions (1/$143^{rd}$ to 1/29th) of the $LC_{50}$ dose with every change of water for 28 days. Vitellogenin induction, metabolic enzymes, somatic indices and bioaccumulation were studied at weekly intervals. The $96^{th}$ h $LC_{50}$ of MP in fingerlings was 120 mg/L. Compared to the control, except for increases (p<0.01) in alkaline phosphatase (EC 3.1.3.1), alanine aminotransferase (EC 2.6.1.2) and liver size, there were decreases (p<0.01) in activity of acid phosphatase (EC 3.1.3.2), aspartate aminotransferase (EC 2.6.1.1), and testiculosomatic index following exposure to any dose of MP. Vitellogenin induction was significantly higher (p<0.01) in exposed than unexposed (control) fish. The bioaccumulation of MP in testis, liver, brain, gills and muscle tissues of fish increased significantly (p<0.01) with increase of dose from 0.84 ppm to 1.68 ppm. Dose and duration of exposure (p<0.01) indicated that an exposure period of 1 to 2 weeks was sufficient to cause changes in the quantifiable parameters studied. Fish exposed to 4.2 ppm MP became lethargic after the $26^{th}$ d. Histologically, degeneration, vacuolization and focal necrotic changes in liver and fibrosis-like changes in testicular tissue were noted.

• 한국버섯학회지
• /
• 제18권3호
• /
• pp.189-200
• /
• 2020

Pleurotus djamor var. roseus is an edible mushroom isolated from the wild and cultivated on paddy straw substrates. The present study was carried out to compare the nutritional composition and antioxidant properties of P. djamor var. roseus at different growth stages (primordia, basidiomata, and mycelia). The protein content was is in the range of 31.48 to 35.50 g/100g dw. The crude fiber content ranged from 8.0 to 14.60 g, and that of total carbohydrates ranged from 44.75 to 48.90 g. Sodium, magnesium, and calcium reached the maximum levels in basidiomata, and selenium was detected in basidiomata and mycelia (0.47 - 0.22 mg/Kg). The amino acid profile showed that all essential and nonessential amino acids and glycine showed maximum levels in basidiomata and 15.98 ± 0.01 g/100g. The fatty acid profile showed the presence of saturated and unsaturated fatty acids; the unsaturated fatty acid content was maximum in all of the samples, ranging from 76 - 40.41%. The total phenol and flavonoid contents as well as the scavenging (DPPH), ferric thiocyanate (FTC), and thiobarbituric acid (TBA) activities in the context of methanol and water extracts from primordia, basidiomata, and mycelium were determined. Among them, basidiomata and mycelial methanol extracts exhibited significant antioxidant activity. Overall, these findings show that P. djamor var. roseus can be used as a functional food for daily consumption.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권10호
• /
• pp.1405-1408
• /
• 2001

Ca salt of soybean oil (PSO) and that of mustard oil plus mahua oil (PMOMO) (50:50) were prepared using double decomposition method, and further tested for their fatty acid composition and degree of saponification. Furthermore, the different levels of protected fat of PSO and PMOMO were evaluated in wheat straw based total mixed ration (TMR) in vitro. Results indicated that capric, lauric, myristic, palmitic, steric, oleic, linoleic, leinolenic acids were traces, traces, traces, 10.00, 2.00, 25.00, 58.50, 5.0% in PSO while the corresponding values in PMOMO were 1.08, 0.28, 0.45, 16.9, 12.95, 44.38, 17.46 and 6.50%, respectively. The degree of saponification of both protected fat supplements was more than 80%. Six treatment combinations were tested I.e., blank without feed and fat supplement (T1); control diet with out fat supplement (T2); control diet plus bypass fat supplement (PSO) so that diet contain 5% fat (T3); control diet plus bypass fat supplement (PSO) so that diet contain 7.5% fat (T4); two more diets viz. T5 and T6 were formulated using bypass fat supplement from PMOMO containing 5 and 7.5% fat respectively. TMR was prepared using 50% concentrate mixture and 50% wheat straw. Result indicated that TVFA, $NH_3-N$,TCA-N, total-N and total gas production were increased in treatment diets at 7.5% level of supplementation, however, fermentation pattern remain similar at 5.0% level of supplementation with respect to control diet. Nevertheless, IVDMD and IVOMD values remained unchanged, rather non-significant at both fat levels and with the both fat sources. On the basis of results it was concluded that Ca-salt of Soybean oil or Mustard plus Mahua oil did not show any negative effect either on digestibility or on microbial protein synthesis in rumen, hence the dietary fat upto 7.5% level in total mixed ration based on wheat straw, could be safely used without any adverse effect on rumen fermentation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.228-228
• /
• 2010

