• Title/Summary/Keyword: raman

Search Result 2,105, Processing Time 0.025 seconds

SERS Immunoassay Using Microcontact Printing for Application of Sensitive Biosensors

  • Hong, Won-Jin;Seo, Hyeong-Kuyn;Jung, Young-Mee
    • Bulletin of the Korean Chemical Society
    • /
    • v.32 no.12
    • /
    • pp.4281-4285
    • /
    • 2011
  • We introduced a promising patterned substrate by using a microcontact printing method that can be used for SERS immunoassays based on antigen-antibody binding. SERS spectrum of the Raman reporter with antibody, which is rhodamine 6G (R6G) adsorbed on colloidal gold nanoparticles, was observed only for the surfaces in which prostate-specific antigen (PSA) is present on the substrate that is attached to an immobilized layer of antibody on the gold nanoparticles layer of the patterned substrate. Raman mapping images clearly showed that the antibodies on the Raman reporter were successfully and selectively conjugated with the antigen on the patterned substrate. This method could be potentially extended to multi-protein detections and ultrasensitive biosensors.

ESR과 Raman을 이용한 a-C:H 박막의 구조 분석

  • 조영옥;노옥환;차옥환;서은경;이정근
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1999.07a
    • /
    • pp.56-56
    • /
    • 1999
  • 수소화된 비정질 탄소(a-C:H0는 그 형성 조건에 따라서 여러 가지 다른 구조와 특성을 갖게 되며, 특히 DLC(diamond-like carbon)-FED(field emission display) 개발 면에서 중요하게 연구되고 있다. 본 연구에서는 a-C:H 박막을 PECVD(plasma-enhanced chemical vapor deposition) 방법으로 증착하고 주고 ESR 및 Raman 측정을 통하여 그 결과를 조사해 보았다. PECVD 증착가스는 CH4 가스를 사용하였다. 기판은 Corning 1737 glass를 사용하였고, 기판 온도는 32$0^{\circ}C$이었다. 증착 압력과 R>F. power는 각각 0.1-1 Torr 와 12-36 W 사이에서 변화되었다. ESR를 피하기 위하여, microwave power에 대한 ESR 신호 의존성을 측정하고 포화효과를 피하기 위한 Raman spectroscopy로 분석하였다. R.F.power가 증가할수록 증착속도는 0.06 nm/sec 정도까지 대체로 증가하였으나, pressure가 1 Torr 일때는 같은 R.F. power로써 증착이 일어나지 않는 경우도 발생하였다. 증착된 a-C:H 박막은 R.F.power가 증가할수록 스핀밀도의 증가가 두드러졌으며, 기타 증착가스 압력 등의 증착 조건에 따른 ESR 및 Raman 스펙트럼의 변화를 관찰하였다.

  • PDF

Fiber Raman Laser and its Application to Measurement of Optical Fiber Dispersion Characteristics (광섬유 라만 레이저와 광섬유의 분산 특성 측정에의 응용)

  • 정영철;신상영
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.21 no.1
    • /
    • pp.38-44
    • /
    • 1984
  • Subnanosecond optical pulses with 0.8-1.Bum wavelength are generated by experimentally realizing a single pass fiber Raman laser. This fiber Raman laser is pumped by a mode-locked and Q-switched Nd-YAG laser. Two wave sum frequency phenomenon is also obsenred in the course of the experimental work. The fiber Raman laser is then used to measure dispersion characteristics of a sin\ulcorner mode fiber in the long-wavelength lesion.

  • PDF

FT-IR and Raman Spectroscopy for the Interaction between Poly(2-hydroxyethylmethacrylate) and Amino Acids (Poly(2-hydroxyethylmethacrylate)와 아미노산과의 상호작용에 관한 FT-IR과 Raman 분광학적 연구(II))

  • 김의락;정봉진
    • KSBB Journal
    • /
    • v.11 no.5
    • /
    • pp.557-564
    • /
    • 1996
  • The interaction between poly(2-hydroxyethylmethacrylate)(poly(HEMA)) which is a material of contact lens containing approximately 45%o water and water soluble amino acids (alanine, arginine, glycine, lysine, methionine, proline, and serine) was investigated by using FT-IR and Raman spectroscopy. The results revealed that arginine and lysine had the strongest interaction with poly(HEMA) among amino acids. The interaction depended on the quantity of charges on ammo acids. They interacted predominately with hydroxyl groups in poly(HEMA).

  • PDF

Study on Interfacial Reactions between Graphite Electrode and PC-base Electrolyte by In-situ AFM and In-situ Raman (In-situ 전기화학 AFM 및 Raman 분석방법을 이용한 흑연음극과 PC계 전해질 계면반응의 해석)

  • Song, Hee-Youb;Jeong, Soon-Ki;Kim, Yang-Su
    • Proceedings of the KAIS Fall Conference
    • /
    • 2011.05a
    • /
    • pp.155-157
    • /
    • 2011
  • 본 논문에서는 In-situ 전기화학 AFM과 In-situ 전기화학 Raman을 주된 분석방법으로 리튬 이차전지의 흑연 음극과 PC계 전해질 계면에서의 반응을 이해하고자 하였다. In-situ 전기화학 AFM 분석방법을 통하여 PC계 전해질에서 용매화된 리튬의 삽입/탈리반응이 진행되는 것을 확인할 수 있었으며 In-situ 전기화학 Raman 분석방법을 이용하여 PC계 전해질에서는 삼원계 Li-GIC가 생성되는 것을 확인할 수 있었다.