pin-형 비정질 실리콘 태양전지에서 p-층은 창물질로서 전기 전도도가 크고, 빛 흡수가 작어야 한다. p층의 두께가 얇으면 i층에서 충분한 내부전위를 얻을 수 없어 개방전압이 작아진다. 반대로 p-층 두께가 두꺼워지면 p-층 자체에서 빛 흡수가 증가하고, 높은 불순물 농도(> $10^{20}/cm^3$)에 의한 표면재결합이 문제가 되어 변환효율이 감소한다. 밴드갭이 큰 물질로 창층을 만들면 짧은 파장의 입사광이 직접 i-층을 비추므로 단락전류와 곡선인자를 증가시킬 수 있다. 본 실험에서는 비정질 실리콘 증착과 박막 특성 분석을 위하여, $5cm{\times}5cm$ 크기의 eagle 2000 glass(유리)와 p형 실리콘 wafer가 사용되었다. 투과도, 흡수도, Raman, 암전도도 와 광전도도 특성 측정에 유리 기판에 증착된 박막을, 두께 측정, FTIR 측정에는 실리콘 기판에 증착된 박막이 각각 사용되었다. p형 비정질 실리콘 증착에는 $SiH_4$, $H_2$, $B_2H_6$ 가스를 사용하였고, 플라즈마 형성에는 13.56MHz의 RF 소스가 사용하였다.p층은 $SiH_4$ 가스와 $H_2$ 가스비가 1:5인 조건에서 $B_2H_6$을 도핑하여 형성하였다. $B_2H_6$가스량을 변화시키며 형성하였으며, $B_2H_6$가스량이 증가함에 따라 암전도도가 증가하였으나, 광학적 밴드갭이 감소하였다. $H_2/SiH_4$ 가스 비가 0.001일 때 밴드갭은 1.76으로 i층보다 높게 형성되었으며, 암전도도는 $10^{-7}$이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.361.2-361.2
• /
• 2014

Transition metal dichalcogenides (MoS2, WS2, WSe2, MoSe2, NbS2, NbSe2, etc.) are layered materials that can exhibit semiconducting, metallic and even superconducting behavior. In the bulk form, the semiconducting phases (MoS2, WS2, WSe2, MoSe2) have an indirect band gap. Recently, these layered systems have attracted a great deal of attention mainly due to their complementary electronic properties when compared to other two-dimensional materials, such as graphene (a semimetal) and boron nitride (an insulator). However, these bulk properties could be significantly modified when the system becomes mono-layered; the indirect band gap becomes direct. Such changes in the band structure when reducing the thickness of a WS2 film have important implications for the development of novel applications, such as valleytronics. In this work, we report for the controlled synthesis of large-area (~cm2) single-, bi-, and few-layer WS2 using a two-step process. WOx thin films were deposited onto a Si/SiO2 substrate, and these films were then sulfurized under vacuum in a second step occurring at high temperatures ($750^{\circ}C$). Furthermore, we have developed an efficient route to transfer these WS2 films onto different substrates, using concentrated HF. WS2 films of different thicknesses have been analyzed by optical microscopy, Raman spectroscopy, and high-resolution transmission electron microscopy.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.376.1-376.1
• /
• 2014

그래핀은 차세대 2차원 물질로서 지금까지 활발히 연구되어 왔으나 밴드갭이 없기 때문에 전자소자로서의 응용이 매우 제한적이다. 최근에 그래핀을 대체할 수 있는 물질로서 Transition Metal Dichalcogenides (TMDs)가 주목을 받고 있다. 특히, TMDs 중에서 $MoS_2$는 bulk일 때 indirect한 1.2 eV인 밴드 갭을 갖고 있으나, layer가 줄어들면서 direct한 1.8 eV인 밴드갭을 가진다. 국내외 여러 연구 그룹에서 $MoS_2$를 이용하여 제작한 Field Effect Transistor (FET)는 high-$\small{K}$ gate가 산입되지 않은 경우에 on-off ratio와 mobility가 각각 $10^6$와 약 $3cm^2/Vs$로 나타나고 있다. 이와 같이 아주 우수한 전기적, 광학적 특성을 갖는 소자 응용성을 가지고 있다. 최근까지의 연구결과들은 대부분 mechanical exfoliation method (MEM) 로 제작된 $MoS_2$ monolayer를 이용하였으나, 이 방법은 large scale 및 layer controllable에는 적합하지 않다. 본 연구에서는 대면적의 집적회로 응용에 적합한 chemical vapor deposition법을 이용하여 $MoS_2$를 성장하였다. 높은 결정성을 위해 sulphur (powder purity 99.99%)와 molybdenum trioxide(powder purity 99.9%)를 이용하고, Ar 가스 분위기에서 sulphur powder 및 molybdenum trioxide powder를 각각 $130^{\circ}C$ 및 $1000^{\circ}C$로 유지하며 $MoS_2$ 박막을 성장하였다. 성장된 $MoS_2$ 박막은 Atomic force Microscopy (AFM)을 통해 박막의 단차와 roughness을 확인하였다. 또한, X-ray Diffraction (XRD) pattern 분석으로 박막의 결정성을 확인하였으며, Raman Spectroscopy, X-ray Photoelectron Spectroscopy (XPS), Photoluminescence (PL) 측정으로 광학적 특성을 분석하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.218.2-218.2
• /
• 2014

그래핀은 높은 전기 전도도와 열전도도, 기계적 강도를 가지고 있고 동시에 높은 전자이동도($200,000cm^2{\cdot}V{\cdot}^1{\cdot}s{\cdot}^1$) 특성을 갖는 물질로써 차세대 소재로 각광받고 있다. 하지만 그래핀을 소자에 응용하기 위해서는 전사공정과 lithography 공정 과정에서 발생되는 PMMA(Poly methyl methacrylate) residue를 완벽하게 제거해야 하는 문제점이 있다. 특히, lithography 공정 중 완벽하게 PMMA residue 가 제거되지 않고 잔류해 있을 경우에 소자의 life time, performance에 악영향을 준다는 보고가 있다. 이와같은 문제를 해결하기 위해 화학적 cleaning, 열처리를 통한 cleaning, 전류 인가에 의한 cleaning과 같은 방법들을 이용하여 그래핀의 PMMA residue를 제거하는 공정들이 보고되고 있지만, 화학적 cleaning 방법의 경우 chloroform 이라는 독성물질 사용으로 인해 산업적으로 응용이 어렵고, 열처리 방법은 전극 등의 금속이 $200^{\circ}C$ 이상의 높은 온도에서 장시간 노출될 경우 쉽게 손상을 입으며, 전류 인가에 의한 cleaning 방법은 국부적으로만 효과를 볼 수 있기 때문에 lithography 공정 후 PMMA residue를 효과적으로 제거하기에는 한계를 보이고 있다. 본 연구에서는 Ar을 이용하는 Ion beam 시스템을 통해 beam energy를 제어함으로써 PMMA residue를 효과적으로 제거하는 연구를 진행하였다. 최적화된 플라즈마 발생 조건을 찾기 위해 QMS(Quadrupole Mass Spectrometer)를 이용하여 입사하는 ion energy와 flux 양을 컨트롤 하였고, 250 W에서 최적화된 ion energy distribution 영역이 존재한다는 것을 확인할 수 있었다. 또한, 25 Gauss 정도의 electro-magnetic field를 이용하여 Ar의 ion energy를 10 eV 이하로 낮추어 damage를 최소화함으로써 효과적으로 그래핀을 cleaning 할 수 있었다. Cleaning과정에서 ion bombardment에 의해 발생한 damage는 $250^{\circ}C$에서 6시간 동안 annealing 공정을 거치면서 회복되는 것을 Raman spectroscopy의 D peak ($1335cm{\cdot}^1$) / G peak ($1572cm{\cdot}^1$) ratio 로 확인할 수 있었고, PMMA residue의 cleaning 여부는 G peak ($1580cm{\cdot}^1$)의 blue shift와 2D peak ($2670cm{\cdot}^1$)의 red shift를 통해 확인하였다. 그리고 AFM (Atomic Force Microscopy)을 이용하여 cleaning 공정과정에서 RMS roughness가 4.99 nm에서 2.01 nm로 감소하는 것을 관찰하였다. 마지막으로, PMMA residue의 cleaning 정도를 정량적으로 분석하기 위해 XPS (X-ray Photoelectron Spectroscopy)를 이용하여 sp2 C-C bonding이 74.96%에서 87.66%로 증가함을 확인을 할 수 있었다.