  • PDF

On the Optimization of Raman Fiber Amplifier using Genetic Algorithm in the Scenario of a 64 nm 320 Channels Dense Wavelength Division Multiplexed System

  • Singh, Simranjit;Saini, Sonak;Kaur, Gurpreet;Kaler, Rajinder Singh
    • Journal of the Optical Society of Korea
    • /
    • v.18 no.2
    • /
    • pp.118-123
    • /
    • 2014
  • For multi parameter optimization of Raman Fiber Amplifier (RFA), a simple genetic algorithm is presented in the scenario of a 320 channel Dense Wavelength Division Multiplexed (DWDM) system at channel spacing of 25 GHz. The large average gain (> 22 dB) is observed from optimized RFA with the optimized parameters, such as 39.6 km of Raman length with counter-propagating pumps tuned to 205.5 THz and 211.9 THz at pump powers of 234.3 mW, 677.1 mW respectively. The gain flattening filter (GFF) has also been optimized to further reduce the gain ripple across the frequency range from 190 to 197.975 THz for broadband amplification.

Optimizing the Net Gain of a Raman-EDFA Hybrid Optical Amplifier using a Genetic Algorithm

  • Singh, Simranjit;Kaler, Rajinder Singh
    • Journal of the Optical Society of Korea
    • /
    • v.18 no.5
    • /
    • pp.442-448
    • /
    • 2014
  • For the first time, a novel analytical model of the net gain for a Raman-EDFA hybrid optical amplifier (HOA) is proposed and its various parameters optimized using a genetic algorithm. Our method has been shown to be robust in the simultaneous analysis of multiple parameters (Raman length, EDFA length, and pump powers) to obtain large gain. The optimized HOA is further investigated at the system level for the scenario of a 50-channel DWDM system with 0.2-nm channel spacing. With an optimized HOA, a flat gain of >17 dB is obtained over the effective ITU-T wavelength grid with a variation of less than 1.5 dB, without using any gain-flattening technique. The obtained noise figure is also the lowest value ever reported for a Raman-EDFA HOA at reduced channel spacing.

Surface-Enhanced Raman Scattering of Benzenethiol Adsorbed on Silver-Exchanged Copper Powders

  • Shin, Kuan-Soo;Ryoo, Hyun-Woo;Lee, Yoon-Mi;Kim, Kwan
    • Bulletin of the Korean Chemical Society
    • /
    • v.29 no.2
    • /
    • pp.445-449
    • /
    • 2008
  • Micrometer-sized copper (mCu) powders are weakly surface-enhanced Raman scattering (SERS) active by the excitation at 632.8 nm, but nearly ineffective as a SERS substrate at 514.5 nm excitation. The SERS activity of mCu powders at both excitation wavelengths can be increased dramatically by a simple method of the galvanic exchange reaction with AgNO3 in aqueous medium. In this work, the SERS activity of the Ag-exchanged Cu powders (mCu@Ag) has been evaluated by taking a series of Raman spectra using benzenethiol (BT) as the probe molecule. It is clearly confirmed by field emission scanning electron microscopy and X-ray diffractometry that the SERS activity of mCu@Ag powders is, in fact, highly dependent on the extent of galvanic reaction.

Growth and Characteristic Infrared Raman Spectra of Potassium Lithium Niobate Single Crystals

  • Youbao Wan;Yoo, Sang-Im
    • Proceedings of the Korea Crystallographic Association Conference
    • /
    • 2002.11a
    • /
    • pp.15-15
    • /
    • 2002
  • Homogeneous and crack-free potassium lithium niobate (K₃Li/sub 2-x/Nb/sub 5+x/O/sub 15/, 0<x<0.5, KLN) single crystals were successfully grown by the Czochralski technique. The KLN single crystals of several different compositions were employed for the investigation of the lattice vibration spectra using infrared Raman spectroscopy. The characteristic Raman spectra of the [NbO/sub 6/]/sup 7-/ octahedral ions were strikingly influenced by the Li ion content. The symmetric stretch vibrational modes V₁, V₂ are broadened, and the symmetric bend vibration mode V/sub 5/ is broadened and even split into three peaks with increasing the Li content, supporting that the bend vibration modes of the [NbO/sub 6/]/sup 7-/ octahedrons are obviously perturbed by Li ions in the C site. Enhanced Raman peak intensities after the post annealing at 900℃ and for 24 h evidenced that a residual stress in as-grown crystals was negligible and only a defect concentration might be reduced.

  • PDF

Surface-enhanced Raman Spectroscopy of Ethephone Adsorbed on Silver Surface

  • Lee, Chul-Jae;Kim, Hee-Jin;Karim, Mohammad Rezaul;Lee, Mu-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • v.27 no.4
    • /
    • pp.545-548
    • /
    • 2006
  • We investigated the Surface-enhanced Raman Spectroscopy (SERS) spectrum of ethephone (2-chloroethylphosphonic acid). We observed significant signals in the ordinary Raman spectrum for solid-state ethephone as well as when it was adsorbed on a colloidal silver surface, strong vibrational signals were obtained at a very low concentration. The SERS spectra were obtained by silver colloids that were prepared by the $\gamma$-irradiation method. The influence of pH and the influence of anion $(Cl^-,\;Br^-,\;I^-)$ on the adsorption orientation were investigated. Two different adsorption mechanisms were deduced, depending on the experimental conditions. The chlorine atom or the chlorine and two oxygen atoms were adsorbed on the colloidal silver surface. Among halide ions, $Br^-$ and $I^-$ were more strongly adsorbed on the colloidal silver surfaces. As a result, the adsorption of ethephone was less effective due to their steric hinderance.